RESUMEN

The objective of this study is to analyze environmental genetic selection signals in large-scale sheep populations with conflicting environmental adaptations, aiming to identify and isolate genes associated with environmental adaptations in sheep populations. Kirghiz sheep, which inhabit high-altitude environments year-round, demonstrate the ability to adapt to extreme conditions. In this study, 42 Kirghiz sheep, 24 Tien-Shan in Kyrgyzstan sheep, 189 Qira black sheep, and 160 Chinese Merino sheep were genotyped using Illumina Ovine SNP50K chip. Regions exhibiting a selection signal threshold of 5%, as well as PI analysis and haplotype statistical scanning gene data were annotated, and intersecting genes were identified as candidate genes. Through Fst and haplotype statistical analysis revealed the key gene PDGFD and its vicinity's impact on fat deposition in sheep tails. Additionally, Fst and PI analysis uncovered genes related to high-altitude adaptation as well as those linked to animal growth and reproduction.Further GO and KEGG enrichment pathway analyses unveiled pathways associated with high-altitude adaptation such as negative regulation of peptidyl-tyrosine phosphorylation and xenobiotic metabolism processes.This investigation into the adaptability of Kirghiz sheep provides theoretical support and practical guidance for the conservation and genetic enhancement of Kirghiz sheep germplasm resources.

RESUMEN

C-H Functionalization of pyridines is an efficient strategy to access pyridine derivatives occurring in pharmaceuticals, agrochemicals, and materials. Nucleophilic additions to pyridiniums via both ionic and radical species have proven particularly useful. However, these reactions suffer from poor regioselectivity. By identifying an enzyme-mimic pocket-type urea activation reagent, we report a general platform for pyridine C-4 functionalization. Both ionic and radical nucleophiles can be incorporated to achieve the alkylation and arylation. Notably, the highly regioselective C-4 radical arylation is disclosed for the first time. The broad scope of nucleophiles and pyridines renders this platform applicable to the late-stage functionalization of drug-like molecules and the preparation of complex biologically important molecules.

RESUMEN

Regional analgesia based on the local anesthetic ropivacaine plays a crucial role in postoperative pain management and recovery; however, the short duration of analgesia limits its clinical potential. Various drug delivery systems such as microparticles and lipid carriers have been used to prolong the analgesic effect, yet most of them are prone to abrupt release from the site of administration or have poor analgesic effects of less than 48 h, which fail to meet the needs of postoperative analgesia. In this study, a low-molecular-weight gelator sodium deoxycholate-based hydrogel loaded with ropivacaine (DC-ROP gel) was designed for long-acting analgesia. The noncovalent interaction between ropivacaine and sodium deoxycholate helps to improve the stability and sustained release performance of the gel. This internal drug-binding hydrogel also avoids experiencing the burst release effect commonly seen in polymer hydrogels previously reported for the slow release of local anesthetics. DC-ROP gel exhibited the dual advantages of self-healing after compression and long-term controlled release. In mice with inflammatory pain, DC-ROP gel achieved peripheral nerve block for more than 1 week after a single injection. Histological and blood biochemical analyses confirmed that the DC-ROP gel did not produce systemic toxicity, and cytotoxicity experiments demonstrated that the DC-ROP gel resulted in low irritation. These results suggest that DC-ROP gel provides a promising strategy for local anesthetics in long-term postoperative pain management, broadening the potential of bile salt-based low-molecular-weight hydrogels for drug delivery.

