RESUMEN
The matching of poly(ethylene oxide) (PEO)-based electrolytes with ultrahigh-nickel cathode materials is crucial for designing new-generation high-energy-density solid-state lithium metal batteries (SLMBs), but it is limited by serious interfacial side reactions between PEO and ultrahigh-nickel materials. Here, a high-concentration electrolyte (HCE) interface with a customized Li+ solvation sheath is constructed between the cathode and the electrolyte. It induces the formation of an anion-regulated robust cathode/electrolyte interface (CEI), reduces the unstable free-state solvent, and finally achieves the compatibility of PEO-based electrolytes with ultrahigh-nickel cathode materials. Meanwhile, the corrosion of the Al current collector caused by lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) ions is prevented by lithium difluoro(oxalato)borate (LiDFOB) ions. The synergistic effect of the double lithium salt is achieved by a well-tailored ratio of TFSI- and DFOB- in the first solvation sheath of Li+. Compared with reported PEO-based SLMBs matched with ultrahigh-nickel (Ni ≥ 90%) cathodes, the SLMB in this work delivers a high discharge specific capacity of 216.4 mAh g-1 (0.1C) even at room temperature. This work points out a direction to optimize the cathode/electrolyte interface.
RESUMEN
The Ni-rich layered cathode material LiNi0.8Co0.1Mn0.1O2 (NCM811) with high specific capacity and acceptable rate performance is one of the key cathode materials for high-energy-density lithium-ion batteries. Coprecipitation, the widely utilized method in the precursor synthesis of NCM811 materials, however, suffers long synthetic processes and challenges in uniform element distribution. The spray pyrolysis method is able to prepare oxide precursors in seconds where all transition-metal elements are well distributed, but the difficulty of lithium distribution will also arise when the lithium salts are added in the subsequent sintering process. Herein, a fresh one-step spray pyrolysis approach is proposed for preparing high-performance NCM811 cathode materials by synthesizing lithium-contained precursors in which all elements are well distributed at a molecular level. The precursors with folded morphology and exceptional uniformity are successfully obtained at a low pyrolysis temperature of 300 °C by an acetate system. Furthermore, the final products commendably inherit the folded morphology of the precursors and exhibit excellent cyclic retentions of 94.6% and 88.8% after 100 and 200 cycles at 1 C (1 C = 200 mA g-1), respectively.
RESUMEN
Nickel-rich layered oxides LiNi x Co y Mn1- x - y O2 (x ≥ 0.8) have been recognized as the preferred cathode materials to develop lithium-ion batteries with high energy density (>300 Wh kg-1). However, the poor cycling stability and rate capability stemming from intergranular cracks and sluggish kinetics hinder their commercialization. To address such issues, a multi-scale boron penetration strategy is designed and applied on the polycrystalline LiNi0.83Co0.11Mn0.06O2 particles that are pre-treated with pore construction. The lithium-ion conductive lithium borate in grain gaps functions as the grain binder that can bear the strain/stress from anisotropic contraction/expansion, and provides more pathways for lithium-ion diffusion. As a result, the intergranular cracks are ameliorated and the lithium-ion diffusion kinetics is improved. Moreover, the coating layer separates the sensitive cathode surface and electrolyte, helping to suppress the parasitic reactions and related gas evolution. In addition, the enhanced structural stability is acquired by strong B-O bonds with trace boron doping. As a result, the boron-modified sample with an optimized boron content of 0.5% (B5-NCM) exhibits a higher initial discharge capacity of 205.5 mAh g-1 at 0.1C (1C = 200 mA g-1) and improved capacity retention of 81.7% after 100 cycles at 1C. Furthermore, the rate performance is distinctly enhanced by high lithium-ion conductive LBO (175.6 mAh g-1 for B5-NCM and 154.6 mAh g-1 for B0-NCM at 5C).
RESUMEN
Single-crystal nickel-rich cathode materials (SC-NRCMs) are the most promising candidates for next-generation power batteries which enable longer driving range and reliable safety. In this review, the outstanding advantages of SC-NRCMs are discussed systematically in aspects of structural and thermal stabilities. Particularly, the intergranular-crack-free morphology exhibits superior cycling performance and negligible parasitic reactions even under severe conditions. Besides, various synthetic methods are summarized and the relation between precursor, sintering process, and final single-crystal products are revealed, providing a full view of synthetic methods. Then, challenges of SC-NRCMs in fields of kinetics of lithium diffusion and the one particularly occurred at high voltage (intragranular cracks and aggravated parasitic reactions) are discussed. The corresponding mechanism and modifications are also referred. Through this review, it is aimed to highlight the magical morphology of SC-NRCMs for application perspective and provide a reference for following researchers.