RESUMEN

PURPOSE: To evaluate the feasibility of day surgery anterior cruciate ligament reconstruction (ACLR) in children. Our hypothesis was that proper patient selection, adequate information and a streamlined clinical pathway would allow for a safe and satisfactory procedure. METHODS: A total of 20 patients, seven girls and 13 boys, who underwent outpatient ACLR at mean age of 14 years (8 to 16) were included in this single institution prospective case series. Surgery took place under simple general anesthesia while analgesia protocol combined local anesthesia, oral analgesics for the postoperative period and compressive cryotherapy. The main failure criterion was the inability to return home the day of surgery or the need for rehospitalization during the first week after discharge. Secondary evaluation parameters were the rate of postoperative complications, postoperative pain, quality of life (QOL) and patients' satisfaction outcome questionnaire (PSOQ) at postoperative day 1, 7 and 31. RESULTS: Of the 20 patients included, only one failed the ambulatory mode. The mean PSOQ score was, respectively for children and parents, 91.4% and 90.7% at day 7 and 94.6% and 95.7% at one month. Postoperative QOL at day 7 was very satisfying for all patients. Two minor early complications were reported. Both of the late complications, which included one partial wound dehiscence and one persistent knee swelling, resolved spontaneously. CONCLUSION: This study indicates that, in a targeted and well-informed population, day surgery for children ACLR yields high level of patient and family satisfaction in a safely manner. LEVEL OF EVIDENCE: IV, prospective case series.

RESUMEN

BACKGROUND: Management of moderately displaced slipped capital femoral epiphysis (SCFE) is debated, mostly because of the risks related to open reduction on one hand, and subsequent evolution toward femoroacetabular impingement (FAI) on the other. METHOD: All SCFE cases treated with in situ fixation (ISF) and a minimum of ten years of follow-up beyond skeletal maturity were analysed in a retrospective multicentre study. Coxometry parameters were measured. Long-term results of ISF were meanwhile analysed at our Institution. RESULTS: A total of 222 patients were included. Patient reported outcome measurements were related to the severity of the initial slip. It suggested a 35.5° threshold for slip angle beyond which FAI was more frequent. Only slight remodelling at the head-neck junction is to be expected. CONCLUSION: Based on these findings, it seems reasonable to perform ISF only in SCFE with a slip angle below 35°.

RESUMEN

BACKGROUND: In situ pinning of slipped capital femoral epiphysis (SCFE) results in various degrees of deformity of the femoral head-neck junction. Repetitive trauma from cam-type femoroacetabular impingement (FAI) can lead to labral tears and injury to the articular cartilage causing loss of function. Arthroscopic osteoplasty is an alternative to open procedure and to Southwick/Imhäuser-type osteotomies in symptomatic selected cases. SURGICAL TECHNIQUE: The amount of bone to be resected has to be carefully planned pre-operatively. Only gentle traction is applied on a well-padded perineal support. A spherical burr is used to gradually resect the prominence. Intra-operative fluoroscopy is very useful when checking adequate reshaping of the head-neck junction is obtained. RESULTS: Arthroscopy often reveals acetabular cartilage lesions, labrum hyperhemia and fraying which rarely require repair. Arthroscopic osteoplasty provides satisfactory pain relief and, to a lesser extent, restores hip internal rotation. CONCLUSION: Arthroscopic osteoplasty is more technically and time-demanding in post SCFE than idiopathic FAI. It requires strong arthroscopic skills and experience in hip arthroscopy. It stands as a reasonable alternative to open procedure or flexion osteotomies in symptomatic FAI post mild to moderate SCFE. It provides pain relief and to a lesser extent restores internal rotation of the hip.

