RESUMEN
Atomic layer deposition (ALD) raises global interest through its unparalleled conformality. This work describes new microscopic lateral high-aspect-ratio (LHAR) test structures for conformality analysis of ALD. The LHAR structures are made of silicon and consist of rectangular channels supported by pillars. Extreme aspect ratios even beyond 10 000 : 1 enable investigations where the adsorption front does not penetrate to the end of the channel, thus exposing the saturation profile for detailed analysis. We use the archetypical trimethylaluminum (TMA)-water ALD process to grow alumina as a test vehicle to demonstrate the applicability, repeatability and reproducibility of the saturation profile measurement and to provide a benchmark for future saturation profile studies. Through varying the TMA reaction and purge times, we obtained new information on the surface chemistry characteristics and the chemisorption kinetics of this widely studied ALD process. New saturation profile related classifications and terminology are proposed.
RESUMEN
We present a computational study of spontaneous polarization and piezoelectricity in Sc(x)Al(1-x)N alloys in the compositional range from x = 0 to x = 0.5, obtained in the context of density functional theory and the Berry-phase theory of electric polarization using large periodic supercells. We report composition-dependent values of piezoelectric coefficients e(ij), piezoelectric moduli d(ij) and elastic constants C(ij). The theoretical findings are complemented with experimental measurement of e33 for a series of sputtered ScAlN films carried out with a piezoelectric resonator. The rapid increase with Sc content of the piezoelectric response reported in previous studies is confirmed for the available data. A detailed description of the full methodology required to calculate the piezoelectric properties of ScAlN, with application to other complex alloys, is presented. In particular, we find that the large amount of internal strain present in ScAlN and its intricate relation with electric polarization make configurational sampling and the use of large supercells at different compositions necessary in order to accurately derive the piezoelectric response of the material.
RESUMEN
A 2-D model is developed for calculating lateral acoustical coupling between adjacent thin film BAW resonators forming an electrical N-port. The model is based on solution and superposition of lateral eigenmodes and eigenfrequencies in a structure consisting of adjacent regions with known plate wave dispersion properties. Mechanical and electrical response of the device are calculated as a superposition of eigenmodes according to voltage drive at one electrical port at a time while extracting current induced in the other ports, leading to a full Y-parameter description of the device. Exemplary cases are simulated to show the usefulness of the model in the study of the basic design rules of laterally coupled thin film BAW resonator filters. Model predictions are compared to an experimental 1.9-GHz band-pass filter based on aluminum nitride thin film technology and lateral acoustical coupling. Good agreement is obtained in prediction of passband behavior. The eigenmode-based model forms a useful tool for fast simulation of laterally coupled acoustic devices. It allows one to gain insight into basic device physics in a very intuitive fashion compared with more detailed but heavier finite element method. Shortcomings of this model and possible improvements are discussed.
RESUMEN
Zinc-oxide-based thin-film bulk acoustic wave (BAW) resonators operating at 932 MHz are investigated with respect to variation of dimensions of a boundary frame spurious mode suppression structure. A plate wave dispersion-based semi-2-D model and a 2-D finite element method are used to predict the eigenmode spectrum of the resonators to explain the detailed behavior. The models show how the boundary frame method changes the eigenmodes and their coupling to the driving electrical field via the modification of the mechanical boundary condition and leads to emergence of a flat-amplitude piston mode and suppression of spurious modes. Narrow band suppression of a single mode with a nonoptimal boundary frame is observed. Reduction of the effective electromechanical coupling coefficient k2eff as a function of the boundary width is observed and predicted by both models. The simple semi-2-D plate model is shown to predict the device behavior very well, and the 2-D finite element method results are shown to coincide with them with some additional effects. Breaking the resonator behavior down to eigenmodes, which are not directly observable in measurements, by the models, yields insight into the physics of the device operation.
RESUMEN
Thin film bulk acoustic wave (BAW) resonators (FBAR) are fabricated on a silicon nitride bridge using a ZnO piezolayer on a glass substrate and surface micromachining by standard thin film technology. These resonators exhibit a coupling constant k(t)2 = 7.8% at the first thickness extensional wave mode and are used as impedance elements in a ladder filter in the 1-GHz frequency band of mobile telecommunications. An electrical equivalent circuit is used to characterize the properties of the resonators and to show how the performance of the filter depends on the parameters of the resonators. 2.5% bandwidth, 2.8-dB insertion loss, and 35-dB selectivity are obtained in a filter with six resonators. The technology can be used to manufacture miniature microwave filters without any additional inductances.