RESUMEN

The aim of this work was to study the feasibility of textile sludge as a precursor to prepare catalysts for catalytic wet peroxide oxidation (CWPO) by chemical and thermal treatments. Textile sludge was characterized by physical-chemical and metal composition analyses. The chemical activation was evaluated using iron sulfate and the thermal treatment was carried out at 720 °C in a vacuum pyrolysis reactor. Two catalysts with iron contents of 1.5% and 5.6% were selected. Process parameters influence on CWPO of phenol were evaluated and a maximum removal of phenol and TOC was observed at pH 3 and 60 °C, using 3 g L-1 of the catalyst containing 5.6% of iron and 11.8 mmol L-1 of H2O2. Metal analysis indicated that the textile sludge is suitable to be employed as both iron catalyst and adsorbent. The catalysts characterization indicated a reasonable surface area with a well-developed microporosity and the presence of Hematite structures in the carbonaceous matrix. The degradation process achieved 98.2% of phenol conversion, 68.2% of mineralization and 2.11 mg L-1 of iron leaching in 150 min of reaction. The catalyst presented activity for up to 5 cycles of use, but with loss of efficiency.

RESUMEN

The discharge of inadequately treated or untreated industrial wastewaters has greatly contributed to the release of contaminants into the environment, including toxic metals. Toxic metals are persistent and bioaccumulative, being their removal from wastewaters prior to release into water bodies of great concern. Literature reports the use of brown marine macroalgae for toxic metals removal from aqueous solutions as an economic and eco-friendly technique, even when applied to diluted solutions. Minor attention has been given to the application of this technique in the treatment of real wastewaters, which present a complex composition that can compromise the biosorption performance. Therefore, the main goal of this comprehensive review is to critically outline studies that: (i) applied brown marine macroalgae as natural cation exchanger for toxic metals removal from real and complex matrices; (ii) optimised the biosorption process in a fixed-bed column, which was further scaled-up to pilot plants. An overview of toxic metals sources, chemistry and toxicity, which are relevant aspects to understand and develop treatment techniques, is initially presented. The problem of water resources pollution by toxic metals and more specifically the participation of metal finishing industries in the environmental contamination are issues also covered. The current and potential decontamination methods are presented including a discussion of their advantages and drawbacks. The literature on biosorption was reviewed in detail, considering especially the ion exchange properties of cell wall constituents, such as alginate and fucoidan, and their role in metal sequestration. Besides that, a detailed description of biosorption process design, especially in continuous mode, and the application of mechanistic models is addressed.

Asunto(s)

RESUMEN

The aim of this work was to remove the dyes Reactive Blue 221 (RB 221) and Reactive Blue 198 (RB 198) of synthetic effluent using the immobilized enzyme horseradish peroxidase (HRP) in Ca-alginate beads. Experimental parameters affecting the dye removal process such as the effect of pH, temperature, hydrogen peroxide concentration, mass capsules, and reuse were evaluated, and a numerical model of mass transfer was developed. A maximum removal of 93 and 75%, respectively, for the dyes RB 221 and RB 198, at pH 5.5 and temperature of 30 °C, concentration of hydrogen peroxide of 43.75 µM for dye RB 221 and 37.5 µM for the dye of RB 198 was obtained. A removal reaction of 180 min for RB 221 and 240 min for RB 198 was observed. Three reuse cycles of use of immobilized enzyme were achieved for both dyes. The numerical model proposed led to a good fit compared to experimental data. The HRP enzyme immobilized in Ca-alginate capsules showed a great potential for biotechnological applications, especially for the removal of reactive dyes.

Asunto(s)

RESUMEN

Sludge from the textile industry was used as a low-cost adsorbent to remove the dye Reactive Red 2 from an aqueous solution. Adsorbents were prepared through the thermal and chemical treatment of sludge originating from physical-chemical (PC) and biological (BIO) effluent treatment processes. The adsorbent characterization was carried out through physical-chemical analysis, X-ray fluorescence (XRF) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, pHPZC determination, Boehm titration method, Brunauer-Emmett-Teller (BET) surface area analysis and scanning electron microscopy (SEM). Batch kinetic experiments and adsorption isotherm modeling were conducted under different pH and temperature conditions. The results for the kinetic studies indicate that the adsorption processes associated with these systems can be described by a pseudo-second-order model and for the equilibrium data the Langmuir model provided the best fit. The adsorption was strongly dependent on the pH but not on the temperature within the ranges studied. The maxima adsorption capacities were 159.3 mg g(-1) for the BIO adsorbent and 213.9 mg g(-1) for PC adsorbent at pH of 2 and 25 °C.

Asunto(s)