RESUMEN
The advantages of additive manufactured scaffolds, as custom-shaped structures with a completely interconnected and accessible pore network from the micro- to the macroscale, are nowadays well established in tissue engineering. Pore volume and architecture can be designed in a controlled fashion, resulting in a modulation of scaffold's mechanical properties and in an optimal nutrient perfusion determinant for cell survival. However, the success of an engineered tissue architecture is often linked to its surface properties as well. The aim of this study was to create a family of polymeric pastes comprised of poly(ethylene oxide therephthalate)/poly(butylene terephthalate) (PEOT/PBT) microspheres and of a second biocompatible polymeric phase acting as a binder. By combining microspheres with additive manufacturing technologies, we produced 3D scaffolds possessing a tailorable surface roughness, which resulted in improved cell adhesion and increased metabolic activity. Furthermore, these scaffolds may offer the potential to act as drug delivery systems to steer tissue regeneration.
RESUMEN
The functionalization of biomaterials substrates used for cell culture is gearing towards an increasing control over cell activity. Although a number of biomaterials have been successfully modified by different strategies to display tailored physical and chemical surface properties, it is still challenging to step from 2D substrates to 3D scaffolds with instructive surface properties for cell culture and tissue regeneration. In this study, additive manufacturing and thermally induced phase separation are combined to create 3D scaffolds with tunable surface morphology from polymer gels. Surface features vary depending on the gel concentration, the exchanging temperature, and the nonsolvent used. When preosteoblasts (MC-3T3 cells) are cultured on these scaffolds, a significant increase in alkaline phosphatase activity is measured for submicron surface topography, suggesting a potential role on early cell differentiation.
Asunto(s)
Ingeniería de Tejidos/instrumentación , Andamios del Tejido/química , Animales , Materiales Biocompatibles/química , Polímeros/química , Propiedades de SuperficieRESUMEN
The aim of this study was to evaluate the effect of carboxymethylcellulose (CMC) as a pore generator and hydroxyapatite (HA) as an osteoconductive agent on the physicochemical properties and in-vitro mineralization ability of porous polymethylmethacrylate (PMMA) cement. To this end, various compositions of PMMA cements, which differed in amount of millimeter-sized hydroxyapatite (HA) particles and CMC hydrogel, were prepared and immersed into simulated body fluid (SBF) for 0, 7, 14, 21 and 28 days. It was demonstrated that the incorporation of CMC hydrogel decreased the maximum temperature of cement to the normal body temperature and prolonged the handling time during polymerization. Further, the amount of CMC was responsible for the creation of porosity and interconnectivity, which in turn determined the final mechanical properties of cements. The loaded HA particles enhanced the potential bioactivity of cement for bone ingrowth. Albeit different amount of HA particles influenced their final exposures on the surface of cured cement, all of the three amounts of HA did not weaken the final mechanical properties of cements. The data here suggests that the HA particle loaded porous PMMA cement can serve as the promising candidate for bone reconstruction.
Asunto(s)
Líquidos Corporales/química , Cementos para Huesos/química , Durapatita/química , Polimetil Metacrilato/química , Humanos , PorosidadRESUMEN
The main goal of this study was to evaluate the effects of incorporation of calcium phosphate (CaP) particles on the physicochemical properties and mineralization capacity of cements in vitro. Herein, two different types of CaP particles were loaded into polymethylmethacrylate (PMMA) cements exhibiting an interconnected porosity created by mixing with carboxymethylcellulose. The incorporation of CaP particles did not influence the maximum polymerization temperature of the porous PMMA, but reduced the porosity and the average pore size. Small CaP particles formed agglomerations within the PMMA pores, whereas big CaP particles were partially embedded in the PMMA matrix and partially exposed to the pores. Both types of CaP particles enhanced the mineralization capacity of PMMA cement without compromising their mechanical properties. The data presented herein suggest that porous PMMA/CaP cements hold strong promise for surgical application in bone reconstruction.
