RESUMEN

We have reviewed a paper titled "Bioaccumulation of Methyl Siloxanes in Common Carp (Cyprinus carpio) and in an Estuarine Food Web in Northeastern China" by Xue et al., which was published in the Archives of Environmental Contamination and Toxicology in 2019. In the paper, the authors presented and discussed the measured bioconcentration factors (BCFs), biomagnification factors (BMFs), and trophic magnification factors (TMFs) of selected volatile methylsiloxanes in Shuangtaizi estuary in China. Although we appreciate their efforts for sample collection and data analysis, we have identified significant errors in calculations of BCFs, TMFs, and BMFs, as well as animal welfare issues and food web trophic level assumptions. Based on the data, we have attempted to correct some of the analysis and offered a more complete and robust interpretation of the related data, when possible. Collectively, these errors would likely lead to very different conclusions than yours in the paper.

Asunto(s)

RESUMEN

European Union Directive 2013/39/EU, which amended and updated the Water Framework Directive (WFD; 2000/60/EC) and its daughter directive (2008/105/EC), sets Environmental Quality Standards for biota (EQSbiota ) for a number of bioaccumulative chemicals. These chemicals pose a threat to both aquatic wildlife and human health via the consumption of contaminated prey or the intake of contaminated food originating from the aquatic environment. EU member states will need to establish programs to monitor the concentration of 11 priority substances in biota and assess compliance against these new standards for the classification of surface water bodies. An EU-wide guidance effectively addresses the implementation of EQSbiota . Flexibility is allowed in the choice of target species used for monitoring to account for both diversity of habitats and aquatic community composition across Europe. According to that guidance, the consistency and comparability of monitoring data across member states should be enhanced by adjusting the data on biota contaminant concentrations to a standard trophic level by use of the appropriate trophic magnification factor (TMF), a metric of contaminant biomagnification through the food web. In this context, the selection of a TMF value for a given substance is a critical issue, because this field-derived measure of trophic magnification can show variability related to the characteristics of ecosystems, the biology and ecology of organisms, the experimental design, and the statistical methods used for TMF calculation. This paper provides general practical advice and guidance for the selection or determination of TMFs for reliable application within the context of the WFD (i.e., adjustment of monitoring data and EQS derivation). Based on a series of quality attributes for TMFs, a decision tree is presented to help end users select a reasonable and relevant TMF. Integr Environ Assess Manag 2019;15:266-277. © 2018 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Asunto(s)

RESUMEN

This study utilized probabilistic risk assessment techniques to compare field sediment concentrations of the cyclic volatile methylsiloxane (cVMS) materials octamethylcyclotetrasiloxane (D4, CAS # 556-67-2), decamethylcyclopentasiloxane (D5, CAS # 541-02-6), and dodecamethylcyclohexasiloxane (D6, CAS # 540-97-6) to effect levels for these compounds determined in laboratory chronic toxicity tests with benthic organisms. The concentration data for D4/D5/D6 in sediment were individually sorted and the 95th centile concentrations determined in sediment on an organic carbon (OC) fugacity basis. These concentrations were then compared to interpolated 5th centile benthic sediment no-observed effect concentration (NOEC) fugacity levels, calculated from a distribution of chronic D4/D5/D6 toxicologic assays per OECD guidelines using a variety of standard benthic species. The benthic invertebrate fugacity biota NOEC values were then compared to field-measured invertebrate biota fugacity levels to see if risk assessment evaluations were similar on a field sediment and field biota basis. No overlap was noted for D4 and D5 95th centile sediment and biota fugacity levels and their respective 5th centile benthic organism NOEC values. For D6, there was a small level of overlap at the exposure 95th centile sediment fugacity and the 5th centile benthic organism NOEC fugacity value; the sediment fugacities indicate that a negligible risk (1%) exists for benthic species exposed to D6. In contrast, there was no indication of risk when the field invertebrate exposure 95th centile biota fugacity and the 5th centile benthic organism NOEC fugacity values were compared.

