RESUMEN

Self-powered biosensors with high sensitivity have garnered significant interest for their potential applications in the realm of portable sensing. Herein, a self-powered biosensor with a novel signal amplification strategy was developed by integrating target-controlled release of mediator with an enzyme biofuel cell for the ultrasensitive detection of acetamiprid (ACE). Zeolitic imidazolate framework-67 was utilized as both a nanocontainer for capturing the electron mediator 2,2'-azidobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and a precursor for the synthesis of cobalt nanoparticles/nitrogen, sulfur-codoped carbon nanotubes (Co NPs/NS-CNTs), which were employed as the electrode material for constructing both the glucose oxidase-based bioanode and the laccase-based biocathode. The target analyte ACE can specifically bind to its aptamer, leading to the release of ABTS, which cyclically participates in the catalytic reaction of the biocathode, thereby amplifying the electrochemical signal. By leveraging the benefits of ABTS cyclic catalysis and the effective electrocatalysis of bioelectrodes based on Co NPs/NS-CNTs, the self-powered biosensor has a broad detection range of 0.1-1000 fM and a low detection limit of 25 aM toward ACE. The proposed signal amplification approach presents a promising strategy for enhancing sensitivity and enabling portable analysis in applications of food safety, environmental monitoring, and medical diagnostics.

RESUMEN

Sophorolipids are secondary metabolites produced during fermentation by nonpathogenic yeasts. These molecules are amphiphilic and consist of a hydrophilic sophora sugar moiety and a hydrophobic hydroxylated fatty acid. Based on their degree of esterification, sophorolipids can be divided into the acid and lactone types. Sophorolipids are highly promising biosurfactants with good antibacterial, antiviral, and other biological activities. Moreover, they are characterized by mildness, low toxicity, and environmental friendliness. However, their composition is quite complex, and effective methods for their quality evaluation are lacking. Since sophorolipids do not absorb ultraviolet (UV) light, common UV detectors are unsuitable for fingerprint establishment. In this study, we first selected a charged aerosol detector (CAD) to establish the ultra-high performance liquid chromatography (UHPLC) fingerprint of sophorolipids. The detector had high sensitivity, good reproducibility, and excellent suitability for the detection of substances with no or weak ultraviolet absorption. We then evaluated the similarities between 17 batches of sophorolipid samples. The samples were extracted by ultrasound for 10 min in 80% ethanol aqueous solution at a liquid-solid ratio of 10∶1 (mL/g) and then separated on a Thermo Fisher Scientific Hypersil Gold chromatographic column (150 mm×2.1 mm, 1.9 µm). Separation was performed using acetonitrile-0.01% (v/v) formic acid aqueous solution as the mobile phase via gradient elution. The flow rate was 0.2 mL/min, and the column temperature was 40 ℃. The CAD was used under the following conditions: power function of 1.0, data rate of 5 Hz, filter constant of 3.6, and evaporation temperature of 45 ℃. The chromatograms and retention times of the sophorolipids were compared, and 16 common peaks with strong responses, good resolutions, and stable retention times were selected as characteristic peaks. Oleic acid was chosen as the reference peak because it achieved good separation and a strong chromatographic response in all batches of samples. UHPLC-quadrupole time-of-flight mass spectrometry (UHPLC-QTOF-MS) was used to identify chromatographic peaks in the sophorolipid fingerprints. The results were combined with the retention time rule of the sophorolipids, leading to their identification based on matching with the results of the primary database, the precise relative molecular mass and fragmentation rule of secondary fragments, a self-built database, and the PubChem database. Sixteen compounds were identified, including eight acid sophorolipids, six lactone sophorolipids, and two aliphatic acids. The results of precision, repeatability, and 24 h stability tests indicated that the relative standard deviations (RSDs) of the retention times and peak areas of the 15 characteristic peaks relative to the control peak (oleic acid) were less than 3.0% (n=6). Seventeen batches of sophorolipid samples were analyzed, and the similarity values of all fingerprints were found to be 0.965 or higher. Little differences in chemical composition were observed among the different batches of sophorolipid samples, and the quality of the sophorolipids was relatively consistent. The fingerprint established in this study is stable and reliable; it can be used for the quality evaluation of sophorolipids and lays a solid foundation for future research on production technology and the development and utilization of sophorolipids. The successful application of a universal CAD to the fingerprint establishment of sophorolipids also provides a reliable solution for the fingerprint establishment of substances with no or weak ultraviolet absorption.

Asunto(s)

RESUMEN

OBJECTIVE: To increase the production of root bark of Fengdan by means of picking bud and cutting old branch cultivated in Nanling, Anhui province. METHODS: An experimental plot where Fengdan has been culitivated for 4 years was selected, which was divided into 3 sections for the experiment of picking bud, cutting old branch and comparison. The buds were picked in spring of the first year. 20 plants were dug randomly from both of picking bud and comparison section monthly during April and September, and the dry weight of their root bark was recorded, respectively. The old branches were cut in autumn. 20 plants were dug randomly from both sections of cutting branch and comparison monthly during April and September of the second year, and their root bark dry weight was recorded. RESULTS: The statistical and comparative results showed that compared to the comparison section, prcking bud section botains little increase of production of root bark, while cutting old branch section had got notable increase of production. CONCLUSION: Picking bud plays an unimportant role in the production of Fengdan bark, while cutting old branch has significant influence on it.

Asunto(s)