RESUMEN

There is a growing interest in developing new strategies to completely or partially replace cocoa butter in food and cosmetic products due to its cost and health effects. One of these alternatives is to develop stable emulsions of cocoa butter in water. However, incorporating cocoa butter is challenging as it solidifies and forms crystals, destabilizing the emulsion through arrested coalescence. Prevention against this destabilization mechanism is significantly lower than against coalescence. In this research, the rheological properties of nanocellulose from cocoa shell, a by-product of the chocolate industry, were controlled through isolation treatments to produce nanocellulose with a higher degree of polymerization (DP) and a stronger three-dimensional network. This nanocellulose was used at concentrations of 0.7 and 1.0 wt %, to develop cocoa butter in-water Pickering emulsion using a high shear mixing technique. The emulsions remained stable for more than 15 days. Nanocellulose was characterized using attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), hot water and organic extractives, atomic force microscopy (AFM), degree of polymerization (DP), and rheological analysis. Subsequently, the emulsions were characterized on days 1 and 15 after their preparation through photographs to assess their physical stability. Fluorescent and electronic microscopy, as well as rheological analysis, were used to understand the physical properties of emulsions.

RESUMEN

Unsaturated polyester resin (UPR) is one of the first commercialized polymer matrices for composites reinforced with glass fibers, but has remained popular to this day. To reduce their environmental impact, natural fibers have been used as reinforcements. Researchers all over the world are still interested in these composites, and numerous papers have been published in the last four decades. Using bibliometric analysis, this work provides compiled, structured, and relevant information about the evolution and current state of these materials. This first study on UPR biocomposites based on bibliometric analysis examined 531 published papers identified in the Scopus database from 1982 to July 2022. An analysis of the most active states, leading institutions, and leading authors is followed by the identification of key areas such as the most common natural fibers used as reinforcements, fiber treatments, and composite design parameters such as processing techniques; recently, composite testing; and technological applications. The findings emphasize the importance of staying active in this global field and provide information on novel promising topics for future research.

RESUMEN

Turmeric (Curcuma longa L.) plants are native to Southeast Asia and are part of the Zingiberaceae family. Global consumption and production of this plant are expanding. In countries such as Colombia, turmeric is a promising cultivar. Curcuminoids derived from its rhizomes are used in food, pharmaceuticals, and natural cosmetics. Curcuminoids constitute approximately 3 wt% of the rhizome. Many residues rich in cellulose and starch can thus be recovered. This study characterizes a novel starch isolated from Colombian turmeric cultivars. The morphological parameters of the starch were determined using microscopic techniques such as scanning electron microscopy (SEM). Proximate analysis and infrared spectroscopy (ATR-FTIR) were used to analyze the chemical composition, while physical analyses included thermal characterization, swelling power testing, solubility, water retention capacity, and colorimetry evaluation. The new starch granules were ellipsoidal in shape and ranged in diameter from 19.91 to 38.09. A trace amount of remaining curcumin was identified through chemical and physical characterization. The swelling power was 3.52 ± 0.30, and its water retention capacity was 3.44 ± 0.30. Based on these findings, turmeric can be useful in both food and non-food applications. Because starch was extracted from other Zingiberaceae plants, this study also includes a brief review of the related literature.

RESUMEN

Color is an important characteristic of food products. This characteristic is related to consumer acceptability. To use the entire rhizome of Curcuma longa (CL) as a food colorant, a novel gel alike stable suspension (CLS) was previously developed using cellulose nanofibers (CNFs). Therefore, the present study was conducted to evaluate the CLS as a color additive on a stirred yogurt. Three concentrations of CLS were studied (0.1, 0.125, and 0.15 wt. %) and compared to yogurt without CLS. The obtained yogurts were characterized through the determination of pH, titratable acidity, syneresis, color and curcumin content after 1, 7, 14, and 21 days of storage. Additionally, rheological and sensory measurements were performed on the samples after one day of storage. Results show that the addition of CLS does not affect the pH and titratable acidity of the samples, but all the yogurts showed an increase in their syneresis during the storage time, showing a breakdown of the gel structure. Furthermore, the CLS suspension has the ability to impart a yellow color to yogurts, a characteristic that was stable during storage. Finally, the addition of 1 wt. % or 1.25 wt. % of CLS allows the development of a yogurt with adequate sensory perception.