Asunto(s)

RESUMEN

Critical factors (uptake, distribution, metabolism and elimination) for understanding the bioaccumulation/biomagnification potential of Octamethylcyclotetrasiloxane (D4) and Decamethylcyclopentasiloxane (D5) siloxanes in fish were investigated to address whether these chemicals meet the "B" criteria of the Persistent, Bioaccumulative, and Toxic (PBT) classification. A metabolism study was conducted in rainbow trout whereby a 15mg [14C]D4/kg bw or [14C]D5/kg bw as a single bolus oral dose was administered via gavage. Of the administered dose, 79% (D4) and 78% (D5) was recovered by the end of the study (96-h). Eighty-two percent and 25% of the recovered dose was absorbed based on the percentage of recovered dose in carcass (69% and 17%), tissues, bile and blood (12% and 8%) and urine (1%) for D4 and D5, respectively. A significant portion of the recovered dose (i.e. 18% for D4 and 75% for D5) was eliminated in feces. Maximum blood concentrations were 1.6 and 1.4µg D4 or D5/g blood at 24h post-dosing, with elimination half-lives of 39h (D4) and 70h (D5). Modeling of parent and metabolite blood concentrations resulted in estimated metabolism rate constants (km(blood)) of 0.15 (D4) and 0.17day-1(D5). Metabolites in tissues, bile, blood, and urine totaled a minimum of 2% (D4) and 14% (D5) of the absorbed dose. The highest concentration of 14C-activity in the fish following D4 administration was in mesenteric fat followed by bile, but the opposite was true for D5. Metabolites were not detected in fat, only parent chemical. In bile, 94% (D4) and 99% (D5) of the 14C-activity was due to metabolites. Metabolites were also detected in the digestive tract, liver and gonads. Approximately 40% of the 14C-activity detected in the liver was due to the presence of metabolites. Urinary elimination represented a minor pathway, but all the 14C-activity in the urine was associated with metabolites. Clearance may occur via enterohepatic circulation of metabolic products in bile with excretion via the digestive tract and urinary clearance of polar metabolites.

Asunto(s)

RESUMEN

Trophic magnification factors (TMFs) are field-based measurements of the bioaccumulation behavior of chemicals in food-webs. TMFs can provide valuable insights into the bioaccumulation behavior of chemicals. However, bioaccumulation metrics such as TMF may be subject to considerable uncertainty as a consequence of systematic bias and the influence of confounding variables. This study seeks to investigate the role of systematic bias resulting from spatially-variable concentrations in water and sediments and biotransformation rates on the determination of TMF. For this purpose, a multibox food-web bioaccumulation model was developed to account for spatial concentration differences and movement of organisms on chemical concentrations in aquatic biota and TMFs. Model calculated and reported field TMFs showed good agreement for persistent polychlorinated biphenyl (PCB) congeners and biotransformable phthalate esters (PEs) in a marine aquatic food-web. Model testing showed no systematic bias and good precision in the estimation of the TMF for PCB congeners but an apparent underestimation of model calculated TMFs, relative to reported field TMFs, for PEs. A model sensitivity analysis showed that sampling designs that ignore the presence of concentration gradients may cause systematically biased and misleading TMF values. The model demonstrates that field TMFs are most sensitive to concentration gradients and species migration patterns for substances that are subject to a low degree of biomagnification or trophic dilution. The model is useful in anticipating the effect of spatial concentration gradients on the determination of the TMF; guiding species collection strategies in TMF studies; and interpretation of the results of field bioaccumulation studies in study locations where spatial differences in chemical concentration exist.

