RESUMEN
The current study focuses on the production and experimental examination of sandwich beams consisting of an aluminum face sheet and 3D-printed honeycomb cores that are filled with magnetorheological elastomer (MRE). These cores are loaded with different ratios of (75/25)% and (50/50)% elastomer and magnetic particles, measured by weight. In order to ascertain the dynamic characteristics of sandwich beams, the constructed specimens were subjected to classic shock (free vibration) experiments, and these experiments were conducted under two conditions: with and without the application of a changing magnetic field at the free end and center of the beam. The results of the experiments suggest that the attenuation of the damping ratio exhibited satisfactory performance, particularly with respect to the structures that were being examined. The sandwich beam constructions proposed exhibited the ability to alter the damping ratio, damping coefficient, and stiffness through the application of a magnetic field. Nevertheless, an escalation in the applied magnetic field resulted in a reduction in stiffness values, while the values of the damping ratio and damping coefficient increased. Furthermore, significant variations in damping were observed when the magnets were located in the central regions of the structures.
RESUMEN
In this study, the quasi-static compression performance of tapered tubes was investigated using finite element simulations. Previous studies have shown that a thickness gradient can reduce the initial peak force and that lateral corrugation can increase the energy absorption performance. Therefore, two kinds of lateral corrugated tapered tubes with variable thicknesses were designed, and their deformation patterns, load displacement curves, and energy absorption performance were analyzed. The results showed that when the thickness variation factor (k) was 0.9, 1.2, and 1.5, the deformation mode of the single corrugated tapered tube (ST) changed from transverse expansion and contraction to axial progressive folding. In addition, the thickness gradient design improved the energy absorption performance of the ST. The energy absorption (EA) and specific energy absorption (SEA) of the model with k = 1.5 increased by 53.6% and 52.4%, respectively, compared with the ST model with k = 0. The EA and SEA of the double corrugated tapered tube (DT) increased by 373% and 95.7%, respectively, compared with the conical tube. The increase in the k value resulted in a significant decrease in the peak crushing force of the tubes and an increase in the crushing force efficiency.