RESUMEN
Conventional industrial frying systems are not optimised towards homogeneous product quality, which is partly related to poor oil distribution across the packed bed of fries. In this study we investigate an alternative frying system with an oil cross-flow from bottom to top through a packed bed of fries. Fluidization of rectangular fries during frying was characterised with a modified Ergun equation. Mixing was visualized by using two coloured layers of fries and quantified in terms of mixing entropy. Smaller fries mixed quickly during frying, while longer fries exhibited much less mixing, which was attributed to the higher minimum fluidization velocity and slower dehydration for longer fries. The cross-flow velocity was found an important parameter for the homogeneity of the moisture content of fries. Increased oil velocities positively affected moisture distribution due to a higher oil refresh rate. However, inducing fluidization caused the moisture distribution to become unpredictable due to bed instabilities.
RESUMEN
Crust formation is an important factor in determining the crispness of French fries. This study aimed at unravelling detailed structural and textural properties of the crust in relation to crispness during frying as a function of the process temperature and time. X-ray tomography showed a larger overall pore volume at higher frying times, while a lower final moisture content mainly resulted in an increase in the amount of large pores. Texture analysis revealed that the increase in porosity, due to the increased formation of pores, results in a more crispy behaviour after frying with oil of up to 180°C. At temperatures above 180°C crispness is actually found to decrease again, which is explained by the increased plastic behaviour of the crust. This may be related to the reduced glass transition temperature of the crust because of increased sugar degradation at a very high temperature.