RESUMEN

OBJECTIVES: This study aimed to assess the effect of addition of silica-hydroxyapatite-silver (Si-HA-Ag) hybrid nanoparticles to light-cure glass ionomer (GI) on shear bond strength (SBS) of metal brackets bonded with this adhesive and the adhesive remnant index (ARI) score. MATERIAL AND METHODS: In this in vitro experimental study, 50 sound extracted premolars were assigned to 5 groups (n=10) for orthodontic metal bracket bonding with BracePaste® composite, Fuji ORTHO™ pure resin modified GI (RMGI), and RMGI reinforced with 2wt%, 5wt% and 10wt% Si-HA-Ag nanoparticles. The SBS of brackets was measured by a universal testing machine. Debonded specimens were inspected under a stereomicroscope at×10 magnification to determine the ARI score. Data were analyzed by one-way ANOVA, Scheffe test, Chi-square test, and Fisher's exact test (alpha=0.05). RESULTS: The maximum mean SBS was recorded in BracePaste® composite followed by 2% RMGI, 0% RMGI, 5% RMGI and 10% RMGI. Only the difference between the BracePaste® composite and 10% RMGI was significant in this regard (P=0.006). The groups were not significantly different regarding the ARI scores (P=0.665). All the SBS values were within the clinically acceptable range. CONCLUSION: Addition of 2wt% and 5wt% Si-HA-Ag hybrid nanoparticles to RMGI as orthodontic adhesive caused no significant change in SBS of orthodontic metal brackets while addition of 10wt% hybrid nanoparticles significantly decreased the SBS. Nonetheless, all the SBS values were within the clinically acceptable range. Addition of hybrid nanoparticles had no significant effect on the ARI score.

Asunto(s)

RESUMEN

INTRODUCTION: The use of technology in bulk-fill composites (BCs) has reduced the stresses caused by polymerization shrinkage, debonding, microleakage, or posttreatment sensitivity in them. This study was conducted to determine whether bleaching affects the microleakage of class II restoration with bulk-fill material. MATERIALS AND METHODS: This laboratory study was performed on 40 normal human premolars in 4 groups (n = 20). Class II cavities were prepared in mesial and distal surfaces of the teeth with dimensions of 2 × 2 × 4 mm. Then, based on the bleaching process by 20% carbamide peroxide gel and using two types of composites, the restored cavities were randomly divided into 4 groups: (1) CC without bleaching (CC group), (2) BC without bleaching (BC group), (3) CC with bleaching (CCB group), and (4) BC with bleaching (BCB group). Then, the samples were thermocycled for 1000 cycles at a temperature range of 5-55°C, and they were immersed in 0.6% alkaline fuchsine in order to penetrate into the pigment for 24 h. After cutting, the samples were placed under a stereomicroscope (40%) to determine microleakage. The data were analyzed using one-way analysis of variance (ANOVA), and a p value <0.05 was considered as statistically significant. RESULTS: Microleakage was determined in the CC group (0.97 ± 0.42), BC group (1.08 ± 0.54), CCB group (1.19 ± 0.37), and BCB group (0.30 ± 0.47). There were also no significant differences in the mean microleakage between the groups. No cases with zero microleakage (no microleakage) and grade 3 of microleakage (pigment penetration into the axial wall) were observed in the samples. Also, a two-by-two comparison of significant differences between CC and BC groups (p=0.89), CC and CCB groups (p=0.45), CC and BCB groups (p=0.11), BC and CCB groups (p=0.87), BC and BCB groups (p=0.41), and CCB and BCB groups (p=0.86) showed that the difference was not statistically significant. CONCLUSION: Results showed no difference between microleakage of BC and CC with and without bleaching, and bleaching had the same effect on microleakage of these two types of composites.

RESUMEN

Abstract Objective: To evaluate the microleakage at the junction between amalgam-composite resin restorations using different bonding systems. Material and Methods: In this in-vitro study, standard class II cavities were prepared on 40 human maxillary premolars. The axial and gingival floor depths of the cavities were 2 mm and 1 mm below (cementoenamel junction), respectively. The samples were divided into 4 groups (n = 10). In all groups, a layer of 1-mm thick amalgam was used as a coating for the initial part of the gingival floor. In group 1, no bonding system was used for amalgam restoration. In group 2, G-Premio Bond was applied. G-Premio bond + alloy primer and single bond + alloy primer were used in group 3 and group 4, respectively. The rest of the cavities in all groups were then repaired using FiltekZ250 composite. The samples were thermocycled at 500 rpm and immersed in 1% methylene blue solution for 24 hours to allow dye penetration. Once cut, the samples were placed under a stereomicroscope (40X) to determine the microleakage rate. Data analysis was carried out using post-hoc and Chi-square tests (p<0.05). Results: The highest and lowest microleakage rate was related to groups 1 and 3, respectively. There was a significant difference between groups (1,2) and (1,3), and (1,4), and groups (2,3) (p<0.05). Conclusion: The use of alloy primer and bonding could reduce the microleakage between the two restorations (AU).

