RESUMEN

In this work, a fluorescent probe N with aggregation-induced emission effect was synthesized by grafting naphtho[2,3-c]furan-1,3-dione and 2-hydrazinylbenzo[d]thiazole. The probe N could recognize La3+ selectively and sensitively accompanied with an obvious fluorescence and color change from green to blue. Moreover, with the help of AIE properties, probe N achieved the detection of La3+ in the solid state.

RESUMEN

Alzheimer's disease is associated both with imbalances in Al3+ production and changes in viscosity in cells. Their simultaneous measurement could therefore provide valuable insights into Alzheimer's disease pathology. Their simultaneous measurement would therefore be of great value in investigating the pathological mechanism of Alzheimer's disease. We designed a fluorescent probe YM2T with AIE effect that is capable of selectively responding to Al3+ by fluorescence colormetrics and to viscosity by fluorescence "turn on" modes. Additionally, Al3+ and viscosity were simultaneously detected in PC12 cells using the low cytotoxic probe YM2T via blue and green fluorescence channels. More importantly, the YM2T probe was used to image mice with AD. Hence, the YM2T probe shows potential as a useful molecular instrument for studying the pathological impact of Al3+ and viscosity.

Asunto(s)

RESUMEN

Efficient separation of CH4 from N2 is essential for the purification of methane from nitrogen. In order to address this problem, composite materials consisting of rod-shaped SBA-15-based UiO-66-Br2 were synthesized for the purpose of separating a CH4/N2 mixture. The materials were characterized via PXRD, N2 adsorption-desorption, SEM, TEM, FT-IR, and TGA. The adsorption isotherms of CH4 and N2 under standard pressure conditions for the composites were determined and subsequently compared. The study revealed that the composites were formed through the growth of MOF nanocrystals on the surfaces of the SBA-15 matrix. The enhancements in surface area and adsorption capacity of hybrid materials were attributed to the structural modifications resulting from the interactions between surface silanol groups and metal centers. The selectivity of the composites towards a gas mixture of CH4 and N2 was assessed utilizing the Langmuir adsorption equation. The results of the analysis revealed that the U6B2S5/SBA-15 sample exhibited the greatest selectivity for CH4/N2 adsorption compared to the other samples, with an adsorption selectivity parameter (S) of 20.06. Additional research is necessary to enhance the enrichment of methane from CH4/N2 mixtures using SBA-15-based metal-organic framework materials.

RESUMEN

The synthesis and characterization of two new porphyrin-based porous organic polymers (POPs) via Sonogashira cross-coupling reaction and leverage the two obtained POPs is reported for the fabrication of electrochemical aptasensors to detect kanamycin at an ultratrace level. The resultant electrochemical aptasensor demonstrates a high linear relationship with the logarithmic value of kanamycin concentration in the range 5 × 10-5-5 µg/L with the limit of detection of 17.6 pg/L or 36.3 fM. During the analysis of real samples from milk and river, a relative standard deviation of less than 4.39%, and good recovery values in the range 97.0-105% were obtained.

RESUMEN

Erythromycin could be used to treat various bacterial infection, but it was harmful to the colonic microflora. Therefore, it is highly desirable to develop a fluorescence probe that could selectively and sensitively detect Erythromycin in pure water. In this work, a fluorescent probe named EHMC, which exhibited aggregation-induced emission (AIE) characteristic in solid state and water/EtOH binary solvent was developed for "turn on" sensing Erythromycin in pure water with high selectivity and sensitivity (detection limit: 1.78 × 10-8 M). Also, there are fewer interference from other antibiotics in the detection process of probe EHMC for Erythromycin. Moreover, probe EHMC could as a portable test strips for highly selective detection of Erythromycin and identification of different concentrations of Erythromycin. In addition, living cells imaging experiments displayed that probe EHMC could detect Erythromycin in A549 cells and BEAS-2B cells successfully. Combined with the theoretical calculation results The sensing mechanisms that the CO in Erythromycin and OH in EHMC formed intermolecular hydrogen bond and further formed new aggregates were confirmed by job' plot, 1H NMR, FT-IR, ESI-MS, DLS and TEM and DFT calculation.

Asunto(s)

RESUMEN

Metal-organic frameworks (MOFs) have a good designability, a well-defined pore, stimulus responsiveness, a high surface area, and a controllable morphology. Up to now, various MOFs have been widely used as nanocarriers and have attracted lots of attention in the field of drug delivery and release because of their good biocompatibility and high-drug-loading capacity. Herein, we provide a comprehensive summary of MOF-based nanocarriers for drug delivery and release over the last five years. Meanwhile, some representative examples are highlighted in detail according to four categories, including the University of Oslo MOFs, Fe-MOFs, cyclodextrin MOFs, and other MOFs. Moreover, the opportunities and challenges of MOF-based smart delivery vehicles are discussed. We hope that this review will be helpful for researchers to understand the recent developments and challenges of MOF-based drug-delivery systems.

RESUMEN

Two-dimensional (2D) metal-organic frameworks (MOFs) have been extensively investigated as oxygen evolution reaction (OER) materials because of their numerous advantages such as large specific surface areas, ultrathin thicknesses, well-defined active metal centers, and adjustable pore structures. Five Co-metal-organic frameworks, namely, [Co(L) (4.4'-bbidpe)H2O]n [YMUN 1 (YMUN for Youjiang Medical University for Nationalities)], {[Co2(L)2 (4.4'-bbibp)2]·[Co3(L) (4.4'-bbibp)]·DMAC}n (YMUN 2), [Co(L) (3,5-bip)]n (YMUN 3), [Co(L) (1,4-bimb)]n (YMUN 4), and [Co(L) (4.4'-bidpe)H2O]n (YMUN 5), were designed and fabricated from flexible dicarboxylic acid 1,3-bis(4'-carboxylphenoxy)benzene (H2L) and rigid/flexible imidazole ligands. Their frameworks consist of two-dimensional lamellar networks with a number of differences in their details. Their frameworks are discussed and compared, and their oxygen evolution reaction electrochemical activities and photocatalysis dye degradation properties are investigated.