Asunto(s)
Materiales Biocompatibles/química , Cementos para Huesos/química , Fosfatos de Calcio/química , Polimetil Metacrilato/química , Carboximetilcelulosa de Sodio/química , Fuerza Compresiva , Cristalización , Módulo de Elasticidad , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Plasma , Polimerizacion , Porosidad , Soluciones , Temperatura , Difracción de Rayos XRESUMEN
UNLABELLED: Mosaicplasty has become a well-accepted treatment modality for articular cartilage lesions in the knee. Postoperative bleeding remains potentially concerning. This study evaluates the porous poly(ethylene oxide)terephthalate/poly(butylene terephthalate) (PEOT/PBT) implants used for donor site filling. Empty donor sites were the controls. After 9 months, MRI, macroscopical and histological analysis were carried out. Treated defects did not cause postoperative bleeding. No adverse events or inflammatory response was observed. PEOT/PBT implants were well integrated. Empty controls occasionally showed protrusion of repair tissue at the defect margins. Surface stiffness was minimally improved compared to controls. Existing polymer fragments indicated considerable biodegradation. Histological evaluation of the filled donor sites revealed congruent fibrocartilaginous surface repair with proteoglycan-rich domains and subchondral cancellous bone formation with interspersed fibrous tissue in all implanted sites. The PEOT/PBT implants successfully reduce donor site morbidity and postoperative bleeding after mosaicplasty. LEVEL OF EVIDENCE: II.
Asunto(s)
Materiales Biocompatibles/uso terapéutico , Cartílago Articular/cirugía , Articulación de la Rodilla/cirugía , Poliésteres/uso terapéutico , Polietilenglicoles/uso terapéutico , Implantes Absorbibles , Adulto , Artroplastia/efectos adversos , Artroplastia/métodos , Materiales Biocompatibles/efectos adversos , Cartílago Articular/diagnóstico por imagen , Femenino , Estudios de Seguimiento , Humanos , Implantes Experimentales , Imagen por Resonancia Magnética , Masculino , Poliésteres/efectos adversos , Polietilenglicoles/efectos adversos , Tereftalatos Polietilenos , Hemorragia Posoperatoria/prevención & control , Radiografía , Andamios del Tejido , Trasplante Autólogo/efectos adversos , Trasplante Autólogo/métodos , Adulto JovenRESUMEN
Scaffolds for osteochondral tissue engineering should provide mechanical stability, while offering specific signals for chondral and bone regeneration with a completely interconnected porous network for cell migration, attachment, and proliferation. Composites of polymers and ceramics are often considered to satisfy these requirements. As such methods largely rely on interfacial bonding between the ceramic and polymer phase, they may often compromise the use of the interface as an instrument to direct cell fate. Alternatively, here, we have designed hybrid 3D scaffolds using a novel concept based on biomaterial assembly, thereby omitting the drawbacks of interfacial bonding. Rapid prototyped ceramic particles were integrated into the pores of polymeric 3D fiber-deposited (3DF) matrices and infused with demineralized bone matrix (DBM) to obtain constructs that display the mechanical robustness of ceramics and the flexibility of polymers, mimicking bone tissue properties. Ostechondral scaffolds were then fabricated by directly depositing a 3DF structure optimized for cartilage regeneration adjacent to the bone scaffold. Stem cell seeded scaffolds regenerated both cartilage and bone in vivo.