Asunto(s)

RESUMEN

Emulsion stabilization is a broad and relevant field with applications in oil, polymer and food industries. In recent years, the use of solid particles to stabilize emulsions or Pickering emulsions have been studied for their kinetic and physical properties. Nanomaterials derived from natural sources are an interesting alternative for this application. Cellulose nanofibrils (CNFs) have been widely explored as a Pickering emulsifier with potential food applications, however, in some cases the presence of surfactants is unavoidable, and the literature is devoid of an evaluation of the effect of a non-ionic food-grade surfactant, such as polysorbate 80, in the stabilization of a vegetable oil by CNFs. To better assess the possible interactions between CNFs and this surfactant emulsions containing coconut oil, an emerging and broadly used oil, were processed with and without polysorbate 80 and evaluated in their qualitative stability, morphological and physical properties. Fluorescence microscopy, dynamic light scattering and rheology were used for this assessment. Results indicate in absence of the surfactant, emulsion stability increased at higher CNFs content, creaming was observed at 0.15 and 0.3 wt.% of CNFs, while it was not evidenced when 0.7 wt.% was used. After the addition of surfactant, the droplets are covered by the surfactant, resulting in particles with a smaller diameter, entrapped in the cellulosic structure. Rheology indicates a lower network stiffness after adding polysorbate 80.

RESUMEN

Scales of Prochilodus magdalenae, a Colombian endemic fish species, were used to obtain chitosan for application as an antibacterial agent integrated into starch-based films. Analysis of its composition during the demineralization and deproteinization process indicated that minerals and protein were both removed successfully. At this point, mild conditions for the deacetylation process were employed, namely, 2, 4, and 6 wt.% NaOH at room temperature for 16 h. Chitosan processed under 2 wt.% NaOH had low molecular weight, with the lowest value of 107.18 ± 24.99 kDa, which was closely related to its antibacterial activity. Finally, this chitosan was integrated into a banana starch-based film, and its antibacterial activity was assayed in Escherichia coli and Staphylococcus aureus cultures, with positive results in the former culture, especially due to the low-molecular-weight characteristic of chitosan.

RESUMEN

Nanoparticles (NPs) decorated with coating agents (polymers, gels, proteins, etc.) form Nanoparticle Drug Delivery Systems (DDNS), which are of high interest in nanotechnology and biomaterials science. There have been increasing reports of experimental data sets of biological activity, toxicity, and delivery properties of DDNS. However, these data sets are still dispersed and not as large as the datasets of DDNS components (NP and drugs). This has prompted researchers to train Machine Learning (ML) algorithms that are able to design new DDNS based on the properties of their components. However, most ML models reported up to date predictions of the specific activities of NP or drugs over a determined target or cell line. In this paper, we combine Perturbation Theory and Machine Learning (PTML algorithm) to train a model that is able to predict the best components (NP, coating agent, and drug) for DDNS design. In so doing, we downloaded a dataset of >30 000 preclinical assays of drugs from ChEMBL. We also downloaded an NP data set formed by preclinical assays of coated Metal Oxide Nanoparticles (MONPs) from public sources. Both the drugs and NP datasets of preclinical assays cover multiple conditions of assays that can be listed as two arrays, namely, cjdrug and cjNP. The cjdrug array includes >504 biological activity parameters (c0drug), >340 target proteins (c1drug), >650 types of cells (c2drug), >120 assay organisms (c3drug), and >60 assay strains (c4drug). On the other hand, the cjNP array includes 3 biological activity parameters (c0NP), 40 types of proteins (c1NP), 10 shapes of nanoparticles (c2NP), 6 assay media (c3NP), and 12 coating agents (c4NP). After downloading, we pre-processed both the data sets by separate calculation PT operators that are able to account for changes (perturbations) in the drug, coating agents, and NP chemical structure and/or physicochemical properties as well as for the assay conditions. Next, we carry out an information fusion process to form a final dataset of above 500 000 DDNS (drug + MONP pairs). We also trained other linear and non-linear PTML models using R studio scripts for comparative purposes. To the best of our knowledge, this is the first multi-label PTML model that is useful for the selection of drugs, coating agents, and metal or metal-oxide nanoparticles to be assembled in order to design new DDNS with optimal activity/toxicity profiles.

