RESUMEN
Magnetic refrigeration is an upcoming technology that could be an alternative to the more than 100-year-old conventional gas-vapor compression cooling. Magnetic refrigeration might answer some of the global challenges linked with the increasing demands for readily available cooling in almost every region of the world and the global-warming potential of conventional refrigerants. Important issues to be solved are, for example, the required mass and the ecological footprint of the rare-earth permanent magnets and the magnetocaloric material, which are key parts of the magnetic cooling device. The majority of existing demonstrators use Nd-Fe-B permanent magnets, which account for more than 50% of the ecological footprint, and Gd, which is a critical raw material. This work shows a solution to these problems by demonstrating the world's first magnetocaloric demonstrator that uses recycled Nd-Fe-B magnets as the magnetic field source, and, as a Gd replacement material, La-Fe-Mn-Si for the magnetocaloric heat exchanger. These solutions show that it is possible to reduce the ecological footprint of magnetic cooling devices and provides magnetic cooling as a green solid-state technology that has the potential to satisfy the rapidly growing global demands.
RESUMEN
Neodymium-iron-boron (NdFeB) magnets offer the strongest magnetic field per unit volume, and thus, are widely used in clean energy applications such as electric vehicle motors. However, rare earth elements (REEs), which are the key materials for creating NdFeB magnets, have been subject to significant supply uncertainty in the past decade. NdFeB magnet-to-magnet recycling has recently emerged as a promising strategy to mitigate this supply risk. This paper assesses the environmental footprint of NdFeB magnet-to-magnet recycling by directly measuring the environmental inputs and outputs from relevant industries and compares the results with production from "virgin" materials, using life cycle assessments. It was found that magnet-to-magnet recycling lowers environmental impacts by 64-96%, depending on the specific impact categories under investigation. With magnet-to-magnet recycling, key processes that contribute 77-95% of the total impacts were identified to be (1) hydrogen mixing and milling (13-52%), (2) sintering and annealing (6-24%), and (3) electroplating (6-75%). The inputs from industrial sphere that play key roles in creating these impacts were electricity (24-93% of the total impact) and nickel (5-75%) for coating. Therefore, alternative energy sources such as wind and hydroelectric power are suggested to further reduce the overall environmental footprint of NdFeB magnet-to-magnet recycling.