RESUMEN

Stretchable interconnects with miniature widths are vital for the high-density integration of deformable electronic components on a single substrate for targeted data logic or storage functions. However, it is still challenging to attain high-resolution patternability of stretchable conductors with robust circuit fabrication capability. Here, we report a self-assembled silver nanofilm firmly interlocked by an elastomeric nanodielectric that can be photolithographically patterned into microscale features while preserving high stretchability and conductivity. Both silver and dielectric nanofilms are fabricated by layer-by-layer assembly, ensuring wafer-scale uniformity and meticulous control of thicknesses. Without any thermal annealing, the as-fabricated nanofilms from silver nanoparticles (AgNPs) exhibit conductivity of 1.54 × 106 S m-1 and stretchability of ∼200%, which is due to the impeded crack propagation by the underlying PU nanodielectrics. Furthermore, it is revealed that AgNP microstrips defined by photolithography show higher stretchability when their widths are downscaled to 100 µm owing to confined cracks. However, further scaling restricts the stretchability, following the early development of cracks cutting across the strip. In addition, the resistance change of these silver interconnects can be decreased using serpentine architectures. As a demonstration, these self-assembled interconnects are used as stretchable circuit boards to power LEDs.

RESUMEN

Elastomeric dielectrics are crucial for reliably governing the carrier densities in semiconducting channels during deformation in soft/stretchable field-effect transistors (FETs). Uncontrolled stacking of polymeric chains renders elastomeric dielectrics poorly insulated at nanoscale thicknesses, thereby thick films are usually required, leading to high voltage or power consumption for on/off operations of FETs. Here, layer-by-layer assembly is exploited to build 15-nm-thick elastomeric nanodielectrics through alternative adsorption of oppositely charged polyurethanes (PUs) for soft and hysteresis-free FETs. After mild thermal annealing to heal pinholes, such PU multilayers offer high areal capacitances of 237 nF cm-2 and low leakage current densities of 3.2 × 10-8 A cm-2 at 2 V. Owing to the intrinsic ductility of the elastomeric PUs, the nanofilms possess excellent dielectric properties at a strain of 5% or a bending radius of 1.5 mm, while the wrinkled counterparts show mechanical stability with negligible changes of leakage currents after repeated stretching to a strain of 50%. Besides, these nanodielectrics are immune to high humidity and conserve their properties when immersed into water, despite their assembly occurs aqueously. Furthermore, the PU dielectrics are implemented in carbon nanotube FETs, demonstrating low-voltage operations (< 1.5 V) and negligible hysteresis without any encapsulations.

RESUMEN

Microbial community structures and performance of air-cathode microbial fuel cells (MFCs) inoculated with activated sludge from domestic wastewater were investigated to evaluate the effects of three substrate pre-acclimation strategies: 1, serial pre-acclimation with acetate and glucose before supplying domestic wastewater; 2, one step pre-acclimation with acetate before supplying domestic wastewater; and 3, direct supply of domestic wastewater without any pre-acclimation. Strategy 1 showed much higher current generation (1.4mA) and Coulombic efficiency (33.5%) than strategies 2 (0.7mA and 9.4%) and 3 (0.9mA and 10.3%). Pyrosequencing showed that microbial communities were significantly affected by pre-acclimation strategy. Although Proteobacteria was the dominant phylum with all strategies, Actinobacteria was abundant when MFCs were pre-acclimated with glucose after acetate. Not only anode-respiring bacteria (ARB) in the genus Geobacter but also non-ARB belonging to the family Anaerolinaceae seemed to play important roles in air-cathode MFCs to produce electricity from domestic wastewater.

Asunto(s)

RESUMEN

Anaerobic digestion was regarded as one of the ways to recover energy from mixed-microalgae biomass in this study. After applying thermal-, ultrasonic-, and alkali-pretreatments to raw microalgae biomass to promote the digestion efficiency, a biochemical methane potential was investigated to evaluate the effectiveness of the pre-treatments for the purpose. As the pretreatment intensity increased, the solubilization of the mixed microalgae increased. However, the increased solubilization was not followed proportionally by the increased methane production. The highest methane productivity was achieved by the thermal-pretreatment at 120 °C (405 mL CH4/g-VS), which was 1.2 times higher than that of the non-pretreatment condition (336 mL CH4/g-VS). The net energy analysis revealed that only the pretreatment adjusted to pH 9 yielded a slightly higher energy gains (12.8 kJ/g-VS) than that of non-pretreatment condition (11.9 kJ/g-VS). These findings recommend direct supply of microalgae biomass for anaerobic digestion.

Asunto(s)