RESUMEN

PURPOSE: Recent literature has reported that the ]progression risk of Lenke 5 adolescent idiopathic scoliosis (AIS) during adulthood had been underestimated. Surgery is, therefore, proposed more to young patients with progressive curves. However, choice of the approach and fusion levels remains controversial. The aim of this study was to analyze the influence of the length of posterior fusion on clinical and radiological outcomes in Lenke 5 AIS. METHODS: All Lenke 5 AIS operated between 2008 and 2012 were included with a minimum 2-year follow-up. Patients were divided into two groups according to the length of fusion. In the first group (selective), the upper instrumented level (UIV) was the upper end vertebra of the main structural curve and distally the fusion was extended to the stable and neutral vertebra, according to Lenke's classification. In the second group (hyperselective), shorter fusions were performed and the number of levels fused depended on the location of the apex of the curve (at maximum, 2 levels above and below, according to Hall's criteria). Apart from the fusion level selection, the surgical procedure was similar in both groups. Radiological outcomes and SRS-22 scores were reported. RESULTS: 78 patients were included (35 selective and 43 hyperselective). The number of levels fused was significantly higher in the first group (7.8 ± 3 vs 4.3 ± 0.6). None of the patients was fused to L4 in selective group. No correlation was found between length of fusion and complication rate. Eight patients had adding-on phenomenon among which 6 (75%) had initially undergone hyperselective fusions and had significantly higher postoperative lower instrumented vertebra (LIV) tilt. In the adding-on group, LIV was located above the last touching vertebra (LTV) in 62.5% of the cases and above the stable vertebra (SV) in 87.5%. Patients in the selective group reported a significantly lower score in the SRS function domain. CONCLUSION: Coronal alignment was restored in both groups. Hyperselective posterior fusions can be considered in Lenke 5 AIS, preserving one or two mobile segments, with similar clinical and radiological outcomes. However, selection of the LIV according to SV and LTV need to be accurately analyzed in order to avoid adding-on during follow-up.

Asunto(s)

RESUMEN

PURPOSE: Cobalt chromium (CoCr) rods have recently gained popularity in adolescent idiopathic scoliosis (AIS) surgical treatment, replacing titanium (Ti) rods, with promising frontal correction rates in all-screw constructs. Posteromedial translation has been shown to emphasize thoracic sagittal correction, but the influence of rod material in this correction technique has never been investigated. The aim of this study was to compare the postoperative correction between Ti and CoCr rods for the treatment of thoracic AIS using posteromedial translation technique. METHODS: 70 patients operated for thoracic (Lenke 1 or 2) AIS, in 2 institutions, between 2010 and 2013, were included. All patients underwent posterior fusion with hybrid constructs using posteromedial translation technique. The only difference between groups in the surgical procedure was the rod material (Ti or CoCr rods). Radiological measurements were compared preoperatively, postoperatively and at last follow-up (minimum 2 years). RESULTS: Preoperatively, groups were similar in terms of coronal and sagittal parameters. Postoperatively, no significant difference was observed between Ti and CoCr regarding frontal corrections, even when the preoperative flexibility of the curves was taken into account (p = 0.13). CoCr rods allowed greater restoration of T4T12 thoracic kyphosis, which remained stable over time (p = 0.01). Most common postoperative complication was proximal junctional kyphosis (n = 4). However, no significant difference was found between groups regarding postoperative complications rate. CONCLUSION: CoCr and Ti rods both provide significant and stable frontal correction in AIS treated with posteromedial translation technique using hybrid constructs. However, CoCr might be considered to emphasize sagittal correction in hypokyphotic patients.

Asunto(s)

Asunto(s)

RESUMEN

The aim of the study was to implement a methodology to quantify in vivo and from magnetic resonance imaging (MRI) the 3D geometrical properties of intervertebral discs (IVDs) in early idiopathic scoliosis with small curves. MRI data were posttreated using a custom-made image processing software to semiautomatically determine the location of disc centres, the location of the nucleus pulposus (NP) and the ratio between the NP volume and the disc volume. MRI was performed in a clinical protocol involving 14 patients having an early idiopathic scoliosis. First, the 3D reconstruction errors were quantified using a reproducibility test (intraoperator and interoperator) in one IVD (L5-S1). The maximal errors in location were 0.79 mm in the frontal plane, 1.84 mm in the sagittal plane and 0.76 mm in the vertical plane. The maximal error in relative volume was 42%. Second, the nucleus migration and relative volume were quantified in discs T5-T6 to L5-S1. No significant relative volume variation was detected. Concerning the disc migration, no significant differences were found in the sagittal and axial planes. In the frontal plane, significant differences were observed at the apex of the scoliotic curvature when the Cobb angle was > or =20 degrees . This innovative study in early scoliosis showed reproducible preliminary results, and its application to improve diagnosis and follow-up will be established in an enlarged patient database.