Asunto(s)

RESUMEN

Many chemicals in commerce are classified as "superhydrophobic", having log octanol-water partition coefficients (log KOW) approaching or exceeding 7. Examples include long-chain alkanes, halogenated aromatics, and cyclic volatile methylsiloxanes (cVMS). We show that superhydrophobic chemicals present unique assessment challenges because of their sparing solubility in water and difficulties in empirical determinations of bioconcentration factors (BCFs) and aquatic toxicity. Using cVMS as an example, BCFs are considerably lower than expected due to biotransformation. Reviewed aquatic toxicity test data for cVMS in a range of aquatic organisms show little or no toxic effects up to solubility limits in water and sediment. Explanations for this apparent lack of toxicity of cVMS, and by extension to other superhydrophobic chemicals, are explored using a conventional one-compartment uptake model to simulate bioconcentration and toxicity tests using an assumed baseline narcotic critical body residue (CBR) and a range of organism sizes. Because of the low aqueous concentrations, equilibration times are very long and BCFs are sensitive to even very slow rates of biotransformation. Most organisms fail to achieve the assumed CBR during feasible test durations even at the solubility limit. Regulatory evaluation of superhydrophobic substances requires specially designed test protocols addressing biotransformation and dietary uptake.

Asunto(s)

RESUMEN

Decamethylpentacyclosiloxane (D5) is a widely used, high-production volume personal care product with an octanol-water partition coefficient (log K(OW)) of 8.09. Because of D5's high K(OW) and widespread use, it is subject to bioaccumulation assessments in many countries. The present study provides a compilation and an in-depth, independent review of bioaccumulation studies involving D5. The findings indicate that D5 exhibits depuration rates in fish and mammals that exceed those of extremely hydrophobic, nonbiotransformable substances; that D5 is subject to biotransformation in mammals and fish; that observed bioconcentration factors in fish range between 1040 L/kg and 4920 L/kg wet weight in laboratory studies using non-radiolabeled D5 and between 5900 L/kg and 13 700 L/kg wet weight in an experiment using C(14) radiolabeled D5; and that D5 was not observed to biomagnify in most laboratory experiments and field studies. Review of the available studies shows a high degree of internal consistency among findings from different studies and supports a broad comprehensive approach in bioaccumulation assessments that includes information from studies with a variety of designs and incorporates multiple bioaccumulation measures in addition to the K(OW) and bioconcentration factor.

Asunto(s)

RESUMEN

The environmental sources, fate, transport, and routes of exposure of decamethylcyclopentasiloxane (D5; CAS no. 541-02-6) are reviewed in the present study, with the objective of contributing to effective risk evaluation and assessment of this and related substances. The present review, which is part of a series of studies discussing aspects of an effective risk evaluation and assessment, was prompted in part by the findings of a Board of Review undertaken to comment on a decision by Environment Canada made in 2008 to subject D5 to regulation as a toxic substance. The present review focuses on the early stages of the assessment process and how information on D5's physical-chemical properties, uses, and fate in the environment can be integrated to give a quantitative description of fate and exposure that is consistent with available monitoring data. Emphasis is placed on long-range atmospheric transport and fate in water bodies receiving effluents from wastewater treatment plants (along with associated sediments) and soils receiving biosolids. The resulting exposure estimates form the basis for assessments of the resulting risk presented in other studies in this series. Recommendations are made for developing an improved process by which D5 and related substances can be evaluated effectively for risk to humans and the environment.

Asunto(s)

RESUMEN

As part of an initiative to evaluate commercial chemicals for their effects on human and environmental health, Canada recently evaluated decamethylcyclopentasiloxane (D5; CAS no. 541-02-06), a high-volume production chemical used in many personal care products. The evaluation illustrated the challenges encountered in environmental risk assessments and the need for the development of better tools to increase the weight of evidence in environmental risk assessments. The present study presents a new risk analysis method that applies thermodynamic principles of fugacity and activity to express the results of field monitoring and laboratory bioaccumulation and toxicity studies in a comprehensive risk analysis that can support risk assessments. Fugacity and activity ratios of D5 derived from bioaccumulation measures indicate that D5 does not biomagnify in food webs, likely because of biotransformation. The fugacity and activity analysis further demonstrates that reported no-observed-effect concentrations of D5 normally cannot occur in the environment. Observed fugacities and activities in the environment are, without exception, far below those corresponding with no observed effects, in many cases by several orders of magnitude. This analysis supports the conclusion of the Canadian Board of Review and the Minister of the Environment that D5 does not pose a danger to the environment. The present study further illustrates some of the limitations of a persistence-bioaccumulation-toxicity-type criteria-based risk assessment approach and discusses the merits of the fugacity and activity approach to increase the weight of evidence and consistency in environmental risk assessments of commercial chemicals.