Asunto(s)

RESUMEN

Purpose: Sleep disorders are common globally. Probiotics may improve human microbial diversity, offering potential benefits for sleep disturbances by enhancing sleep quality and reducing disorders. We aimed to use a population-based study to investigate the association between yogurt (a probiotic food) and probiotic consumption with sleep disturbances in US adults. Methods: A total of 49,693 adults from the 2009-2018 National Health and Nutrition Examination Survey (NHANES) were included in the analyses. Sleep disorders and sleep duration were assessed according to the Sleep Disorders Questionnaire. The Dietary Questionnaire evaluated yogurt and dietary supplements containing probiotic consumption. After adjusting for confounding factors, weighted multivariable logistic regression and subgroup analyses were used to assess the association between yogurt and probiotic consumption and sleep status. Results: Of the study cohort, 3535 (14.24 %) participants consumed yogurt and/or dietary supplements containing probiotics. The prevalence of sleep disorders was 16.22 %. Only 53.51 % of the participants achieved the recommended amount of sleep (7-9 h), with 6.10 % and 33.48 % having excessive and insufficient sleep duration, respectively. Weighted Logistic regression models indicated a significant association of probiotic intake with a decreased risk of sleep disturbances compared with those without yogurt or probiotic consumption after adjustments. (For sleep disorders: OR: 0.96, 95 % CI 0.94-0.98, P < 0.001; for sleep duration: OR: 0.98, 95 % CI 0.96-1.00, P = 0.081) Moreover, the effect size of the probiotic intake on sleep was especially significant in sex, race, and BMI subgroups. Conclusion: The present study first indicated that yogurt and probiotic consumption were associated with a reduced risk of sleep disturbances in US adults, particularly among males, whites, and those with a normal BMI. Incorporating yogurt or probiotics into the diet could serve as a public health strategy for improving sleep disturbances, though further investigation into the underlying mechanisms is needed.

RESUMEN

Analyzing the genetic diversity and selection characteristics of sheep (Ovis aries) holds significant value in understanding their environmental adaptability, enhancing breeding efficiency, and achieving effective conservation and rational utilization of genetic resources. In this study, we utilized Illumina Ovine SNP 50 K BeadChip data from four indigenous sheep breeds from the southern margin of the Taklamakan Desert (Duolang sheep: n = 36, Hetian sheep: n = 74, Kunlun sheep: n = 27, Qira black sheep: n = 178) and three foreign meat sheep breeds (Poll Dorset sheep: n = 105, Suffolk sheep: n = 153, Texel sheep: n = 150) to investigate the population structure, genetic diversity, and genomic signals of positive selection within the indigenous sheep. According to the Principal component analysis (PCA), the Neighbor-Joining tree (NJ tree), and Admixture, we revealed distinct clustering patterns of these seven sheep breeds based on their geographical distribution. Then used Cross Population Extended Haplotype Homozygosity (XP-EHH), Fixation Index (FST), and Integrated Haplotype Score (iHS), we identified a collective set of 32 overlapping genes under positive selection across four indigenous sheep breeds. These genes are associated with wool follicle development and wool traits, desert environmental adaptability, disease resistance, reproduction, and high-altitude adaptability. This study reveals the population structure and genomic selection characteristics in the extreme desert environments of native sheep breeds from the southern edge of the Taklimakan Desert, providing new insights into the conservation and sustainable use of indigenous sheep genetic resources in extreme environments. Additionally, these findings offer valuable genetic resources for sheep and other mammals to adapt to global climate change.

Asunto(s)

RESUMEN

Increasing the number of teats in sheep helps to improve the survival rate of sheep lambs after birth. In order to analyze the candidate genes related to the formation of multiple teats in Hu sheep, the present study was conducted to investigate the genetic pattern of multiple teats in Hu sheep. In this study, based on genome-wide data from 157 Hu sheep, Fst, xp-EHH, Pi and iHS signaling were performed, and the top 5% signal regions of each analyzed result were annotated based on the Oar_v4.0 for sheep. The results show that a total of 142 SNP loci were selected. We found that PTPRG, TMEM117 and LRP1B genes were closely associated with polypodium formation in Hu sheep, in addition, among the candidate genes related to polypodium we found genes such as TMEM117, SLC25A21 and NCKAP5 related to milk traits. The present study screened out candidate genes for the formation of multiple teats at the genomic level in Hu sheep.

