RESUMEN
Inefficient flotation of bastnaesite remains a challenge in the production of rare earth elements. This study aimed to investigate the dissolution and adsorption behaviour of species that are commonly released into bastnaesite flotation pulp from Ca/Ba-bearing gangue minerals. The influence and corresponding mechanisms on the bastnaesite mineral surface and collectors, namely sodium oleate (NaOL), were evaluated experimentally based on micro-flotation, zeta potentials, in situ attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and X-Ray photoelectron spectroscopy (XPS) analyses. The flotation recovery of bastnaesite significantly decreased from â¼95% to â¼25%, â¼15%, â¼80%, â¼25% when exposed to calcite, fluorite, barite, and mixed dissolved species, respectively. The zeta potential of bastnaesite was pH sensitive, indicating that H+ and OH- determine the surface potential of bastnaesite. Solution chemistry analyses revealed that the presence of the dissolved species differed at various pH values. In situ ATR-FTIR demonstrated the different effects of the dissolved species from calcite, fluorite, and barite on collector adsorption. The former two dissolved species mainly depressed the chemisorption of the NaOL monomers (RCOOâ), whereas calcite also affected the physical adsorption of the oleic acid molecular dimer (RCOOH·RCOOâ). Moreover, the barite dissolved species only affected the physical adsorption of the NaOL species. The results of XPS analysis revealed that dissolved species from these three gangues could pre-adsorbed onto bastnaesite and affected the interaction with the collector. Density functional theory calculations were employed to provide further theoretical insights into the interactions between the dissolved species from calcite, fluorite, and barite and NaOL.
RESUMEN
Herein, we investigated the effects of mixed collectors with varying alkyl chain lengths and ligand types on the hydrophobicity of the spodumene-feldspar flotation system. Various collector-mineral interactions were compared using in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy with two-dimensional correlation spectroscopy (2D-COS), in situ microcalorimetry, and X-ray photoelectron spectroscopy (XPS). The highest flotation separation performance can be achieved at a molar ratio of 6:1 and pH 8-9. The in situ microcalorimetry results revealed that the difference in the adsorption reaction heat of the mixed collector is larger than that of the single anionic collector. Moreover, the inconformity between the magnitude of adsorption reaction heat and the results observed for flotation recovery indicates that the heat of the reaction presumably involves the adsorption configurations of the collectors and the amounts adsorbed. In in situ ATR-FTIR with 2D-COS, it can be observed that octanohydroxamic acid/dodecylamine (OHA/DDA) is adsorbed much more intensely onto feldspar than onto spodumene due to the availability of more space on feldspar for the subsequent sorption of DDA after the prior bidentate chemisorption of OHA under alkaline conditions, whereas the sodium oleate (NaOL)/DDA adsorption sequence at pH 4-5 was the reverse of that at pH 8-9. Lastly, XPS was employed to provide further supplemental evidence for the bonding between these two minerals and single anionic/mixed collectors at the optimal pH of 8-9. In this study, the powerful in situ detection technologies can establish a new platform for exploring the underlying mechanism of new reagents at the solid-liquid interface. Moreover, the in-depth understanding related to the adsorption behavior of the mixed collector is beneficial for facilitating the selection and design of efficient and environmentally friendly flotation collectors with improved selectivity.
RESUMEN
In this study, we used flotation tests, Fourier transform infrared spectroscopy (FTIR), zeta potential, X-ray photoelectron spectroscopy (XPS), and microcalorimetry measurements to investigate the flotation and possible adsorption mechanisms of the ilmenite surface before and after ultrasonic pre-treatment. Flotation results show that under optimum conditions, the promotion effect of sonication on ilmenite is remarkable. The maximum recovery is 89.54% for ultrasonicated ilmenite at a pH of 4-5. For pH of 8-9, recovery increased again to 66.34%. Microcalorimetry indicates that the adsorption-driven heat release (-Qads) is higher for ultrasonicated ilmenite than for raw one. After pre-treatment, the iso-electric point (IEP) changed from pH 6.2 to pH 4.2. FTIR spectra and zeta potential measurements indicated that metal ions as active sites on the ilmenite surface are probably changed by the ultrasonic treatment. XPS analysis shows that ultrasonic treatment can promotes the oxidation of Fe2+ to Fe3+ and improves the solubilization of Ca2+ and Mg2+ in the pH range of 4-5. Under weakly alkaline condition, ultrasound also can make Ca2+ and Mg2+ re-absorb onto the ilmenite surface as main active sites.