Asunto(s)

RESUMEN

Decamethylcyclopentasiloxane (D5) is used in personal care products and industrial applications. The authors summarize the risks to the environment from D5 based on multiple lines of evidence and conclude that it presents negligible risk. Laboratory and field studies show that D5 is not toxic to aquatic organisms or benthic invertebrates up to its solubility limit in water or porewater or its sorptive capacity in sediment. Comparison of lipid-normalized internal concentrations with measured concentrations in benthos indicates that field-collected organisms do not achieve toxic levels of D5 in their tissues, suggesting negligible risk. Exposure to D5 resulted in a slight reduction of root biomass in barley at test concentrations 2 orders of magnitude greater than measured D5 levels in biosolids-amended soils and more than twice as high as the maximum calculated sorptive capacity of the soil. No effects were observed in soil invertebrates exposed to similar concentrations, indicating that D5 poses a de minimis risk to the terrestrial environment. High rates of metabolism and elimination of D5 compared with uptake rates from food results in biodilution in the food web rather than biomagnification, culminating in de minimis risk to higher trophic level organisms via the food chain. A fugacity approach substantiates all conclusions that were made on a concentration basis.

Asunto(s)

Asunto(s)

RESUMEN

Separate 77-d fish feeding studies were conducted on the cyclic volatile methylsiloxane (cVMS) chemicals octamethylcyclotetrasiloxane and decamethylcyclopentasiloxane with the rainbow trout, Oncorhynchus mykiss, with the determination of biomagnification factor (BMF) and lipid-adjusted BMF (BMF(L)) values as the final experimental metrics. The studies used fish food concentrations of ∼500µgg(-1) for exposure periods of 35d, followed by a depuration period of 42d with clean food. The fish tissue concentrations of D4 and D5 achieved empirical steady-state by day 21 in each study. By day 7 of exposure, total (14)C activity of both compounds had moved from the fish gastrointestinal (GI) tract into surrounding tissue. An absence of significant fish growth during the initial depuration phase allowed for measurement of empirical depuration rate constants (k2) independent of growth dilution for D4 and D5 of 0.035 and 0.040d(-1), respectively, corresponding to elimination half-lives of approximately 20d. These rate constants indicated that ∼70-75% of steady-state was achieved during exposure in both studies, resulting in empirical steady-state BMF and BMF(L) values of 0.28 and 0.66 for D4, respectively, and 0.32 and 0.85 for D5, respectively. Kinetic modeling using simple first-order uptake and depuration dynamics produced good agreement with experimental data, with D4 and D5 assimilation efficiencies of 40% and 44%, respectively. Growth-corrected depuration rate constants modeled over the entire study data set indicated slower elimination kinetics for D4 (k2 of 0.007d(-1) or half-life of 100d) compared to D5 (k2 of 0.010d(-1) or elimination half-life of 69d). Kinetic BMFk values (i.e., k1/k2) for D4 and D5 were 1.7 and 1.3, respectively, with lipid-adjusted BMFk(L) values of 4.0 and 3.4, respectively.