Asunto(s)
Cartílago Articular/fisiología , Andamios del Tejido/química , Animales , Matriz Ósea/citología , Matriz Ósea/fisiología , Adhesión Celular , Agregación Celular , Cerámica , Indicadores y Reactivos , Ratones , Ratones Desnudos , Microscopía Electrónica de Rastreo , Regeneración , Espectroscopía Infrarroja por Transformada de Fourier , Ingeniería de Tejidos/métodos , Difracción de Rayos XRESUMEN
Organ or tissue printing, a novel approach in tissue engineering, creates layered, cell-laden hydrogel scaffolds with a defined three-dimensional (3D) structure and organized cell placement. In applying the concept of tissue printing for the development of vascularized bone grafts, the primary focus lies on combining endothelial progenitors and bone marrow stromal cells (BMSCs). Here we characterize the applicability of 3D fiber deposition with a plotting device, Bioplotter, for the fabrication of spatially organized, cell-laden hydrogel constructs. The viability of printed BMSCs was studied in time, in several hydrogels, and extruded from different needle diameters. Our findings indicate that cells survive the extrusion and that their subsequent viability was not different from that of unprinted cells. The applied extrusion conditions did not affect cell survival, and BMSCs could subsequently differentiate along the osteoblast lineage. Furthermore, we were able to combine two distinct cell populations within a single scaffold by exchanging the printing syringe during deposition, indicating that this 3D fiber deposition system is suited for the development of bone grafts containing multiple cell types.
Asunto(s)
Células de la Médula Ósea/citología , Sustitutos de Huesos , Diferenciación Celular , Células Endoteliales/citología , Hidrogeles , Osteoblastos/citología , Células Madre/citología , Animales , Supervivencia Celular , Cabras , Células del Estroma/citología , Ingeniería de TejidosRESUMEN
In this study, porous 3D fiber deposition titanium (3DFT) and 3DFT combined with porous biphasic calcium phosphate ceramic (3DFT+BCP) implants, both bare and 1 week cultured with autologous bone marrow stromal cells (BMSCs), were implanted intramuscularly and orthotopically in 10 goats. To assess the dynamics of bone formation over time, fluorochrome markers were administered at 3, 6 and 9 weeks and the animals were sacrificed at 12 weeks after implantation. New bone in the implants was investigated by histology and histomorphometry of non-decalcified sections. Intramuscularly, no bone formation was found in any of the 3DFT implants, while a very limited amount of bone was observed in 2 BMSC 3DFT implants. 3DFT+BCP and BMSC 3DFT+BCP implants showed ectopic bone formation, in 8 and 10 animals, respectively. The amount of formed bone was significantly higher in BMSC 3DFT+BCP as compared to 3DFT+BCP implants. Implantation on transverse processes resulted in significantly more bone formation in composite structure as compared to titanium alloy alone, both with and without cells. Unlike intramuscularly, the presence of BMSC did not have a significant effect on the amount of new bone either in metallic or in composite structure. Although the 3DFT is inferior to BCP for bone growth, the reinforcement of the brittle BCP with a 3DFT cage did not negatively influence osteogenesis, osteoinduction and osteoconduction as previously shown for the BCP alone. The positive effect of BMSCs was observed ectopically, while it was not significant orthotopically.
Asunto(s)
Sustitutos de Huesos/química , Fosfatos de Calcio/química , Implantes Experimentales , Trasplante de Células Madre Mesenquimatosas/instrumentación , Trasplante de Células Madre Mesenquimatosas/métodos , Osteogénesis/fisiología , Titanio/química , Animales , Células Cultivadas , Femenino , Cabras , Ensayo de MaterialesRESUMEN
The advantage of using anatomically shaped scaffolds as compared to modeled designs was investigated and assessed in terms of cartilage formation in an artificial tracheal construct. Scaffolds were rapid prototyped with a technique named three-dimensional fiber deposition (3DF). Anatomical scaffolds were fabricated from a patient-derived computerized tomography dataset, and compared to cylindrical and toroidal tubular scaffolds. Lewis rat tracheal chondrocytes were seeded on 3DF scaffolds and cultured for 21 days. The 3-(4,5-dimethylthiazol-2yl)-2,5-dyphenyltetrazolium bromide (MTT) and sulfated glycosaminoglycan (GAG) assays were performed to measure the relative number of cells and the extracellular matrix (ECM) formed. After 3 weeks of culture, the anatomical scaffolds revealed a significant increase in ECM synthesis and a higher degree of differentiation as shown by the GAG/MTT ratio and by scanning electron microscopy analysis. Interestingly, a lower scaffold's pore volume and porosity resulted in more tissue formation and a better cell differentiation, as evidenced by GAG and GAG/MTT values. Scaffolds were compliant and did not show any signs of luminal obstruction in vitro. These results may promote anatomical scaffolds as functional matrices for tissue regeneration not only to help regain the original shape, but also for their improved capacity to support larger tissue formation.