Asunto(s)

RESUMEN

In practical operating conditions, the lithium deposition behavior is often influenced by multiple coupled factors and there is also a lack of comprehensive and long-term validation for dendrite suppression strategies. Our group previously proposed an intermittent lithiophilic model for high-performance three-dimensional (3D) composite lithium metal anode (LMA), however, the electrodeposition behavior was not discussed. To verify this model, this paper presents a modified 3D carbon cloth (CC) backbone by incorporating NiFe2O4/Fe2O3 (NFFO) nanoparticles derived from bimetallic NiFe-MOFs. Enhanced Li adsorption capacity and lithiophilic modulation were achieved by bimetallic MOFs-derivatives which prompted faster and more homogeneous Li deposition. The intermittent model was further verified in conjunction with the density functional theory (DFT) calculations and electrodeposition behaviors. As a result, the obtained Li-CC@NFFO||Li-CC@NFFO symmetric batteries exhibit prolonged lifespan and low hysteresis voltage even under ultra-high current and capacity conditions (5 mA cm-2, 10 mAh cm-2), what's more, the full battery coupled with a high mass loading (9 mg cm-2) of LiFePO4 cathode can be cycled at a high rate of 5 C, the capacity retention is up to 95.2 % before 700 cycles. This work is of great significance to understand the evolution of lithium dendrites on the 3D intermittent lithiophilic frameworks.

RESUMEN

Heterogeneous interface and defect engineering offer effective pathways to accelerate oxygen evolution reaction (OER) charge transfer kinetics and motivate optimal intrinsic catalytic activity. Herein, we report the lattice-matched NiO/NiFe2O4 heterostructure with ample oxygen vacancies (Vo-NiO/NiFe2O4) induced by a feasible hydrothermal followed by calcination and plasma-engraving assistant technique, which shows the unique porous microflower arrangement of intertwined nanosheets. Benefitting from the synergetic effects between lattice-matched heterointerface and oxygen vacancies induce the strong electronic coupling, optimized OH-/O2 diffusion pathway and ample active sites, thus-prepared Vo-NiO/NiFe2O4 presents a favorable OER performance with a low overpotential (261 mV @ 10 mA cm-2) and small Tafel slope (39.4 mV dec-1), even surpassing commercial RuO2 catalyst. Additionally, the two-electrode configuration water electrolyzer and rechargeable zinc-air battery assembled by Vo-NiO/NiFe2O4 catalyst show the potential practical application directions. This work provides an innovative avenue for strengthening OER performance toward water electrolysis and Zn-air batteries via the interface and vacancy engineering strategy.

RESUMEN

Lithium-oxygen batteries (LOBs) with a theoretical energy density of up to 3500 Wh kg-1 hold a promise for the next-generation high-energy-density batteries. However, the slow oxygen reduction/evolution kinetics at the cathode limits the performance of Li-air batteries. The rational design of efficient catalysts is essential for the improvement of oxygen electrode reaction kinetics. Herein, we report a facile strategy to co-dope N and P atoms simultaneously into Ti3C2Tx (NP-Ti3C2Tx) MXene via an electrostatic self-assembly approach. The co-doped NP-Ti3C2Tx layers expose abundant active sites, providing more space for accommodating the formed Li2O2. Moreover, the N and P co-doping facilitates efficient electron transport in Ti3C2Tx MXene. The LOB with NP-Ti3C2TX catalyst delivers a high discharge capacity of 24,940 mAh/g at 1000 mA g-1. At a cut-off capacity of 1000 mAh/g, this battery runs continuously for 159, 276, 185, and 229 cycles at current densities of 1000, 2000, 3000, and 5000 mA g-1, respectively. Theoretical calculations unveil that N and P co-doping enables lower ηORR and ηOER of only 0.26 V and 0.13 V on Ti3C2Tx MXene, respectively. This work offers a feasible approach for constructing efficient MXene electrocatalysts for Li-air batteries.