Asunto(s)

RESUMEN

In this study, the effect of bioreactor size was evaluated with respect to the production and characteristics of the nanocellulose membranes produced by two different bioreactors: one with an 1800 cm2 cross-sectional area (BC-B44) and a lab-scale bioreactor with a 41 cm2 cross-sectional area (BC-B1). The culture conditions were kept the same, and the substrate consisted of overripe bananas, which are inexpensive because they are unsuitable for human consumption. The X-ray diffraction pattern showed that the two samples had similar crystalline structures, but changes were observed at the morphological level in the nanofibers that make up the BNC membranes. These changes generated, in turn, variations in the mechanical and thermal properties of the samples. This result represents a novel scale-up effect related to the static mode fermentation of BNC.

Asunto(s)

RESUMEN

Despite the efforts focused on manufacturing biological engineering scaffolds for tissue engineering and regenerative medicine, a biomaterial that meets the necessary characteristics for these applications has not been developed to date. Bacterial nanocellulose (BNC) is an outstanding biomaterial for tissue engineering and regenerative medicine; however, BNC's applications have been focused on two-dimensional (2D) medical devices, such as wound dressings. Given the need for three-dimensional (3D) porous biomaterials, this work evaluates two methods to generate (3D) BNC scaffolds. The structural characteristics and physicochemical, mechanical, and cell behaviour properties were evaluated. Likewise, the effects of the pore size and surface area in the mechanical performance of BNC biomaterials and their cell response in a fibroblast cell line are discussed for the first time. In this study, a new method is proposed for the development of 3D BNC scaffolds using paraffin wax. This new method is less time-consuming, more robust in removing the paraffin and less aggressive toward the BNC microstructure. Moreover, the biomaterial had regular porosity with good mechanical behaviour; the cells can adhere and increase in number without overcrowding. Regarding the pore size and surface area, highly interconnected porosities (measuring approximately 60 µm) and high surface area are advantageous for the biomaterial's mechanical properties and cell behaviour. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 348-359, 2019.

Asunto(s)

RESUMEN

Bacterial cellulose (BC) is a polymer obtained by fermentation with microorganism of different genera. Recently, new producer species have been discovered, which require identification of the most important variables affecting cellulose production. In this work, the influence of different carbon sources in BC production by a novel low pH-resistant strain Komagataeibacter medellinensis was established. The Hestrin-Schramm culture medium was used as a reference and was compared to other media comprising glucose, fructose, and sucrose, used as carbon sources at three concentrations (1, 2, and 3% w/v). The BC yield and dynamics of carbon consumption were determined at given fermentation times during cellulose production. While the carbon source did not influence the BC structural characteristics, different production levels were determined: glucose > sucrose > fructose. These results highlight considerations to improve BC industrial production and to establish the BC property space for applications in different fields.

RESUMEN

Rheological and physical properties of edible coating formulations containing gelatin, cellulose nanofibers (CNFs), and glycerol are characterized. Measured properties are analyzed in order to optimize edible coating thickness. Results show that coating formulations density increases linearly with gelatin concentration in presence of CNFs. Surface tension decreases with either gelatin or CNF concentration increases. Power law model well described the rheological behavior of edible coating formulations since determination coefficient was high (R(2 )> 0.98) and standard error was low (SE < 0.0052). Formulations showed pseudoplastic (shear-thinning) flow behavior and no time-dependent features were observed. The flow behavior index was not significantly affected by any factor. Consistency coefficient increases with gelatin concentrations but it decreases with glycerol concentrations.

Asunto(s)