Asunto(s)
Órganos Artificiales , Técnicas de Cultivo de Célula/métodos , Condrocitos/citología , Condrocitos/fisiología , Poliésteres/química , Polietilenglicoles/química , Tráquea/citología , Tráquea/crecimiento & desarrollo , Animales , Células Cultivadas , Ratas , Ratas Endogámicas Lew , Ingeniería de TejidosRESUMEN
Organ printing, a novel approach in tissue engineering, applies layered computer-driven deposition of cells and gels to create complex 3-dimensional cell-laden structures. It shows great promise in regenerative medicine, because it may help to solve the problem of limited donor grafts for tissue and organ repair. The technique enables anatomical cell arrangement using incorporation of cells and growth factors at predefined locations in the printed hydrogel scaffolds. This way, 3-dimensional biological structures, such as blood vessels, are already constructed. Organ printing is developing fast, and there are exciting new possibilities in this area. Hydrogels are highly hydrated polymer networks used as scaffolding materials in organ printing. These hydrogel matrices are natural or synthetic polymers that provide a supportive environment for cells to attach to and proliferate and differentiate in. Successful cell embedding requires hydrogels that are complemented with biomimetic and extracellular matrix components, to provide biological cues to elicit specific cellular responses and direct new tissue formation. This review surveys the use of hydrogels in organ printing and provides an evaluation of the recent advances in the development of hydrogels that are promising for use in skeletal regenerative medicine. Special emphasis is put on survival, proliferation and differentiation of skeletal connective tissue cells inside various hydrogel matrices.
Asunto(s)
Sustitutos de Huesos , Matriz Extracelular , Hidrogeles , Regeneración , Ingeniería de Tejidos/tendencias , Animales , Tejido Conectivo , HumanosRESUMEN
3D fiber deposition is a technique that allows the development of metallic scaffolds with accurately controlled pore size, porosity and interconnecting pore size, which in turn permits a more precise investigation of the effect of structural properties on the in vivo behavior of biomaterials. This study analyzed the in vivo performance of titanium alloy scaffolds fabricated using 3D fiber deposition. The titanium alloy scaffolds with different structural properties, such as pore size, porosity and interconnecting pore size were implanted on the decorticated transverse processes of the posterior lumbar spine of 10 goats. Prior to implantation, implant structure and permeability were characterized. To monitor the bone formation over time, fluorochrome markers were administered at 3, 6 and 9 weeks and the animals were sacrificed at 12 weeks after implantation. Bone formation in the scaffolds was investigated by histology and histomorphometry of non-decalcified sections using traditional light- and epifluorescent microscopy. In vivo results showed that increase of porosity and pore size, and thus increase of permeability of titanium alloy implants positively influenced their osteoconductive properties.
Asunto(s)
Huesos/fisiología , Prótesis e Implantes , Titanio , Aleaciones , Animales , Materiales Biocompatibles/química , Regeneración Ósea , Huesos/anatomía & histología , Cabras , Microscopía Electrónica de Rastreo , Microscopía Fluorescente , Osteogénesis , Porosidad , Ingeniería de Tejidos/métodosRESUMEN
Hollow fibers find useful applications in different disciplines like fluid transport and purification, optical guidance, and composite reinforcement. In tissue engineering, they can be used to direct tissue in-growth or to serve as drug delivery depots. The fabrication techniques currently available, however, do not allow to simultaneously organize them into three-dimensional (3D) matrices, thus adding further functionality to approach more complicated or hierarchical structures. We report here the development of a novel technology to fabricate hollow fibers with controllable hollow cavity diameter and shell thickness. By exploiting viscous encapsulation, a rheological phenomenon often undesired in molten polymeric blends flowing through narrow ducts, fibers with a shell-core configuration can be extruded. Hollow fibers are then obtained by selective dissolution of the inner core polymer. The hollow cavity diameter and the shell thickness can be controlled by varying the polymers in the blend, the blend composition, and the extrusion nozzle diameter. Simultaneous with extrusion, the extrudates are organized into 3D matrices with different architectures and custom-made shapes by 3D fiber deposition, a rapid prototyping tool which has recently been applied for the production of scaffolds for tissue engineering purposes. Applications in tissue engineering and controlled drug delivery of these constructs are presented and discussed.