RESUMEN
Anisotropic surface properties of minerals play an important role in a variety of fields. With a focus on the two most intensively investigated silicate minerals (i.e., phyllosilicate minerals and pegmatite aluminosilicate minerals), this review highlights the research on their anisotropic surface properties based on their crystal structures. Four surface features comprise the anisotropic surface chemistry of minerals: broken bonds, energy, wettability, and charge. Analysis of surface broken bond and energy anisotropy helps to explain the cleavage and growth properties of mineral crystals, and understanding surface wettability and charge anisotropy is critical to the analysis of minerals' solution behavior, such as their flotation performance and rheological properties. In a specific reaction, the anisotropic surface properties of minerals are reflected in the adsorption strengths of reagents on different mineral surfaces. Combined with the knowledge of mineral crushing and grinding, a thorough understanding of the anisotropic surface chemistry properties and the anisotropic adsorption behavior of minerals will lead to the development of effective relational models comprising their crystal structure, surface chemistry properties, and targeted reagent adsorption. Overall, such a comprehensive approach is expected to firmly establish the connection between selective cleavage of mineral crystals for desired surfaces and designing novel reagents selectively adsorbed on the mineral surfaces. As tools to characterize the anisotropic surface chemistry properties of minerals, DLVO theory, atomic force microscopy (AFM), and molecular dynamics (MD) simulations are also reviewed.
RESUMEN
The analysis of flotation and adsorption of mixed collectors on oxide and silicate minerals is of great importance for both industrial applications and theoretical research. Over the past years, significant progress has been achieved in understanding the adsorption of single collectors in micelles as well as at interfaces. By contrast, the self-assembly of mixed collectors at liquid/air and solid/liquid interfaces remains a developing area as a result of the complexity of the mixed systems involved and the limited availability of suitable analytical techniques. In this work, we systematically review the processes involved in the adsorption of mixed collectors onto micelles and at interface by examining four specific points, namely, theoretical background, factors that affect adsorption, analytical techniques, and self-assembly of mixed surfactants at the mineral/liquid interface. In the first part, the theoretical background of collector mixtures is introduced, together with several core solution theories, which are classified according to their application in the analysis of physicochemical properties of mixed collector systems. In the second part, we discuss the factors that can influence adsorption, including factors related to the structure of collectors and environmental conditions. We summarize their influence on the adsorption of mixed systems, with the objective to provide guidance on the progress achieved in this field to date. Advances in measurement techniques can greatly promote our understanding of adsorption processes. In the third part, therefore, modern techniques such as optical reflectometry, neutron scattering, neutron reflectometry, thermogravimetric analysis, fluorescence spectroscopy, ultrafiltration, atomic force microscopy, analytical ultracentrifugation, X-ray photoelectron spectroscopy, Vibrational Sum Frequency Generation Spectroscopy and molecular dynamics simulations are introduced in virtue of their application. Finally, focusing on oxide and silicate minerals, we review and summarize the flotation and adsorption of three most widely used mixed surfactant systems (anionic-cationic, anionic-nonionic, and cationic-nonionic) at the liquid/mineral interface in order to fully understand the self-assembly progress. In the end, the paper gives a brief future outlook of the possible development in the mixed surfactants.
RESUMEN
The anisotropic adsorption of sodium oleate (NaOL) on feldspar surfaces was investigated to elucidate the different flotation properties of feldspar particles of four different size ranges. Microflotation experiments showed that the feldspar flotation recovery of particles with sizes spanning different ranges decreased in the order 0-19>19-38>45-75>38-45µm. Zeta potential and FTIR measurements showed that NaOL was chemically adsorbed on the Al sites of the feldspar surface. The anisotropic surface energies and broken bond densities estimated by density functional theory calculations showed that, although feldspar mostly exposed (010) and (001) surfaces, only the (001) surfaces contained the Al sites needed for NaOL adsorption. The interaction energies calculated by molecular dynamics simulations confirmed the more favorable NaOL adsorption on (001) than (010) surfaces, which may represent the main cause for the anisotropic NaOL adsorption on feldspar particles of different sizes. SEM measurements showed that the main exposed surfaces on coarse and fine feldspar particles were the side (010) and basal (001) ones, respectively. A higher fraction of Al-rich (001) surfaces is exposed on fine feldspar particles, resulting in better floatability compared with coarse particles. XPS and adsorption measurements confirmed that the Al content on the feldspar surface varied with the particle size, explaining the different NaOL flotation of feldspar particles of different sizes. Therefore, the present results suggest that coarsely ground ore should be used for the separation of feldspar gangue minerals. Further improvements in the flotation separation of feldspar from associated valuable minerals can be achieved through selective comminution or grinding processes favoring the exposure of (010) surfaces.