Asunto(s)

RESUMEN

Cyclic volatile methyl siloxanes (cVMS) are important consumer materials that are used in personal care products and industrial applications. These compounds have gained increased attention in recent years following the implementation of chemical legislation programs worldwide. Industry-wide research programs are being conducted to characterize the persistence, bioaccumulation, and toxicity (PBT) properties of cVMS materials. As part of this larger effort, a tissue-based risk assessment was performed to further inform the regulatory decision-making process. Measured tissue concentrations of cVMS compounds in fish and benthic invertebrates are compared with critical target lipid body burdens (CTLBBs) as estimated with the target lipid model (TLM) to evaluate risk. Acute and chronic toxicity data for cVMS compounds are compared with data for nonpolar organic chemicals to validate application of the TLM in this effort. The analysis was extended to estimate the contribution from metabolites to the overall cVMS-derived tissue residues using a food chain model calibrated to laboratory and field data. Concentrations of cVMS materials in biota from several trophic levels (e.g., invertebrates, fish) are well below the estimated CTLBBs associated with acute and chronic effects. This analysis, when combined with the limited biomagnification potential for cVMS compounds that was observed in the field, suggests that there is little risk of adverse effects from cVMS materials under present-day emission levels.

Asunto(s)

RESUMEN

Standardized laboratory protocols for measuring the accumulation of chemicals from sediments are used in assessing new and existing chemicals, evaluating navigational dredging materials, and establishing site-specific biota-sediment accumulation factors (BSAFs) for contaminated sediment sites. The BSAFs resulting from the testing protocols provide insight into the behavior and risks associated with individual chemicals. In addition to laboratory measurement, BSAFs can also be calculated from field data, including samples from studies using in situ exposure chambers and caging studies. The objective of this report is to compare and evaluate paired laboratory and field measurement of BSAFs and to evaluate the extent of their agreement. The peer-reviewed literature was searched for studies that conducted laboratory and field measurements of chemical bioaccumulation using the same or taxonomically related organisms. In addition, numerous Superfund and contaminated sediment site study reports were examined for relevant data. A limited number of studies were identified with paired laboratory and field measurements of BSAFs. BSAF comparisons were made between field-collected oligochaetes and the laboratory test organism Lumbriculus variegatus and field-collected bivalves and the laboratory test organisms Macoma nasuta and Corbicula fluminea. Our analysis suggests that laboratory BSAFs for the oligochaete L. variegatus are typically within a factor of 2 of the BSAFs for field-collected oligochaetes. Bivalve study results also suggest that laboratory BSAFs can provide reasonable estimates of field BSAF values if certain precautions are taken, such as ensuring that steady-state values are compared and that extrapolation among bivalve species is conducted with caution.

Asunto(s)

RESUMEN

An approach for comparing laboratory and field measures of bioaccumulation is presented to facilitate the interpretation of different sources of bioaccumulation data. Differences in numerical scales and units are eliminated by converting the data to dimensionless fugacity (or concentration-normalized) ratios. The approach expresses bioaccumulation metrics in terms of the equilibrium status of the chemical, with respect to a reference phase. When the fugacity ratios of the bioaccumulation metrics are plotted, the degree of variability within and across metrics is easily visualized for a given chemical because their numerical scales are the same for all endpoints. Fugacity ratios greater than 1 indicate an increase in chemical thermodynamic activity in organisms with respect to a reference phase (e.g., biomagnification). Fugacity ratios less than 1 indicate a decrease in chemical thermodynamic activity in organisms with respect to a reference phase (e.g., biodilution). This method provides a holistic, weight-of-evidence approach for assessing the biomagnification potential of individual chemicals because bioconcentration factors, bioaccumulation factors, biota-sediment accumulation factors, biomagnification factors, biota-suspended solids accumulation factors, and trophic magnification factors can be included in the evaluation. The approach is illustrated using a total 2393 measured data points from 171 reports, for 15 nonionic organic chemicals that were selected based on data availability, a range of physicochemical partitioning properties, and biotransformation rates. Laboratory and field fugacity ratios derived from the various bioaccumulation metrics were generally consistent in categorizing substances with respect to either an increased or decreased thermodynamic status in biota, i.e., biomagnification or biodilution, respectively. The proposed comparative bioaccumulation endpoint assessment method could therefore be considered for decision making in a chemicals management context.