Asunto(s)
Materiales Biocompatibles , Polímeros/química , Sistemas de Liberación de Medicamentos , Microscopía Electrónica de RastreoRESUMEN
Electrospinning (ESP) has lately shown a great potential as a novel scaffold fabrication technique for tissue engineering. Scaffolds are produced by spinning a polymeric solution in fibers through a spinneret connected to a high-voltage electric field. The fibers are then collected on a support, where the scaffold is created. Scaffolds can be of different shapes, depending on the collector geometry, and have high porosity and high surface per volume ratio, since the deposited fibers vary from the microscale to the nanoscale range. Such fibers are quite effective in terms of tissue regeneration, as cells can bridge the scaffold pores and fibers, resulting in a fast and homogeneous tissue growth. Furthermore, fibers can display a nanoporous ultrastructure due to solvent evaporation. The aim of this study was to characterize electrospun scaffolds from poly(ethylene oxide terephthalate)-poly(butylene terephthalate) (PEOT/PBT) copolymers and to unravel the mechanism of pore formation on the fibers. The effect of different fiber diameters and of their surface nanotopology on cell seeding, attachment, and proliferation was studied. Smooth fibers with diameter of 10microm were found to support an optimal cell seeding and attachment within the micrometer range analyzed. Moreover, a nanoporous surface significantly enhanced cell proliferation and cells spreading on the fibers. The fabrication of ESP scaffolds with incorporated dyes with different molecular dimensions is also reported and their release measured. These findings contribute to the field of cell-material interaction and lead to the fabrication of "smart" scaffolds which can direct cells morphology and proliferation, and eventually release biological signals to properly conduct tissue formation.
Asunto(s)
Proliferación Celular/efectos de los fármacos , Células Madre Mesenquimatosas/efectos de los fármacos , Polietilenglicoles/farmacología , Ingeniería de Tejidos/métodos , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Medios de Cultivo/farmacología , Humanos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Microscopía Electrónica de Rastreo , Polietilenglicoles/química , Porosidad , Ingeniería de Tejidos/instrumentaciónRESUMEN
Three-dimensional (3D) fiber deposition (3DF), a rapid prototyping technology, was successfully directly applied to produce novel 3D porous Ti6Al4V scaffolds with fully interconnected porous networks and highly controllable porosity and pore size. A key feature of this technology is the 3D computer-controlled fiber depositing of Ti6Al4V slurry at room temperature to produce a scaffold, consisting of layers of directionally aligned Ti6Al4V fibers. In this study, the Ti6Al4V slurry was developed for the 3D fiber depositing process, and the parameters of 3D fiber depositing were optimized. The experimental results show how the parameters influence the structure of porous scaffold. The potential of this rapid prototyping 3DF system for fabricating 3D Ti6Al4V scaffolds with regular and reproducible architecture meeting the requirements of tissue engineering and orthopedic implants is demonstrated.