Asunto(s)

RESUMEN

Correlations between intervertebral disc degeneration and bone mass were investigated previously, but never on scoliotic patients. Using MRI measurements of intervertebral discs behavior and vertebral bone tomodensitometry, correlations between nucleus zone displacement within intervertebral discs and mechanical center migration within vertebral bodies were investigated in vivo on scoliotic patients. The protocol, performed on eleven scoliotic girls, was composed of a CT scan acquisition of apical and adjacent vertebrae followed by a MRI acquisition of the thoracolumbar spine. The displacement between the vertebral body centroid and inertia center was computed from the CT images and called the mechanical migration. The displacement between nucleus zones and vertebral body centroids was quantified from MRI and called the nucleus zone migration. For apical vertebrae, a significant correlation was found in the coronal plane (r = 0.766, p < 0.01), but not in the sagittal plane (r = -0.349, p > 0.05). For adjacent vertebrae, significant correlations were found in both coronal (r = -0.633, p < 0.05) and sagittal (r = -0.797, p < 0.01) planes. The nucleus zone migration occurred in the convexity of the curvature whereas the mechanical migration occurred in the concavity.Known secondary mechanical phenomenon of scoliosis was quantified using new parameters describing intervertebral discs and vertebral bodies. Further investigations should be performed to explain the mechanical evolution of scoliosis and to use these parameters in predictive criteria of scoliosis.

Asunto(s)

RESUMEN

The authors report a case of meniscus at the elbow joint in a 15-month-old infant causing a limitation of elbow extension. Histological examination demonstrated that this tissue was not a synovial fold or a chondroid metaplasia of the synovial fold. As a meniscus does not appear at any stage of the embryological evolution of the elbow joint, it has been concluded that the presence of the meniscus can be considered as an abnormal condition.

Asunto(s)

RESUMEN

MRI has been clinically only used for investigation of intervertebral disc disorders. In this study, MR images were used and a new 3D modelling of the intervertebral discs was proposed. MRI examination had been performed on fourteen girls presenting an idiopathic scoliosis and wearing a first CTM brace. Using an in-house image processing software and the pre-post processing software Patran, geometrical models were obtained with and without brace for each patient. These models included the outline of the intervertebral high intensity zone, composed of the nucleus and a part of the annulus. The shift forward between disc high intensity zone centres and body centres was found to be varying from 0 to 8mm. The sagittal and coronal shifts forward appeared in the curvature convexity and were maximum at the curvature apex. The intervertebral disc wedging was found to be varying from -10 degrees to +10 degrees. On these fourteen analysed patients, the CTM brace decreased the coronal shift forward between disc high intensity zone centres and body centres, and increased the sagittal intervertebral wedging. The intervertebral disc informations obtained represented new data in the scoliotic deformation description. But this method was not adapted for a clinical use. The qualitative and quantitative data obtained will help the orthopaedist in the brace design and also the clinician in the scoliosis comprehension.

Asunto(s)

Asunto(s)

RESUMEN

An in vivo method based on CT images and finite element meshing had been developed to quantify and visualize the bone density distribution of scoliotic vertebrae. CT examination (axial acquisition of the apical, superior and inferior adjacent vertebral bodies) had been performed on seven girls presenting an idiopathic scoliosis. Using an in-house image processing software and the pre-post processor Patran, a surfacic finite element mesh of each body slice was proposed allowing an automatic mapping of the cancellous bone slices and a volumic mesh for the bone density distribution visualization. In the coronal plane, compared to the body geometrical centre, the body mechanical centre was shifted forward in the concavity of the curvature for six patients and in the convexity for one patient. For each patient, this shift forward was made in a same way for the three vertebrae. In the sagittal plane, the body mechanical inertia centre was shifted forward in the posterior side for 12 vertebrae, in the anterior side for 3 vertebrae and was not shifted forward for 6 vertebrae. This shift forward was made in the anterior side for the inferior adjacent vertebra. The shift forward by slice was made in a same way for each slice, excepted at the end plates. Besides, one can observe that the scoliotic deformation evolution seemed to modify the mechanical property distribution. The results may also suggest predictive criteria of evolution of the scoliotic deformities.

Asunto(s)