Asunto(s)

RESUMEN

A primary consideration in the evaluation of chemicals is the potential for substances to be absorbed and retained in an organism's tissues (i.e., bioaccumulated) at concentrations sufficient to pose health concerns. Substances that exhibit properties that enable biomagnification in the food chain (i.e., amplification of tissue concentrations at successive trophic levels) are of particular concern due to the elevated long-term exposures these substances pose to higher trophic organisms, including humans. Historically, biomarkers of in vivo chemical exposure (e.g., eggshell thinning, bill deformities) retrospectively led to the identification of such compounds, which were later categorized as persistent organic pollutants. Today, multiple bioaccumulation metrics are available to quantitatively assess the bioaccumulation potential of new and existing chemicals and identify substances that, upon or before environmental release, may be characterized as persistent organic pollutants. This paper reviews the various in vivo measurement approaches that can be used to assess the bioaccumulation of chemicals in aquatic or terrestrial species using laboratory-exposed, field-deployed, or collected organisms. Important issues associated with laboratory measurements of bioaccumulation include appropriate test species selection, test chemical dosing methods, exposure duration, and chemical and statistical analyses. Measuring bioaccumulation at a particular field site requires consideration of which test species to use and whether to examine natural populations or to use field-deployed populations. Both laboratory and field methods also require reliable determination of chemical concentrations in exposure media of interest (i.e., water, sediment, food or prey, etc.), accumulated body residues, or both. The advantages and disadvantages of various laboratory and field bioaccumulation metrics for assessing biomagnification potential in aquatic or terrestrial food chains are discussed. Guidance is provided on how to consider the uncertainty in these metrics and develop a weight-of-evidence evaluation that supports technically sound and consistent persistent organic pollutant and persistent, bioaccumulative, and toxic chemical identification. Based on the bioaccumulation information shared in 8 draft risk profiles submitted for review under the United Nations Stockholm Convention, recommendations are given for the information that is most critical to aid transparency and consistency in decision making.

Asunto(s)

RESUMEN

Wild mink (Mustela vison) living along the Tittabawassee River in central Michigan exhibit elevated hepatic and dietary polychlorinated dibenzofuran (PCDF) concentrations exceeding mink-specific, literature-reported toxicity reference values (TRVs) on a toxicity equivalents basis. However, no apparent effects on individuals or population are evident, suggesting that available TRVs may overpredict risk for the site-specific mix of congeners. To investigate this discrepancy, a 180-day spiked feed study was conducted to assess: (1) the dosages of key congeners necessary to achieve liver concentrations bracketing those observed in wild mink, (2) time to achieve steady-state concentrations, and (3) effect of coadministration of 2,3,7,8-tetrachlorodibenzofuran (TCDF) and 2,3,4,7,8-pentachlorodibenzofuran (4-PeCDF) on the toxicokinetics and distribution of each congener. Adipose and hepatic PCDF concentrations were measured at 0, 90, and 180 days. PCDF concentrations in mink scat were determined at several time points and indicated nearly complete absorption of both TCDF and 4-PeCDF from the diet. Elimination half-times of TCDF were < 15 h and were inversely proportional to dose, while those for 4-PeCDF were approximately 7-9 days with no clear dose dependency in the tested dose range. Coadministration of 4-PeCDF and TCDF accelerated clearance of TCDF compared to administration of TCDF alone. Clearance of 4-PeCDF was not affected by TCDF coadministration. Distribution of 4-PeCDF, but not TCDF, demonstrated increased hepatic sequestration with increasing dose. 4-PeCDF toxicokinetics were described using a previously published two-compartment model. Overall, the toxicokinetic information gathered here illustrates the impact of CYP1A1 induction on bioaccumulation and toxicity potential of TCDF and 4-PeCDF. This information may provide insight into why the current TRVs do not appear to correctly characterize the risk for these two congeners when they are the primary components of an environmental mixture.