RESUMEN

The proton exchange membrane (PEM) fuel cell is a device that demonstrates a significant potential for environmental sustainability, since it efficiently converts chemical energy into electrical energy. The microporous layer (MPL) in PEM fuel cells promotes gas transport and eliminates water. Nevertheless, the power density of PEM fuel cells is restricted by ohmic losses and mass transport losses in conventional MPLs. In this study, we enhanced the power density of proton exchange membrane (PEM) fuel cells through the identification of appropriate materials and the mitigation of mass transport losses occurring at the interface between the microporous layer and the catalyst layer. The incorporation of high electron conductivity, slip behavior at the interface between graphene and water, and rapid water evaporation facilitated by nanoporous graphene effectively address transport-related challenges. We evaluated two types of graphene as potential substitutes for carbon black in the microporous layer (MPL). The enhanced power density (up to 1.1 W cm-2) under all humidity conditions and reduced mass transport resistance (a 75 % reduction compared to carbon black MPL) make them promising candidates for next-generation PEM fuel cells. Furthermore, these findings provide guidance for controlling interfacial mass transport in colloidal systems.

RESUMEN

[This corrects the article DOI: 10.3389/fgene.2023.1281601.].

RESUMEN

The objective of this research was to develop highly effective conductive polymer composite (CPC) materials for flexible piezoresistive sensors, utilizing hollow three-dimensional graphitic shells as a highly conductive particulate component. Polystyrene (PS), a cost-effective and robust polymer widely used in various applications such as household appliances, electronics, automotive parts, packaging, and thermal insulation materials, was chosen as the polymer matrix. The hollow spherical three-dimensional graphitic shells (GS) were synthesized through chemical vapor deposition (CVD) with magnesium oxide (MgO) nanoparticles serving as a support, which was removed post-synthesis and employed as the conductive filler. Commercial multi-walled carbon nanotubes (CNTs) were used as a reference one-dimensional graphene material. The main focus of this study was to investigate the impact of the GS on the piezoresistive response of carbon/polymer composite thin films. The distribution and arrangement of GS and CNTs in the polymer matrix were analyzed using techniques such as X-ray diffraction and scanning electron microscopy, while the electrical, thermal, and mechanical properties of the composites were also evaluated. The results revealed that the PS composite films filled with GS exhibited a more pronounced piezoresistive response as compared to the CNT-based composites, despite their lower mechanical and thermal performance.

RESUMEN

Local sheep in the northeastern Tarim Basin can adapt to dry and low-rainfall regional environments. In this study, three local sheep breeds in the northeastern Tarim Basin, LOP (LOP) sheep, Bayinbuluke (BYK) sheep, and Kunlun (KUN, also known as the Qiemo sheep) sheep, and three introduced sheep breeds, Suffolk (SUF) sheep, Dorset (APD) sheep, and Texel (TEX) sheep, were analyzed for genetic diversity, population structure, and selective signature using the Illumina OvineSNP50K BeadChip. We found that LOP, BYK, and KUN had lower observed heterozygosity and expected heterozygosity than TEX, SUF, and ADP, which were differentiated based on geographic distribution. We performed fixation index (FST) analysis on three local sheep breeds in the northeastern Tarim Basin (LOP, BYK, and KUN) and introduced sheep breeds (TEX, SUF, and ADP) to measure genetic differentiation. Nucleotide diversity (PI) analysis was performed on single-nucleotide polymorphism (SNP) data of LOP, BYK, and KUN. A total of 493 candidate genes were obtained by taking the intersection at a threshold of 5%. Among them, SMAD2, ESR2, and HAS2 were related to reproductive traits. PCDH15, TLE4, and TFAP2B were related to growth traits. SOD1, TSHR, and DNAJB5 were related to desert environmental adaptation. Analyzing the genetic patterns of local sheep in the northeastern Tarim Basin can protect the germplasm resources of local sheep and promote the development and utilization of sheep genetic resources.