RESUMEN

The phylogenetic position of a cellulose-producing acetic acid bacterium, strain ID13488, isolated from commercially available Colombian homemade fruit vinegar, was investigated. Analyses using nearly complete 16S rRNA gene sequences, nearly complete 16S-23S rRNA gene internal transcribed spacer (ITS) sequences, as well as concatenated partial sequences of the housekeeping genes dnaK, groEL and rpoB, allocated the micro-organism to the genus Gluconacetobacter, and more precisely to the Gluconacetobacter xylinus group. Moreover, the data suggested that the micro-organism belongs to a novel species in this genus, together with LMG 1693(T), a non-cellulose-producing strain isolated from vinegar by Kondo and previously classified as a strain of Gluconacetobacter xylinus. DNA-DNA hybridizations confirmed this finding, revealing a DNA-DNA relatedness value of 81 % between strains ID13488 and LMG 1693(T), and values <70 % between strain LMG 1693(T) and the type strains of the closest phylogenetic neighbours. Additionally, the classification of strains ID13488 and LMG 1693(T) into a single novel species was supported by amplified fragment length polymorphism (AFLP) and (GTG)5-PCR DNA fingerprinting data, as well as by phenotypic data. Strains ID13488 and LMG 1693(T) could be differentiated from closely related species of the genus Gluconacetobacter by their ability to produce 2- and 5-keto-d-gluconic acid from d-glucose, their ability to produce acid from sucrose, but not from 1-propanol, and their ability to grow on 3 % ethanol in the absence of acetic acid and on ethanol, d-ribose, d-xylose, sucrose, sorbitol, d-mannitol and d-gluconate as carbon sources. The DNA G+C content of strains ID13488 and LMG 1693(T) was 58.0 and 60.7 mol%, respectively. The major ubiquinone of LMG 1693(T) was Q-10. Taken together these data indicate that strains ID13488 and LMG 1693(T) represent a novel species of the genus Gluconacetobacter for which the name Gluconacetobacter medellinensis sp. nov. is proposed. The type strain is LMG 1693(T) ( = NBRC 3288(T) = Kondo 51(T)).

Asunto(s)

RESUMEN

A bacterial strain isolated from the fermentation of Colombian homemade vinegar, Gluconacetobacter medellensis, was investigated as a new source of bacterial cellulose (BC). The BC produced from substrate media consisting of various carbon sources at different pH and incubation times was quantified. Hestrin-Schramm (HS) medium modified with glucose led to the highest BC yields followed by sucrose and fructose. Interestingly, the microorganisms are highly tolerant to low pH: an optimum yield of 4.5 g/L was achieved at pH 3.5, which is generally too low for other bacterial species to function. The cellulose microfibrils produced by the new strain were characterized by scanning and transmission electron microscopy, infrared spectroscopy X-ray diffraction and elemental analysis. The morphological, structural and chemical characteristics of the cellulose produced are similar to those expected for BC.

Asunto(s)

RESUMEN

Comestible fruit production from Musaceas plants is an important economical activity in developing countries like Colombia. However, it generates a large amount of agro-industrial residues. Some of them are a potential resource of natural fibres, which can be used as reinforcement for composite materials. In this work, a series of commercial plantain (Musa AAB, cv "Dominico Harton") fibre bundles extracted from pseudostem, leaf sheath and rachis agricultural wastes were analyzed. Mechanical decortication and biological retting processes were used during fiber extraction. No significant differences in composition of vascular bundles were observed for both extraction processes. Gross morphological characteristics and mechanical behavior have been evaluated. Conducting tissues with spiral-like arrangement are observed attached to fibre bundles. This fact suggests a big amount of these tissues in commercial plantain plants. Both used extraction methods are not enough to remove them. Pseudostem fibre bundles have higher specific strength and modulus and lower strain at break than leaf sheath and rachis fibre bundles, having values comparable to other lignocellulosic fibres bundles.

Asunto(s)

RESUMEN

Extraction processes of natural fibers can be performed by different procedures that include mechanical, chemical and biological methods. Each method presents different advantages or drawbacks according to the amount of fiber produced or the quality and properties of fiber bundles obtained. In this study, biological natural retting was satisfactorily used for obtaining banana fibers from plant bunches. However, the most important contribution of this work refers to the description of the hierarchical microstructural ordering present in banana fiber bundles in both bundle surface and inner region. The chemical composition of banana fiber bundles has been evaluated by FTIR spectroscopy. Through exposure time, the fiber bundle configuration presents small variations in composition. The main changes are related to hemicellulose and pectins as they conform the outer walls of the bundle. Hierarchical helicoidal ordering in the bundle surface as well as orientation on the longitudinal axis of the bundle were observed by optical microscopy (OM) and scanning electron microscopy (SEM) for 3-4 microm surface fibers and 10-15 microm inner elementary fibers, respectively. With increasing exposure time, fiber bundle walls lose integrity, as reflected in their mechanical behavior.

Asunto(s)