Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros











Base de datos
Intervalo de año de publicación
1.
Environ Technol ; : 1-9, 2023 Aug 30.
Artículo en Inglés | MEDLINE | ID: mdl-37610014

RESUMEN

Proper disinfection treatment is the basic guarantee for safe utilisation of sewage. However, the commonly used disinfection methods are not suitable for nutrients containing reclaimed water. In this work, the microwave disinfection method assisted by a microwave-absorbing material in recycled water samples was investigated. Magnetic corn stalk biochar (MCSB), the microwave absorbing material, was prepared by high temperature carbonisation of corn stalk particles impregnated with ferrous sulfate. Escherichia coli and fecal coliforms were selected as target microorganisms to investigate the disinfection efficiency of MCSB assisted microwave radiation (MW/MCSB). The addition of microwave absorbing materials significantly improves the disinfection effect of water samples. Compared with the microwave radiation (MW) without MCSB, the bactericidal rate by using 107 CFU/L E. coli suspension increased from 63.5% to 100% at 480 W for 30 s after adding 4 g/L MCSB. Besides, the effects of MCSB dosage, microwave power, microwave radiation time, and initial bacterial concentration on disinfection efficiency were explored. Moreover, the bactericidal efficiency for actual sewage samples was also demonstrated by treating the effluent from septic tank sewage. The residual fecal coliforms in treated water samples met China's farmland irrigation water standard (GB 5084-2021). The result indicates that the proposed method of microwave disinfection strengthened by MCSB has a promising application prospect for reclaimed water disinfection.

2.
Sensors (Basel) ; 22(23)2022 Dec 05.
Artículo en Inglés | MEDLINE | ID: mdl-36502216

RESUMEN

Long-range E-band communication with fiber-equivalent speed is emerging extensively as a critical technology in the next-generation communication. This paper firstly reviews the relevant progress in recent research. A brief survey is presented on high-speed, long-range E-band communication systems and their relevant techniques that are essential to the link design, including antenna, power amplifier (PA), channel, and digital baseband processing. In the second part, we review our recent field trial of a long-range air-to-ground E-band link, which maintains steady transmission from a slow-moving helium balloon to the ground station with a vertical dimension of 20 km. The improvement directions and future research topics are then discussed.


Asunto(s)
Comunicación , Mantenimiento , Tecnología , Aeronaves , Amplificadores Electrónicos
3.
Bioelectromagnetics ; 41(6): 413-424, 2020 Sep.
Artículo en Inglés | MEDLINE | ID: mdl-32533598

RESUMEN

A dielectric biconical antenna (DiBiCA) for radiating subnanosecond pulses to treat subcutaneous tissue was designed, constructed, and tested. It is composed of a conical wave launcher and truncated conical emitter. In between, there is a short cylinder that provides a space for a ring terminating resistor. The material of the antenna has a dielectric constant of 28, so its size is small (length: 7 cm and aperture diameter: 2.2 cm). It was housed in an oil container to withstand high voltages and avoid surface flashover. The radiated electric field, measured in water, increased as the input voltage increased up to 30 kV but leveled off for higher voltages up to 50 kV, presumably because of losses in the antenna dielectric. The maximum field was 1.5 kV/cm for a depth of 5 mm and 1.0 kV/cm for a depth of 20 mm. Although the dielectric loss mechanism remains to be investigated, the antenna can be useful for noninvasive delivery of subnanosecond pulses to induce biological responses on subcutaneous targets. The DiBiCA radiated pulses were shown to change the viabilities of dendritic cells and macrophages for 10-min exposure. Bioelectromagnetics. 2020;41:413-424. © 2020 Bioelectromagnetics Society.


Asunto(s)
Células Dendríticas/citología , Estimulación Eléctrica , Macrófagos/citología , Supervivencia Celular , Impedancia Eléctrica , Humanos
4.
IEEE Trans Biomed Eng ; 65(7): 1452-1459, 2018 07.
Artículo en Inglés | MEDLINE | ID: mdl-28981405

RESUMEN

OBJECTIVE: In this study, we present the design, fabrication, and evaluation of a curved-array-based photoacoustic imaging system designed for imaging vasculatures inside human finger joints with multispectral strategy. METHODS: The transducers were fabricated with polyvinylidene fluoride (PVDF) film with a size of 30 mm × 2.8 mm and a curvature radius of 82 mm. A detailed comparison between the PVDF transducer and commercial piezoelectric ceramic transducers was performed. In addition, phantom and in vivo mouse experiments were carried out to evaluate the system performance. Furthermore, we recruited healthy volunteers and did multispectral photoacoustic imaging of blood vessels in finger joints. RESULTS: The transducers have an average center frequency of 6.6 MHz and a mean bandwidth of 95%. The lateral and axial resolutions of the system are 110 and 800 µm, respectively, and the diameter of the active imaging is larger than 50 mm. We successfully captured the drug-induced cerebral bleeding spots in intact mouse brains, and recovered both morphology and oxygen saturation of the blood vessels in human finger joints. CONCLUSIONS: The PVDF transducer has a better performance in bandwidth compared with commercial transducers. The curved design of the transducer offers a better sensitivity and a higher axial resolution compared with the flat design. SIGNIFICANCE: Based on the phantom, animal, and human experiments, the proposed system has the potential to be used in clinical diagnosis of early-stage arthritis.


Asunto(s)
Articulaciones de los Dedos/diagnóstico por imagen , Técnicas Fotoacústicas/métodos , Animales , Hemorragia Cerebral/diagnóstico por imagen , Diseño de Equipo , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Ratones , Fantasmas de Imagen , Técnicas Fotoacústicas/instrumentación , Transductores
5.
Nano Lett ; 15(5): 3501-6, 2015 May 13.
Artículo en Inglés | MEDLINE | ID: mdl-25919444

RESUMEN

The past few decades have witnessed a substantial increase in terahertz (THz) research. Utilizing THz waves to transmit communication and imaging data has created a high demand for phase and amplitude modulation. However, current active THz devices, including modulators and switches, still cannot meet THz system demands. Double-channel heterostructures, an alternative semiconductor system, can support nanoscale two-dimensional electron gases (2DEGs) with high carrier concentration and mobility and provide a new way to develop active THz devices. In this Letter, we present a composite metamaterial structure that combines an equivalent collective dipolar array with a double-channel heterostructure to obtain an effective, ultrafast, and all-electronic grid-controlled THz modulator. Electrical control allows for resonant mode conversion between two different dipolar resonances in the active device, which significantly improves the modulation speed and depth. This THz modulator is the first to achieve a 1 GHz modulation speed and 85% modulation depth during real-time dynamic tests. Moreover, a 1.19 rad phase shift was realized. A wireless free-space-modulation THz communication system based on this external THz modulator was tested using 0.2 Gbps eye patterns. Therefore, this active composite metamaterial modulator provides a basis for the development of effective and ultrafast dynamic devices for THz wireless communication and imaging systems.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA