RESUMEN

The gelation of milk proteins can be achieved by various means, enabling the development of diverse products. In this study, heat-set milk protein gels (15 % protein) of diverse textures were made by pH modulation and two gels were selected for dynamic in vitro gastric digestion: a spoonable soft gel (SG, pH 6.55' G' of ∼100 Pa) and a sliceable firm gel (FG, pH 5.65; G' of ∼7000 Pa). The two gels displayed markedly different structural changes and digestion kinetics during gastric digestion. The SG underwent substantial structural compaction during the first 120 min of gastric digestion into a denser and firmer gastric chyme (26.3 % crude protein, G* of ∼8500 Pa) than the chyme of the FG (15.7 % crude protein, G* of ∼3000 Pa). These contrasting intragastric structural changes of the gels reversed their original textural differences, which led to slower digestion and gastric emptying of proteins from the SG compared with the FG. The different intragastric pH profiles during the digestion of the two gels likely played a key role by modulating the proteolytic activity and specificity (to κ-casein) of pepsin. Preferential early cleavage of κ-casein in SG stimulated coagulation and compaction of solid chyme, whereas rapid hydrolysis of αS- and ß-caseins in the FG weakened coagulation. This study provided new insights into controlling the structural development of dairy-based foods during gastric digestion and modulating digestion kinetics.

Asunto(s)

RESUMEN

The objectives of this study were to estimate genetic parameters for citric acid content (CA) and lactic acid content (LA) in sheep milk and to identify the associated candidate genes in a New Zealand dairy sheep flock. Records from 165 ewes were used. Heritability estimates based on pedigree records for CA and LA were 0.65 and 0.33, respectively. The genetic and phenotypic correlations between CA and LA were strong-moderate and negative. Estimates of genomic heritability for CA and LA were also high (0.85, 0.51) and the genomic correlation between CA and LA was strongly negative (-0.96 ± 0.11). No significant associations were found at the Bonferroni level. However, one intragenic SNP in C1QTNF1 (chromosome 11) was associated with CA, at the chromosomal significance threshold. Another SNP associated with CA was intergenic (chromosome 15). For LA, the most notable SNP was intragenic in CYTH1 (chromosome 11), the other two SNPs were intragenic in MGAT5B and TIMP2 (chromosome 11), and four SNPs were intergenic (chromosomes 1 and 24). The functions of candidate genes indicate that CA and LA could potentially be used as biomarkers for energy balance and clinical mastitis. Further research is recommended to validate the present results.

Asunto(s)

RESUMEN

Modification of dairy proteins during processing impacts structural assemblies, influencing textural and nutritional properties of dairy products, and release and availability of amino acids during digestion. By modifying only pH, acid heat-set bovine dairy gels with divergent textural properties were developed to alter protein digestion. In vitro assay confirmed faster digestion of protein from a firm gel (pH 5.65) versus a soft gel (pH 6.55). We hypothesised that firm gel (FIRM-G; pH 5.6) would result in greater indispensable amino acid (IAA) appearance in circulation over 5 h and corresponding differences in gastric myoelectrical activity relative to soft gel (SOFT-G; pH 6.2). In a randomised, single-blind cross-over trial, healthy females (n = 20) consumed 150 g of each gel; plasma amino acid appearance was assessed over 5 hours. Iso-nitrogenous, iso-caloric gels were prepared from identical mixtures of bovine milk and whey protein concentrates; providing 17.7 g (FIRM-G) and 18.9 g (SOFT-G) of protein per serving. Secondary outcomes included gastric myoelectrical activity measured by body surface gastric mapping, glycaemic, triglyceridaemic, and subjective appetite and digestive responses. Overall plasma IAA (area under the curve) did not differ between gels. However, plasma IAA concentrations were higher, and increased more rapidly over time after SOFT-G compared with FIRM-G (1455 ± 53 versus 1350 ± 62 µmol L-1 at 30 min, p = 0.024). Similarly, total, branched-chain and dispensable amino acids were higher at 30 min with SOFT-G than FIRM-G (total: 3939 ± 97 versus 3702 ± 127 µmol L-1, p = 0.014; branched-chain: 677 ± 30 versus 619 ± 34 µmol L-1, p = 0.047; dispensable: 2334 ± 53 versus 2210 ± 76 µmol L-1, p = 0.032). All other measured parameters were similar between gels. Peak postprandial aminoacidaemia was higher and faster following ingestion of SOFT-G. Customised plasma amino acid appearance from dairy is achievable by altering gel coagulum structure using pH during processing and may have minimal influence on related postprandial responses, with implications for targeting food design for optimal health. The Clinical Trial Registry number is ACTRN12622001418763 (https://www.anzctr.org.au) registered November 7, 2022.

Asunto(s)

RESUMEN

This research paper aimed to locate protein modifications caused by treatment of milk and determine if the modification locations were consistent. The majority of milk for consumption is homogenised using pressure and heat, and this causes changes in the location of proteins in the milk as well as protein modifications. To investigate these proteomic changes, raw milk was pasteurised (72°C, 15 s), then, to separate the treatment for homogenisation, heated at these different pressures and temperatures: 45°C without no pressure applied, 45°C with 35 MPa, 80°C without pressure applied and 80°C, with 35 MPa. Proteomic analysis was done after separating the milk into three fractions: whey, casein and cream. Protein modifications in each fraction were examined and we found Maillard products as well as oxidation to be of interest. The proteins were also further identified and characterised to compare protein modification sites and differences in proteins present in the cream resulting from homogenisation and/or pasteurisation. This experiment showed that both heat and pressure during homogenisation can cause increases in protein modifications as a result of oxidation or the Maillard reaction. Total cysteine oxidation and total proline oxidation differed between treatments although this was only significantly different for cysteine. It was observed that protein modifications occurred in the same location in the protein sequence rather than in random locations which we highlighted by examining α-S1-casein, lactadherin and ß-lactoglobulin.

RESUMEN

A complexation study between blackcurrant pectin (BCP) and whey protein (WP) was carried out to investigate the impact of bound anthocyanins on pectin−protein interactions. The effects of pH (3.5 and 4.5), heating (85 °C, 15 min), and heating sequence (mixed-heated or heated-mixed) were studied. The pH influenced the color, turbidity, particle size, and zeta-potential of the mixtures, but its impact was mainly significant when heating was introduced. Heating increased the amount of BCP in the complexes­especially at pH 3.5, where 88% w/w of the initial pectin was found in the sedimented (insoluble) fraction. Based on phase-separation measurements, the mixed-heated system at pH 4.5 displayed greater stability than at pH 3.5. Heating sequence was essential in preventing destabilization of the systems; mixing of components before heating produced a more stable system with small complexes (<300 nm) and relatively low polydispersity. However, heating WP before mixing with BCP prompted protein aggregation­producing large complexes (>400 nm) and worsening the destabilization. Peak shifts and emergence (800−1200 cm−1) in infrared spectra confirmed that BCP and WP functional groups were altered after mixing and heating via electrostatic, hydrophobic, and hydrogen bonding interactions. This study demonstrated that appropriate processing conditions can positively impact anthocyanin-bound pectin−protein interactions.

Asunto(s)

RESUMEN

Electrostatic complexation of negatively charged polysaccharides with ß-lactoglobulin (ß-lg) has been shown to bolster the protein films at oil/water interfaces thereby improving emulsion stability. However, recent sub-phase exchange experiments demonstrated that highly charged polysaccharides such as low methyl-esterified pectin are complementary only if sequentially introduced to a pre-formed interfacial ß-lg film. In this study, results of transient interfacial shear rheology show that, by using high-methylesterified pectins instead, complexes can be formed in pre-mixed solutions with ß-lg at pH 4 that can lead to reinforced protein films at dodecane/water interfaces. Using this one-shot adsorption of such complexes, pectins as well as short chain polysaccharides like homogalacturonan nearly doubled the steady state shear elastic moduli as compared to that of a pure ß-lg film. The lag times of film formation were established to be primarily decided by the charge density and pattern on the polysaccharide. Based on the results from mixed solutions of ß-lg monomers, it is proposed that the polysaccharide at pH 4 strengthens the resulting interfacial layer by concatenating adsorbed ß-lg molecules thereby establishing cross-links in the aqueous phase.

Asunto(s)

RESUMEN

The value of milk hinges on its physicochemical functionality under processing conditions. We examined composition-functionality relationships with individual milks from 24 New Zealand dairy cows, sampled at 3 times over the season. Milks were classified into type A or B, according to the shape of 3-point heat coagulation time versus pH profiles. Milk type changed over the season for half of the cows in the study. Best subsets regression suggested that different factors controlled heat stability in the 2 milk types. Urea concentration was key for both types, but for type A milks, osmotic pressure and milk solids were the most important predictors of heat stability, whereas casein micelle size and ionic calcium predicted heat stability for type B milks. This study revealed that milk type is prone to change over the season, and the findings suggest that optimizing heat stability could be achieved by different means for type A versus type B milks.

Asunto(s)

RESUMEN

Microencapsulation helps to improve bioavailability of a functional whey protein, lactoferrin (Lf), in adults. Herein, we report the Lf loading capacity (LC) and retention efficiency (RE) in the microparticles of surface-reacted calcium carbonate (SRCC) of different types and compare them to those of widely used vaterite microparticles. The LCs and REs are analyzed in connection to the total surface area and the volume of intraparticle pores. The best performing SRCC3 demonstrates Lf LC of 11.00 wt% achieved in a single absorption step and 74% RE after two cycles of washing with deionized water. A much larger surface area of SRCC templates and a lower pH required to release Lf do not affect its antitumor activity in MCF-7 assay. Layer-by-Layer assembly of pepsin-tannic acid multilayer shell around Lf-loaded microparticles followed by acidic decomposition of the inorganic core produces microencapsulated Lf with a yield ~36 times higher than from vaterite templates reported earlier, while the scale of encapsulated Lf production is ~12,000 times larger. In vitro digestion tests demonstrate the protection of ~65% of encapsulated Lf from gastric digestion. The developed capsules are prospective candidates for functional foods fortified with Lf.

Asunto(s)

RESUMEN

Due to technical simplicity and strong inhibition against the growth of psychrotrophic bacteria in milk, CO2 treatment has emerged as an attractive processing aid to increase the storage time of raw milk before downstream processing. However, it is yet to be adopted by the industry. In order to further explore the suitability of CO2 treatment for raw milk processing, the bacterial populations of carbonated raw milk collected locally from five different sources in Australia were analysed with next-generation sequencing. Growth inhibition by CO2 was confirmed, with spoilage delayed by at least 7days compared with non-carbonated controls. All non-carbonated controls were spoiled by Gammaproteobacteria, namely Pseudomonas fluorescens group bacteria, Serratia and Erwinia. Two out of the five carbonated samples shared the same spoilage bacteria as their corresponding controls. The rest of the three carbonated samples were spoiled by the lactic acid bacterium (LAB) Leuconostoc. This is consistent with higher tolerance of LAB towards CO2 and selection of LAB in meat products stored in CO2-enriched modified atmosphere packaging. No harmful bacteria were found to be selected by CO2. LAB are generally regarded as safe (GRAS), thus the selection for Leuconostoc by CO2 in some of the samples poses no safety concern. In addition, we have confirmed previous findings that 454 pyrosequencing and Illumina sequencing of 16S rRNA gene amplicons from the same sample yield highly similar results. This supports comparison of results obtained with the two different sequencing platforms, which may be necessary considering the imminent discontinuation of 454 pyrosequencing.

Asunto(s)

RESUMEN

Whey is a valuable co-product from cheese making that serves as a raw material for a wide range of products. Its rich nutritional content lends itself to rapid spoilage, thus it typically needs to be pasteurised and refrigerated promptly. Despite the extensive literature on milk spoilage bacteria, little is known about the spoilage bacteria of whey. The utility of carbon dioxide (CO2) to extend the shelf-life of raw milk and cottage cheese has been well established, but its application in whey preservation has not yet been explored. This study aims to characterise the microbial populations of fresh and spoiled sweet whey by culture-independent community profiling using 454 pyrosequencing of 16S rRNA gene amplicons and to determine whether carbonation is effective in inhibiting bacterial growth in sweet whey. The microbiota of raw Cheddar and Mozzarella whey was dominated by cheese starter bacteria. After pasteurisation, two out of the three samples studied became dominated by diverse environmental bacteria from various phyla, with Proteobacteria being the most dominant. Diverse microbial profiles were maintained until spoilage occurred, when the entire population was dominated by just one or two genera. Whey spoilage bacteria were found to be similar to those of milk. Pasteurised Cheddar and Mozzarella whey was spoiled by Bacillus sp. or Pseudomonas sp., and raw Mozzarella whey was spoiled by Pseudomonas sp., Serratia sp., and other members of the Enterobacteriaceae family. CO2 was effective in inhibiting bacterial growth of pasteurised Cheddar and Mozzarella whey stored at 15°C and raw Mozzarella whey stored at 4°C. The spoilage bacteria of the carbonated samples were similar to those of the non-carbonated controls.

Asunto(s)

RESUMEN

The ability of direct contact membrane distillation to concentrate the waste effluent from salty whey, a by-product from the cheese making industry has been investigated. The effect of trace protein in the feed, cross-flow velocity and feed acidity were the factors examined. Flat Sheet PTFE membranes of nominal pore sizes 0.05, 0.22 and 0.45 µm were utilised. A decline in feed flux in the presence of trace protein in the feed was observed, but liquid penetration through the membrane could still be prevented by utilization of a membrane of smaller pore size, to achieve a final total solids concentration of ±30% w/w with water recovery from 37 to 83 %. The pressure-drop across the channel length was also predicted accounting for the feed spacer. To increase the channel length up to 1 m will require operation using the smallest pore size of 0.05 µm, unless very low cross-flow velocities are used. The fouling of the membrane is primarily governed by precipitation of a calcium phosphate salt. However, operation at low pH does not improve the flux or the final salt concentration significantly.

Asunto(s)

RESUMEN

Compositional differences of acid whey (AW) in comparison with other whey types limit its processability and application of conventional membrane processing. Hence, the present study aimed to identify chemical and physical properties of AW solutions as a function of pH (3 to 10.5) at 4 different temperatures (15, 25, 40, or 90°C) to propose appropriate membrane-processing conditions for efficient use of AW streams. The concentration of minerals, mainly calcium and phosphate, and proteins in centrifuged supernatants was significantly lowered with increase in either pH or temperature. Lactic acid content decreased with pH decline and rose at higher temperatures. Calcium appeared to form complexes with phosphates and lactates mainly, which in turn may have induced molecular attractions with the proteins. An increase in pH led to more soluble protein aggregates with large particle sizes. Surface hydrophobicity of these particles increased significantly with temperature up to 40°C and decreased with further heating to 90°C. Surface charge was clearly pH dependent. High lactic acid concentrations appeared to hinder protein aggregation by hydrophobic interactions and may also indirectly influence protein denaturation. Processing conditions such as pH and temperature need to be optimized to manipulate composition, state, and surface characteristics of components of AW systems to achieve an efficient separation and concentration of lactic acid and lactose.

Asunto(s)

RESUMEN

Whey concentrated to 32% lactose was sonicated at 30°C in a non-contact approach at flow rates of up to 12L/min. Applied energy density varied from 3 to 16J/mL at a frequency of 20kHz. Sonication of whey initiated the rapid formation of a large number of lactose crystals in response to acoustic cavitation which increased the rate of crystallisation. The rate of sonocrystallisation was greater than stirring for approximately 180min but slowed down between 120 and 180min as the metastable limit was reached. A second treatment with ultrasound at 120min delivering an applied energy density of 4J/mL stimulated further nuclei formation and the rate of crystallisation was maintained for >300min. Yield on the other hand was limited by the solubility of lactose and could not be improved. The crystal size distribution was narrower than that with stirring and the overall crystal size was smaller.

Asunto(s)

RESUMEN

Membrane distillation (MD) was applied for the concentration of a range of dairy streams, such as whole milk, skim milk and whey. MD of a pure lactose solution was also investigated. Direct contact MD (DCMD) mode experiments were carried out in continuous concentration mode, keeping the warm feed/retentate and cold permeate stream temperatures at 54 °C and 5 °C respectively. Performance in terms of flux and retention was assessed. The flux was found to decrease with an increase of dry-matter concentration in the feed. Retention of dissolved solids was found to be close to 100% and independent of the dry-matter concentration in the feed. Fourier Transform Infrared Spectroscopy (FTIR) of the fouled membranes confirms organics being present in the fouling layer.

RESUMEN

The Code Analysis Repository & Modelling for E-Neuroscience (CARMEN) project aims to enable broad sharing of resources, through the provision of a secure, online environment for storage and curation of data, analysis code and experimental protocols, together with the ability to execute data analysis. While the CARMEN system is initially focused on electrophysiology data, it is equally applicable to many domains outside neuroscience. Metadata are essential for a system such as CARMEN that has the potential to store thousands of data collections and analysis codes; without metadata, resource discovery, interpretation, evaluation and re-use would be severely impeded. Therefore, when any resource (data, service or workflow) is added to the system, users must provide adequate descriptions. These descriptions form a metadata repository that is searchable to allow users to find any kind of resource held in the system, assuming that the user has appropriate access rights. This paper discusses and explores the project's approach to implementing such a metadata repository that meets both system requirements and user expectations. Initial approaches were refined after user evaluations, and a more practical approach was followed that better aligned with the aims of the users and the project as a whole.

Asunto(s)