Asunto(s)
Aleaciones , Aluminio , Titanio , Vanadio , Células 3T3 , Aire , Animales , Adhesión Celular/fisiología , Proliferación Celular , Ratones , Microscopía Electrónica de Rastreo , Presión , ViscosidadRESUMEN
Macroporous biphasic calcium phosphate (BCP) with channel-shaped pores was produced by a novel dual-phase mixing method. The processing route includes mixing water-based BCP slurry and polymethylmethacrylate resin; shaping in a mold; and polymerization, drying, pyrolyzing, and sintering. After comparison with two other commercial macroporous BCP materials, which were produced along different routes, it was found that conventional parameters such as porosity and pore size cannot describe a macroporous structure precisely enough for the application as tissue-engineering scaffold. Instead, permeability can be seen as an intrinsic and quantitative parameter to describe the macroporous structure of various scaffolds, because it is independent of sample size and fluid used in the test. Another parameter, the permeability/porosity ratio, provides an indication of the percolative efficiency per unit porous volume of a scaffold. Structural characterizations and permeability studies of other macroporous scaffold materials were also performed, and it was found that permeability could reflect a combination of five important parameters for scaffold: (1) porosity, (2) pore size and distribution, (3) interconnectivity, (4) fenestration size and distribution, and (5) orientation of pores. Finally, the implications of relating permeability with biological performances are also discussed.
Asunto(s)
Materiales Biocompatibles , Fosfatos de Calcio , Ingeniería de Tejidos/métodosRESUMEN
In craniofacial surgery, alloplastic materials are used for correcting bony defects. Porous polymethylmethacrylate (PMMA) is a biocompatible and nondegradable bone cement. Porous PMMA is formed by the classic bone cement formulation of methylmethacrylate liquid and PMMA powder in which an aqueous biodegradable carboxymethylcellulose gel is dispersed to create pores in the cement when cured. Pores give bone the opportunity to grow in, resulting in a better fixation of the prostheses. We evaluated the long-term results (n = 14), up to 20 years, of augmentations and defect fillings in the craniofacial area, with special interest in possible side effects and bone ingrowth. The evaluation consisted of a questionnaire, a physical examination, and a computed tomography (CT) scan. There were no side effects that could be ascribed to the porous PMMA. Twelve CT scans showed bone ingrowth into the prostheses, proving the validity behind the concept of porous PMMA.
Asunto(s)
Materiales Biocompatibles/química , Sustitutos de Huesos/química , Huesos Faciales/cirugía , Polimetil Metacrilato/química , Cráneo/cirugía , Materiales Biocompatibles/efectos adversos , Cementos para Huesos/química , Sustitutos de Huesos/efectos adversos , Carboximetilcelulosa de Sodio/química , Huesos Faciales/fisiopatología , Estudios de Seguimiento , Geles , Humanos , Hipersensibilidad/etiología , Necrosis , Satisfacción del Paciente , Examen Físico , Polimetil Metacrilato/efectos adversos , Porosidad , Infecciones Relacionadas con Prótesis/microbiología , Reproducibilidad de los Resultados , Estudios Retrospectivos , Cráneo/fisiopatología , Infecciones Estafilocócicas , Propiedades de Superficie , Encuestas y Cuestionarios , Tomografía Computarizada por Rayos X , Cicatrización de Heridas/fisiologíaRESUMEN
A novel method of preparing macroporous hydroxyapatite (HA) by dual-phase mixing was developed: HA slurry and Polymethylmethacrylate (PMMA) resin were mixed together at the volume ratio of 1:1. After pyrolytic removal of the PMMA phase, HA with an open porous structure was obtained. In this way, the porosity of the ceramic was limited to 50%. Attempts to increase the porosity by adding more PMMA resin were confronted with the technical hurdle of sample collapse during the pyrolysis process. To increase the porosity and to improve pore interconnection, an extra foaming step was introduced before the polymerization of PMMA resin. Three foaming agent systems were tried, based on the reactions of citric acid and (bi)carbonate salts: sodium bicarbonate, calcium carbonate, and ammonium bicarbonate. Although all the three foaming agents were able to increase the porosity up to 70%, keeping all the pores interconnected throughout, only ammonium bicarbonate system turned out to be applicable to make HA scaffolds or implants, because both NaHCO(3) and CaCO(3) systems caused alkalic residues in the final ceramic. The porous HA samples were fully characterized by FTIR, XRD, ESEM (EDX), and optical microscopy.