Asunto(s)

RESUMEN

BACKGROUND: Light curing of resin composite is associated with a thermal rise that may have harmful effect on the health of the vital pulp. In addition, desirable polymerization is important to achieve mechanical properties and clinical function. The purpose of this in-vitro study was to compare the thermal rise under normal dentin during photopolymerization and degree of conversion (DC) of bulk fill and conventional resin composite using continuous high- and soft-start mode. MATERIALS AND METHODS: In this in-vitro study, Cl I cavities with a dimension of 4 mm × 4 mm × 4 mm and remaining dentin thickness of 1 mm were prepared on 56 extracted human molars. The temperature rise during the light curing of conventional resin composite (Tetric N Ceram, Ivoclar Vivadent) by incremental filling technique and bulk-fill resin composite (Tetric N Ceram Bulk Fill, Ivoclar Vivadent) by bulk-filling technique were measured with a K-type thermocouple wire. DC of both resin composites was measured using Fourier-transform infrared spectroscopy. Data were analyzed using one-way ANOVA, Tamhane and Duncan post hoc, two-way ANOVA at the significance level of α = 0.05. RESULTS: Photopolymerization temperature rise due to soft start mode and the first layer of conventional composite was higher than continuous high mode and bulk-filling technique, respectively (P < 0.001). DC of conventional resin composite was higher than bulk-fill composite (P < 0.001). CONCLUSION: Soft-start mode produced higher thermal rise than continuous high mode and conventional resin composite showed higher DC than bulk-fill composite.

RESUMEN

Abstract Objective: To evaluate the effect of a resin coating material on the microleakage of Class V composite resin restorations with and without post-operative bleaching. Material and Methods: Eighty class V cavities (3×3×1.5 mm) were prepared and filled with Z250 XT composite resin in the buccal and lingual surfaces of 40 sound human molars. Then the samples were randomly divided into 4 groups (n=20) and treated as follows: Group A: applying a resin coating (G-Coat Plus) on the restoration, then bleaching with 40% hydrogen peroxide; Group B: Post-Operative bleaching without prior use of resin coating; Group C: applying resin coating agent, and no further bleaching; and Group D: no resin coating, no bleaching. The specimens were thermocycled and immersed in 1% methylene blue for 24 hours, then cut into sections bucco-lingually. The samples were scored regarding the amount of dye penetration under a stereomicroscope (x20). Data were analyzed with Chi-squared and Fisher exact tests (p<0.05). Results: The maximum gingival and occlusal microleakage was detected in group B, while the minimum was seen in group C. In all the groups, microleakage at gingival margins was higher than occlusal margins (p<0.001). Conclusion: Application of a resin coating is an effective method in reducing microleakage of the restorations before and after bleaching.

Asunto(s)

RESUMEN

Objective: To evaluate the effect of cavity dimensions on the amount of microleakage in two different types of bulk-fill composite resins. Material and Methods: Forty class II cavities were prepared in the mesial and distal surfaces of human molars without any carious lesions. The samples were divided into 4 groups (n=10): Group 1: cavities with 3 mm of buccolingual width (known as the smaller cavity), filled with Tetric N-Ceram Bulk Fill composite resin; Group 2: cavities with 6 mm of buccolingual width (larger cavity), filled with Tetric N-Ceram Bulk Fill composite resin; Group 3: cavities with 3 mm of buccolingual width, filled with X-Tra Base composite resin; and Group 4: cavities with 6 mm of buccolingual width, filled with X-Tra Base composite. After the specimens were thermocycled for 500 cycles at 5/55°C, they were immersed in 1% methylene blue for 24 hours, and then cut into sections mesiodistally in the longitudinal axis of each tooth. Then, the samples were scored regarding the amount of dye penetration in two occlusal and gingival areas under a stereomicroscope (x32). Data was submitted to Kruskal- Wallis and Mann-Whitney tests. Results: The highest degrees of microleakage in larger cavities filled with X-Tra Base among the four groups. There was a significant statistic difference (p=0.012) between large and small cavities filled with X-Tra Base (Groups 3 and 4); however, there was no significant difference between the two cavity sizes of Tetric N-Ceram Bulk-filled groups. Conclusion: Microleakage of composite resins depends on the dimension of the cavity and the type of composite resin used.

Asunto(s)

RESUMEN

STATEMENT OF THE PROBLEM: Dental caries is a common chronic disease. Mouthwashes and other preventive approaches play an important role in caries prevention. Finding the most efficient mouthwash in the market is always a concern for dentists and patients. PURPOSE: This study aimed to assess the effect of chlorhexidine (Behsa, Iran) and xylitol plus 920 ppm fluoride (FX) (Fuchs, Germany) mouthwash on salivary Streptococcus mutans (S. mutans), which is the main microorganism responsible for dental caries. MATERIALS AND METHOD: This single-blind randomized clinical trial was conducted on 30 dental students, divided into two groups. The salivary count of S. mutans was measured at the beginning of the study. Group 1 students used chlorhexidine mouthwash while group 2 used FX mouthwash for two weeks. Saliva samples were collected again and salivary count of S. mutans was determined. Data were analyzed using Mann Whitney and Wilcoxon signed rank tests. RESULTS: Salivary count of S.mutans significantly decreased in the two groups after using the mouthwashes (p< 0.05) and no significant difference was noted in the mean colony count between the two groups after the use of mouthwashes (p> 0.05). CONCLUSION: Within the limitations of this study, the results showed that both mouthwashes could decrease S. mutans count.