Asunto(s)

RESUMEN

This study was designed to experimentally measure the assimilation efficiency of hexachlorobenzene (HCB) in a warm-water, benthic-feeding fish species, the channel catfish (Ictalurus punctatus). Catfish were exposed to (14)C-radiolabeled HCB in catfish food over a 28-day exposure period, followed by a 14-day clearance period. Over the experimental period, the total (14)C residues were measured in fish tissue and a simple two-box kinetic model was applied to the data to simulate uptake and clearance dynamics. No detectable metabolism of HCB by catfish was found. A two-box kinetic model effectively modeled the uptake and clearance of (14)C-HCB in catfish, with a calculated assimilation efficiency of the chemical into the whole catfish of 67% (growth corrected). The growth-corrected pseudo first-order elimination half-life of (14)C-HCB from whole catfish was determined to be 29 days (k(2)=0.024 day(-1)).

Asunto(s)

RESUMEN

Currently, the laboratory-derived fish bioconcentration factor (BCF) serves as one of the primary data sources used to assess the potential for a chemical to bioaccumulate. Consequently, fish BCF values serve a central role in decision making and provide the basis for development of quantitative structure-property relationships (QSPRs) used to predict the bioaccumulation potential of untested compounds. However, practical guidance for critically reviewing experimental BCF studies is limited. This lack of transparent guidance hinders improvement in predictive models and can lead to uninformed chemical management decisions. To address this concern, a multiple-stakeholder workshop of experts from government, industry, and academia was convened by the International Life Sciences Institute Health and Environmental Sciences Institute to examine the data availability and quality issues associated with in vivo fish bioconcentration and bioaccumulation data. This paper provides guidance for evaluating key aspects of study design and conduct that must be considered when judging the reliability and adequacy of reported laboratory bioaccumulation data. Key criteria identified for judging study reliability include 1) clear specification of test substance and fish species investigated, 2) analysis of test substance in both fish tissue and exposure medium, 3) no significant adverse effects on exposed test fish, and 4) a reported test BCF that reflects steady-state conditions with unambiguous units. This guidance is then applied to 2 data-rich chemicals (anthracene and 2,3,7,8-tetrachlorodibenzo-p-dioxin) to illustrate the critical need for applying a systematic data quality assessment process. Use of these guidelines will foster development of more accurate QSPR models, improve the performance and reporting of future laboratory studies, and strengthen the technical basis for bioaccumulation assessment in chemicals management.

Asunto(s)

RESUMEN

Chemical management programs strive to protect human health and the environment by accurately identifying persistent, bioaccumulative, toxic substances and restricting their use in commerce. The advance of these programs is challenged by the reality that few empirical data are available for the tens of thousands of commercial substances that require evaluation. Therefore, most preliminary assessments rely on model predictions and data extrapolation. In November 2005, a workshop was held for experts from governments, industry, and academia to examine the availability and quality of in vivo fish bioconcentration and bioaccumulation data, and to propose steps to improve its prediction. The workshop focused on fish data because regulatory assessments predominantly focus on the bioconcentration of substances from water into fish, as measured using in vivo tests or predicted using computer models. In this article we review of the quantity, features, and public availability of bioconcentration, bioaccumulation, and biota-sediment accumulation data. The workshop revealed that there is significant overlap in the data contained within the various fish bioaccumulation data sources reviewed, and further, that no database contained all of the available fish bioaccumulation data. We believe that a majority of the available bioaccumulation data have been used in the development and testing of quantitative structure-activity relationships and computer models currently in use. Workshop recommendations included the publication of guidance on bioconcentration study quality, the combination of data from various sources to permit better access for modelers and assessors, and the review of chemical domains of existing models to identify areas for expansion.

Asunto(s)