RESUMEN
Although several methods for the analysis of nitrogen compounds in diesel fuel have been described in the literature, the demand for rapid, sensitive, and robust analyses has increased in recent years. In this study, a comprehensive two-dimensional gas chromatographic method was developed for the identification and quantification of nitrogen compounds in diesel fuel samples. The quantification was performed using the standard addition method and the analysis was conducted using comprehensive two-dimensional gas chromatography coupled with fast quadrupole mass spectrometry. This study is the first to report quantification of nitrogen compounds in diesel fuel samples using the standard addition method without fractionation. This type of analysis was previously performed using many laborious separation steps, which can lead to errors and losses. The proposed method shows good linearity for target nitrogen compounds evaluated (m-toluidine, 4-ethylaniline, indole, 7-methylindole, 7-ethylindole, carbazole, isoquinoline, 4-methylquinoline, benzo[h]quinolone, and acridine) over a range from 0.05 to 2.0 mg/L, and limits of detection and quantification of <0.06 and 0.16 mg/L, respectively, for all nitrogen compounds studied.
RESUMEN
In this paper it is studied the most polar fractions of bio-oil produced by fast pyrolysis of Lignocel BK40-90 (sawdust from forest timber). The biomass was submitted to the pyrolysis in an existing FCC pilot plant that was adapted for this procedure. The equipment consists of a fluidized bed reactor with nitrogen injection. The unit operates with continuous biomass feeding and continuous solids circulation. The produced bio-oil was submitted to an aqueous alkaline extraction, isolating the acidic compounds that were analyzed by one-dimensional gas chromatography and comprehensive two-dimensional gas chromatography with quadrupole mass spectrometry detection (qMS). One hundred and thirty compounds (mainly phenols and ketones) were tentatively identified in the extract, some of them by the use of retention indexes. The main differences between chromatographic techniques were the substantial increasing in the peak capacity of GC×GC and the resolution of some co-elutions that occurred in GC/qMS. It is also possible to conclude that this extract is rich in important raw materials for the chemical industry and can be used for this end.