RESUMEN

Maladaptive repair of acute kidney injury (AKI) is associated with a high risk of developing chronic kidney disease deemed irremediable even in present days. When AKI arises from ischemia-reperfusion injury, hypoxia usually plays a major role. Although both hypoxia-inducible factor-1α (HIF-1α) and yes-associated protein (YAP) have been proven to promote renal cell survival under hypoxia, there is a lack of research that studies the crosstalk of the two and its effect on kidney repair. In studying the crosstalk, CoCl2 was used to create a mimetic hypoxic environment. Immunoprecipitation and proximity ligation assays were performed to verify protein interactions. The results show that HIF-1α interacts with YAP and promotes nuclear translocation of YAP at a high cell density under hypoxic conditions, suggesting HIF-1α serves as a direct carrier that enables YAP nuclear translocation. This is the first study to identify HIF-1α as a crucial pathway for YAP nuclear translocation under hypoxic conditions. Once translocated into a nucleus, YAP protects cells from DNA damage and apoptosis under hypoxic conditions. Since it is unlikely for YAP to translocate into a nucleus without HIF-1α, any treatment that fosters the crosstalk between the two holds the potential to improve cell recovery from hypoxic insults.

RESUMEN

Sheep are important livestock animals that have evolved under various ecological pressures. Xinjiang is a region with diverse and harsh environments that have shaped many local sheep breeds with unique characteristics and environmental adaptability. However, these breeds are losing ecological flexibility due to the promotion of intensive farming practices. Here we sequenced 14 local sheep breeds from Xinjiang and analyzed their genetic structure and gene flow with other sheep breeds from neighboring regions. The Tibetan Plateau was the geographic origin of Xinjiang native sheep evolution. We performed genome-environment association analysis and identified Bio9: Mean Temperature of Driest Quarter and Bio15: Precipitation Seasonality as the key environmental factors affecting Xinjiang local sheep and the key genes involved in their survival and adaptation. We classified Xinjiang native sheep breeds into six groups based on their differential genes by pairwise selective sweep analysis and Community Network Analysis. We analyzed transcriptome expression data of 832 sheep tissues and detected tissue-specific enrichment of six group-specific genes in different biological systems. Our results revealed the genetic basis of year-round estrus, drought tolerance, hypoxia resistance, and cold tolerance traits of Xinjiang sheep breeds. Moreover, we proposed conservation strategies for Xinjiang local sheep breeds and provided theoretical guidance for breeding new sheep breeds under global extreme environments.

Asunto(s)

RESUMEN

Peony seeds, an important oil resource, have been attracting much attention because of α-linolenic acid. Oil bodies (OBs), naturally pre-emulsified oils, have great potential applications in the food industry. This study investigated the effects of extraction pH and Quillaja saponin (QS) on the physicochemical properties of peony oil body (POB) emulsions. POBs were extracted from raw peony milk at pH 4.0, 5.0, 6.0, and 7.0 (named pH 4.0-, 5.0-, 6.0-, and 7.0-POBs). All POBs contained extrinsic proteins and oleosins. The extrinsic proteins of pH 4.0- and pH 5.0-POB were 23 kDa and 38 kDa glycoproteins, the unknown proteins were 48 kDa and 60 kDa, while the 48 kDa and 38 kDa proteins were completely removed under the extraction condition of pH 6.0 and 7.0. The percentage of extrinsic proteins gradually decreased from 78.4% at pH 4.0-POB to 33.88% at pH 7.0-POB, while oleosin contents increased. The particle size and zeta potential of the POB emulsions decreased, whereas the oxidative stability, storage stability, and pI increased with the increasing extraction pH. QS (0.05~0.3%) increased the negative charges of all the POB emulsions, and 0.1% QS significantly improved the dispersion, storage, and the oxidative stability of the POB emulsions. This study provides guidance for selecting the proper conditions for the aqueous extraction of POBs and improving the stability of OB emulsions.

