RESUMEN
The understanding of the atomic-scale structural and chemical ordering in supported nanosized alloy particles is fundamental for achieving active catalysts by design. This report shows how such knowledge can be obtained by a combination of techniques including X-ray photoelectron spectroscopy and synchrotron radiation based X-ray fine structure absorption spectroscopy and high-energy X-ray diffraction coupled to atomic pair distribution function analysis, and how the support-nanoalloy interaction influences the catalytic activity of ternary nanoalloy (platinum-nickel-cobalt) particles on three different supports: carbon, silica, and titania. The reaction of carbon monoxide with oxygen is employed as a probe to the catalytic activity. The thermochemical processing of this ternary composition, in combination with the different support materials, is demonstrated to be capable of fine-tuning the catalytic activity and stability. The support-nanoalloy interaction is shown to influence structural and chemical ordering in the nanoparticles, leading to support-tunable active sites on the nanoalloys for oxygen activation in the catalytic oxidation of carbon monoxide. A nickel/cobalt-tuned catalytic site on the surface of nanoalloy is revealed for oxygen activation, which differs from the traditional oxygen-activation sites known for oxide-supported noble metal catalysts. The discovery of such support-nanoalloy interaction-enabled oxygen-activation sites introduces a very promising strategy for designing active catalysts in heterogeneous catalysis.
RESUMEN
The formation of nanosized alloys between a pair of elements, which are largely immiscible in bulk, is examined in the archetypical case of Pt and Au. Element specific resonant high-energy X-ray diffraction experiments coupled to atomic pair distribution functions analysis and computer simulations prove the formation of Pt-Au alloys in particles less than 10 nm in size. In the alloys, Au-Au and Pt-Pt bond lengths differing in 0.1 Å are present leading to extra structural distortions as compared to pure Pt and Au particles. The alloys are found to be stable over a wide range of Pt-Au compositions and temperatures contrary to what current theory predicts. The alloy-type structure of Pt-Au nanoparticles comes along with a high catalytic activity for electrooxidation of methanol making an excellent example of the synergistic effect of alloying at the nanoscale on functional properties.
RESUMEN
This Article describes findings of the correlation between the atomic scale structure and the electrocatalytic performance of nanoengineered PtNiFe/C catalysts treated at different temperatures for oxygen reduction reaction, aiming at providing a new fundamental insight into the role of the detailed atomic alloying and interaction structures of the catalysts in fuel cell reactions. Both mass and specific activities of the catalysts were determined using rotating disk electrode and proton exchange membrane fuel cell. The mass activities extracted from the kinetic regions in both measurements revealed a consistent trend of decreasing activity with increasing temperature. However, the specific activity data from RDE revealed an opposite trend, that is, increasing activity with increasing temperature. In addition to TEM, XRD, and XPS characterizations, a detailed XAFS analysis of the atomic scale coordination structures was carried out, revealing increased heteroatomic coordination with improved alloying structures for the catalyst treated at the elevated temperatures. XPS analysis has further revealed a reduced surface concentration of Pt for the catalyst for the high temperature treated catalyst. The higher mass activity for the lower temperature treated catalyst is due to Pt surface enrichment on the surface sites, whereas the higher specific activity for the higher temperature treated catalyst reflects an enhanced Pt-alloying surface sites. These findings have thus provided a new insight for assessing the structural correlation of the electrocatalytic activity with the fcc-type lattice change and the atomic scale alloying characteristics. Implications of these findings to the design of highly active alloy electrocatalysts are discussed, along with their enhanced electrocatalytic performance in the fuel cell.
RESUMEN
A nanoparticle-based strategy has been demonstrated using structurally-tailored tert-butylcalixarenes immobilized on gold nanoparticles to tune the guest access to the calixarene cone cavity for cationic recognition. This strategy exploits the interparticle charge-induced aggregation upon selective capture of metal cations into the nanoparticle-immobilized tert-butylcalixarenes, which produces calorimetric changes for the detection. A possible pathway for the binding of M(n+) into the t-BCA structure and the interparticle interaction is proposed for the formation of an electric double layer inducing the interparticle association responsible for the red-shifted surface plasmon resonance band of the nanoparticles. The value of this class of calorimetric nanoprobes will be in the area of designing advanced host-guest probes using a variety of calixarene ligands for ionic recognition in a simplistic detection format.
RESUMEN
We report a novel core-shell-structured ternary nanocube of MnZn ferrite synthesized by controlling the reaction temperature and composition in the absence of conventionally used reducing agents. The highly monodispersed core-shell structure consists of an Fe(3)O(4) core and an MnZn Ferrite shell. The observation of a Moiré pattern indicates that the core and the shell are two highly crystalline materials with slightly different lattice constants that are rotated relative to each other by a small angle. The ternary core-shell nanocubes display magnetic properties regulated by a combination of the core-shell composition and exhibit an increased coercivity and field-cooled/zero-field-cooled characteristics drastically different from those of regular MnZn ferrite nanoparticles. The ability to engineer the spatial nanostructures of ternary magnetic nanoparticles in terms of shape and composition offers atomic-level versatility in fine-tuning the nanoscale magnetic properties.
RESUMEN
One of the most important challenges for the ultimate commercialization of fuel cells is the preparation of active, robust, and low-cost catalysts. This review highlights some findings of our investigations in the last few years in developing advanced approaches to nanostructured catalysts that address this challenge. Emphasis is placed on nanoengineering-based fabrication, processing, and characterization of multimetallic nanoparticles with controllable size (1-10 nm), shape, composition (e.g. Ml(n)M2(100-n), M1(n)M2(m)M3(100-n-m), M1@M2, where M (1 or 2) = Pt, Co, Ni, V, Fe, Cu, Pd, W, Ag, Au etc) and morphology (e.g. alloy, core@shell etc). In addition to an overview of the fundamental issues and the recent progress in fuel cell catalysts, results from evaluations of the electrocatalytic performance of nanoengineered catalysts in fuel cell reactions are discussed. This approach differs from other traditional approaches to the preparation of supported catalysts in the ability to control the particle size, composition, phase, and surface properties. An understanding of how the nanoscale properties of the multimetallic nanoparticles differ from their bulk-scale counterparts, and how the interaction between the nanoparticles and the support materials relates to the size sintering or evolution in the thermal activation process, is also discussed. The fact that the bimetallic gold-platinum nanoparticle system displays a single-phase character different from the miscibility gap known for its bulk-scale counterpart serves as an important indication of the nanoscale manipulation of the structural properties, which is useful for refining the design and preparation of the bimetallic catalysts. The insight gained from probing how nanoparticle-nanoparticle and nanoparticle-substrate interactions relate to the size evolution in the activation process of nanoparticles on planar substrates serves as an important guiding principle in the control of nanoparticle sintering on different support materials. The fact that some of the trimetallic nanoparticle catalysts (e.g. PtVFe or PtNiFe) exhibit electrocatalytic activities in fuel cell reactions which are four-five times higher than in pure Pt catalysts constitutes the basis for further exploration of a variety of multimetallic combinations. The fundamental insights into the control of nanoscale alloy, composition, and core-shell structures have important implications in identifying nanostructured fuel cell catalysts with an optimized balance of catalytic activity and stability.