RESUMEN
This study aimed to show that the physicochemical proprieties obtained by Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and scanning electronic microscopy (SEM) can be useful tools for evaluating the quality of active pharmaceutical ingredients (APIs) and pharmaceutical products. In addition, a simple, sensitive, and efficient method employing HPLC-DAD was developed for simultaneous determination of lidocaine (LID), ciprofloxacin (CFX) and enrofloxacin (EFX) in raw materials and in veterinary pharmaceutical formulations. Compounds were separated using a Gemini C18 (250â¯mm × 4.6â¯mm, 5⯵m) Phenomenex® column, at a temperature of 25⯰C, with a mobile phase containing 10â¯mM of phosphoric acid (pH 3.29): acetonitrile (85.7:14.3, v/v) and a flow rate of 1.5â¯mL/min. Physicochemical characterization by TG, FTIR, and SEM of raw materials of LID, CFX, and EFX provided information useful for the evaluation, differentiation, and qualification of raw materials. Finally, the HPLC method was proved to be useful for evaluation of raw material and finished products, besides satisfying the need for an analytical method that allows simultaneous determination of EFX, CFX, and LID, which can also be extended to other matrices and applications.
RESUMEN
In this work, an efficient pipette tip based on molecularly imprinted polymers solid-phase extraction (PT-MIP-SPE) method was developed for carvedilol (CAR) analysis. This compound is available in clinical practice as a racemic mixture, in which (-)-(S)-CAR is a ß- and α1-adrenergic antagonist, while (+)-(R)-CAR only acts as an α1-adrenergic antagonist. Enantioseparation of CAR presented satisfactory retention times (5.85 and 14.84min), acceptable theoretical plates (N=2048 and 2018) and good resolution (Rs=9.27). The separation was performed using a Chiralpak® IA column (100mm×4.6mm, 3µm), a mixture of methanol:ethanol:water (64:15:21, v/v/v) plus 0.3% diethylamine as mobile phase, temperature of 35°C and flow rate of 1.5mLmin-1. After density functional theory calculations based on prepolymerization complexes, the best protocol for the MIP synthesis was chosen. Then, some parameters that affect the PT-MIP-SPE technique were investigated. After optimization, the best conditions were 300µL of water as washing solvent, 500µL of acetonitrile:acetic acid (7:3, v/v) as eluting solvent, 20mg of MIP, 500µL of urine sample (pH 12.5) and no addition of NaCl. Recoveries±relative standard deviation (RSD%) for (+)-(R)-CAR and (-)-(S)-CAR were 101.9±4.8% and 104.6±2.1%, respectively. The method was linear over the concentration range from 20 to 1280ngmL-1 for each enantiomer, with correlation coefficients larger than 0.99 for both enantiomers. The method was applied successfully in a preliminary study of urinary excretion after administration of CAR racemate to a healthy volunteer.
Asunto(s)
Carbazoles/química , Carbazoles/orina , Impresión Molecular/métodos , Propanolaminas/química , Propanolaminas/orina , Extracción en Fase Sólida/métodos , Carvedilol , Cromatografía Líquida de Alta Presión , Humanos , Límite de Detección , Modelos Lineales , Reproducibilidad de los Resultados , EstereoisomerismoRESUMEN
A two-phase liquid phase microextraction using a hollow fiber combined with injection port derivatization and gas chromatographic analysis was developed for extracting and detecting fluoxetine (FLU) and norfluoxetine (NOR) in human plasma. Simultaneous extraction in a multiple tube shaker was used and, afterward, the organic phase was simply injected together with the derivatizing agent n-methyl-bis(trifluoroacetamide) (MBTFA). Factors influencing injection port derivatization, and several extraction parameters were optimized. Under optimal conditions the proposed method provided linearity between 10 and 500ngmL(-1) (R(2)=0.9973) for FLU, and between 15 and 500ngmL(-1) (R(2)=0.9972) for NOR. Intra-assay precision (RSD) between 4.8 and 13.1% and inter-assay between 5.4 and 14.2% were obtained, with detection and quantification limits of 3 and 10ngmL(-1), and of 5 and 15ngmL(-1) for FLU and NOR, respectively, using selected ion monitoring mode. Selectivity, short term stability and extraction efficiency were also evaluated. This method was simple, cheap, and environmentally friendly, yielding significant reduction of solvents and derivatizing agent consumption. The method was successfully applied to the analysis of samples from 5 patients under fluoxetine treatment.