RESUMEN

Proton exchange membrane (PEM) fuel cells are a promising and environmentally friendly device to directly convert hydrogen energy into electric energy. However, water flooding and gas transport losses degrade its power density owing to structural issues (cracks, roughness, etc.) of the microporous layer (MPL). Here, we introduce a green material, supercritical fluid exfoliated graphene (s-Gr), to act as a network to effectively improve gas transport and water management. The assembled PEM fuel cell achieves a power density of 1.12 W cm-2. This improved performance is attributed to the reduction of cracks and the slip of water and gas on the s-Gr surface, in great contrast to the nonslip behavior on carbon black (CB). These findings open up an avenue to solve the water and gas transport problem in porous media by materials design with low friction and provide a new opportunity to boost high power density PEM fuel cells.

RESUMEN

BACKGROUND: The lung microbiome plays a crucial role in human health and disease. Extensive studies have demonstrated that the disturbance of the lung microbiome influences immune response, cognition, and behavior. The goal of this study was to investigate the effect of general anesthetics on lung microbiome. METHODS: Eight-week-old male SD rats received a continuous intravenous infusion of propofol or inhalation of isoflurane for 4 h. 16S rRNA gene amplification from BALF samples was used to investigate the changes in the lung microbiome after interventions. We further performed neurobehavioral assessments to find the differential strains' association with behavior disorder after isoflurane anesthesia. RESULTS: The absolute and relative quantitation of 16S rRNA sequencing data showed that isoflurane altered the diversity and abundance of the lung microbiome in rats more than propofol. Elusimicrobia increased significantly in the isoflurane group. Both EPM and OFT results showed that rats exhibited depression-like behaviors after inhalation of isoflurane. In addition, significant differences were found in the COG/KO/MetaCyc/KEGG pathway enrichment analyses among the groups. CONCLUSION: Continuous inhalation of isoflurane changed the diversity and composition of the lung microbiota in rats, resulting in post-anesthesia depression.

Asunto(s)

RESUMEN

Controllable construction and manipulation of artificial multi-compartmental structures are crucial in understanding and imitating smart molecular elements such as biological cells and on-demand delivery systems. Here, we report a liquid crystal droplet (LCD) based three-dimensional system for controllable and reversible ingestion and release of guest aqueous droplets (GADs). Induced by interfacial thermodynamic fluctuation and internal topological defect, microscale LCDs with perpendicular anchoring condition at the interface would spontaneously ingest external components from the surroundings and transform them as radially assembled tiny GADs inside LCDs. Landau-de Gennes free-energy model is applied to describe and explain the assembly dynamics and morphologies of these tiny GADs, which presents a good agreement with experimental observations. Furthermore, the release of these ingested GADs can be actively triggered by changing the anchoring conditions at the interface of LCDs. Since those ingestion and release processes are controllable and happen very gently at room temperature and neutral pH environment without extra energy input, these microscale LCDs are very prospective to provide a unique and viable route for constructing hierarchical 3D structures with tunable components and compartments.

RESUMEN

Developing improved anode materials is critical to the performance enhancement and the lifespan prolonging of sodium-ion batteries (SIBs). In this context, carbon-based nanostructures have emerged as a promising candidate. In this work, we have synthesized N, B, and P tri-doped carbon (NBPC) spheres using a one-step carbonization method. The as-prepared NBPC exhibits exceptional properties, including an expanded layer space, sufficient structural defects, and enhanced electrical conductivity. These characteristics synergistically contribute to the remarkable rate capability and ultra-long lifespan when NBPC is employed as an anode material for SIBs. The as-prepared NBPC demonstrates a reversible capacity of 290.6 mAh/g at 0.05 A/g, with a capacity retention of 98.4% after 800 cycles. Furthermore, NBPC exhibits an impressively ultra-long cycle life of 2400 cycles at 1.0 A/g with a reversible capacity of 140.2 mAh/g. First principle calculations confirm that the introduction of N, B, and P heteroatoms in carbon enhances the binding strength of sodium ions within NBPC. This work presents a novel approach for fabricating advanced anode materials, enabling the development of long-life SIBs for practical applications.