RESUMEN

An easy prepared probe, BHMMP, was designed and synthesized, which displayed a significant fluorescence enhancement (over 38-fold) and obvious color change in the recognition of Al3+. The binding ratio of probe BHMMP to Al3+ was determined as 1:1, according to Job plot. The binding mechanism was fully clarified by the experiments, such as FT-IR spectrum, ESI-MS analysis, and 1H NMR titration. A DFT study further confirmed the binding mode of BHMMP to Al3+. The limit of detection (LOD) for Al3+ was determined as low as 0.70 µM, based on the fluorescence titration of BHMMP. Moreover, the results from real sample experiments, including real water samples, test papers, and cell images, well-demonstrated that BHMMP was capable of sensing Al3+ in environmental and biological systems.

Asunto(s)

RESUMEN

During mouse oocyte meiotic maturation, actin filaments play multiple roles in meiosis such as spindle migration and cytokinesis. FASCIN is shown to be an actin-binding and bundling protein, making actin filaments tightly packed and parallel-aligned, and FASCIN is involved in several cellular processes like adhesion and migration. FASCIN is also a potential prognostic biomarker and therapeutic target for the treatment of metastatic disease. However, little is known about the functions of FASCIN in oocyte meiosis. In the present study, we knocked down the expression of FASCIN, and our results showed that FASCIN was essential for oocyte maturation. FASCIN was all expressed in the different stages of oocyte meiosis, and it mainly localized at the cortex of oocytes from the GV stage to the MII stage and showed a similar localization pattern with actin and DAAM1. Depletion of FASCIN affected the extrusion of the first polar body, and we also observed that some oocytes extruded from the large polar bodies. This might have resulted from the defects of actin assembly, which further affected the meiotic spindle positioning. In addition, we showed that inhibition of PKC activity decreased FASCIN expression, indicating that FASCIN might be regulated by PKC. Taken together, our results provided evidence for the important role of FASCIN on actin filaments for spindle migration and polar body extrusion in mouse oocyte meiosis.

Asunto(s)

RESUMEN

Two novel 3D fluorescent metal-organic frameworks (MOFs), [Cd(L)(bbibp)]n (1) and [Cd(L)(bbibp)0.5]n (2), where H2L = 4,4'-(4,4'-bipyridine-2,6-diyl)dibenzoic acid and bbibp = 4,4'-bis(benzoimidaz-1-yl)biphenyl, were acquired through a conventional method and characterized via IR spectra, single-crystal X-ray diffraction, elemental analysis, thermogravimetric analysis, powder X-ray diffraction (PXRD), scanning electron microscopy, N2 adsorption-desorption isotherms, and X-ray photoelectron spectroscopy (XPS). The crystal framework of Cd-MOF 1 remained stable in the range of pH = 1.0-12.0. Interestingly, the emission peak of 1 showed a red shift and exhibited a fluorescence turn-on effect in an acidic environment. X-ray diffraction measurement revealed that the crystal structure of 1 remained unchanged after immersion in a pH = 1.0 solution. In addition, Cd-MOFs 1 and 2 displayed fluorescent quenching to l-glutamic acid with high sensitivity and selectivity. Meanwhile, 1 showed high selectivity in recognizing Fe3+ under acidic conditions, which made 1 capable of detecting Fe3+ in acidic industrial wastewater. Finally, the fluorescent sensing mechanism was carefully studied by PXRD, transient fluorescence lifetime, XPS, and UV spectroscopy.

RESUMEN

Al3+ and H2S play essential roles in various physiological processes. However, excess Al3+ and H2S are harmful to health. Therefore, it is necessary to design a sensitive method for the detection of Al3+ and H2S. In this work, compound L was developed based on salicylaldoxime and 4-aminobenzamide. L displayed aggregation-induced emission (AIE) characteristics in the solid state due to a unique dimer formation via intermolecular hydrogen bonds. In addition, L could serve as a multi-responsive fluorescence probe for Al3+ based on the coordination reaction in a MeOH/H2O (9/1, v/v, pH = 7.4) medium and for H2S based on the addition reaction in EtOH/H2O (7/3, v/v, pH = 7.4) solution. In addition, L showed a fluorescence colorimetric response to Al3+ in the solid state. Furthermore, L was applied to detect Al3+ and H2S in actual water samples.

RESUMEN

In this work, four novel metal-organic frameworks [Cd(bipa)] n (1), {[Zn2(bipa)2]·2C2H5OH} n (2), {[Co(bipa)]·C2H5OH} n (3), {[Ni(bipa)2]·2DMA} n (4), (H2bipa = 5-(benzimidazole-1-yl)isophthalic acid) were successfully synthesized under solvothermal conditions. Complexes 1-4 were characterized by powder X-ray diffraction, elemental analysis, infrared spectroscopy and thermogravimetric analysis. Interestingly, the coordination patterns and 3D network structures of complexes 1-3 are very similar, while complex 4 is relatively unique. Complexes 1-2 exhibit potential fluorescent properties. Complex 1 can selectively and sensitively detect trace Fe(iii) and Cr(vi) in water by fluorescence quenching detection, and the quenching mechanism is further discussed.