RESUMEN
The interface between the perovskite layer and electron transporting layer is a critical determinate for the performance and stability of perovskite solar cells (PSCs). The heterogeneity of the interface critically affects the carrier dynamics at the buried interface. To address this, a bridging molecule, (2-aminoethyl)phosphonic acid (AEP), is introduced for the modification of SnO2/perovskite buried interface in n-i-p structure PSCs. The phosphonic acid group strongly bonds to the SnO2 surface, effectively suppressing the surface carrier traps and leakage current, and uniforming the surface potential. Meanwhile, the amino group influences the growth of perovskite film, resulting in higher crystallinity, phase purity, and fewer defects. Furthermore, the bridging molecules facilitate the charge extraction at the interface, as indicated by the femtosecond transient reflection (fs-TR) spectroscopy, leading to champion power conversion efficiency (PCE) of 26.40% (certified 25.98%) for PSCs. Additionally, the strengthened interface enables improved operational durability of ≈1400 h for the unencapsulated PSCs under ISOS-L-1I protocol.
RESUMEN
Organic-inorganic hybrid perovskites have emerged as highly promising candidates for photovoltaic applications, owing to the exceptional optoelectronic properties and low cost. Nonetheless, the performance and stability of solar cells suffer from the defect states of perovskite films aroused by non-optically active phases and non-centralized crystal orientation. Herein, a versatile organic molecule, Hydantoin, to modulate the crystallization of perovskite, is developed. Benefiting from the diverse functional groups, more spatially oriented perovskite films with high crystallinity are formed. This enhancement is accompanied by a conspicuous reduction in defect density, yielding efficiency of 25.66% (certified 25.15%), with superb environmental stability. Notably, under the standard measurement conditions (ISOS-L-1I), the maximum power point (MPP) output maintains 96.8% of the initial efficiency for 1600 h and exhibits excellent ion migration suppression. The synergistic regulation of crystallization and spatial orientation offers novel avenues for propelling perovskite solar cell (PSC) development.
RESUMEN
Organic-inorganic hybrid perovskites exhibit outstanding performances in perovskite solar cells (PSCs). However, the complex solution chemistry of perovskites precursors renders it difficult to prepare large-area devices in a reproducible way, which is a prerequisite for the technology to make an impact beyond lab scale. Vacuum processing, instead, is an established technology for large-scale coating of thin films. However, with respect to the hybrid perovskites it is highly challenging due to the high vapor pressure of the organic ammonium halide. In this work, vacuum evaporation of lead iodide and solution processing of organic ammonium halide is combined to produce large-area homogeneous perovskite films with large grains in a highly reproducible way. The resulting PSCs achieve a power conversion efficiency (PCE) of 24.3% (certified 23.9%) on small area (0.10 cm2 ), 24.0% (certified 23.7%) on large area (1 cm2 ) and 20.0% for minimodule (16 cm2 ), and maintain 90% of its initial efficiency after 1000 h 1-sun operation. The vacuum evaporation prevents advert environmental effects on lead halide formation and guarantees a reproducible fabrication of high-quality large-area perovskite films, which opens a promising way for large-scale fabrication of perovskite optoelectronics.
RESUMEN
Flexible perovskite solar cells (FPSCs) have emerged as power sources in versatile applications owing to their high-efficiency characteristics, excellent flexibility, and relatively low cost. Nevertheless, undesired strain in perovskite films greatly impacts the power-conversion efficiency (PCE) and stability of PSCs, particularly in FPSCs. Herein, a novel multifunctional organic salt, methylammonium succinate, which can alleviate strain and reinforce grain boundaries, was incorporated into the perovskite film, leading to relaxed microstrain and a lower defect concentration. As a result, a PCE of 25.4% for rigid PSCs and a record PCE of 23.6% (certified 22.5%) for FPSCs have been achieved. In addition, the corresponding FPSCs exhibited excellent bending durability, maintaining â¼85% of their initial efficiency after bending at a 6 mm radius for 10 000 cycles.
RESUMEN
Vacuum evaporation is promising for the high-throughput fabrication of perovskite solar cells (PSCs) because of its solvent-free characteristic, precise control of film thickness, and compatibility with large-scale production. Nevertheless, the power conversion efficiency (PCE) of PSCs fabricated by vacuum evaporation lags behind that of solution-processed PSCs. Here, we report a Cl-containing alloy-mediated sequential vacuum evaporation approach to fabricate perovskite films. The presence of Cl in the alloy facilitates organic ammonium halide diffusion and the subsequent perovskite conversion reaction, leading to homogeneous pinhole-free perovskite films with few defects. The resulting PSCs yield a PCE of 24.42%, 23.44% (certified 22.6%), and 19.87% for 0.1, 1.0, and 14.4 square centimeters (mini-module, aperture area), respectively. The unencapsulated PSCs show good stability with negligible decline in performance after storage in dry air for more than 4000 hours. Our method provides a reproducible approach for scalable fabrication of large-area, high-efficiency PSCs and other perovskite-based optoelectronics.
RESUMEN
Rice inflorescence meristem (IM) activity is essential for panicle development and grain production. How chromatin and epigenetic mechanisms regulate IM activity remains unclear. Genome-wide analysis revealed that in addition to genes involved in the vegetative to reproductive transition, many metabolic and protein synthetic genes were activated in IM compared with shoot apical meristem and that a change in the H3K27me3/H3K4me3 ratio was an important factor for the differential expression of many genes. Thousands of genes gained or lost H3K27me3 in IM, and downregulation of the H3K27 methyltransferase gene SET DOMAIN GROUP 711 (SDG711) or mutation of the H3K4 demethylase gene JMJ703 eliminated the increase of H3K27me3 in many genes. SDG711-mediated H3K27me3 repressed several important genes involved in IM activity and many genes that are silent in the IM but activated during floral organogenesis or other developmental stages. SDG711 overexpression augmented IM activity and increased panicle size; suppression of SDG711 by RNA interference had the opposite effect. Double knockdown/knockout of SDG711 and JMJ703 further reduced panicle size. These results suggest that SDG711 and JMJ703 have agonistic functions in reprogramming the H3K27me3/H3K4me3 ratio and modulating gene expression in the IM.