RESUMEN

Literature is scarce on the performance of Fenton-based processes as post-treatment of municipal wastewater treated by upflow anaerobic sludge blanket (UASB) reactor. This study aims to perform Fenton and photo-Fenton from UASB influent and effluent matrices to remove micropollutants (MPs) models: atrazine (ATZ), rifampicin (RIF), and 17α-ethynylestradiol (EE2). A UASB reactor at bench-scale (14 L) was operated with these MPs, and the AOPs experiments at bench-scale were performed on a conventional photochemical reactor (1 L). A high-pressure vapor mercury lamp was used for photo-Fenton process (UVA-Vis) as a radiation source. Microcrustacean Daphnia magna (acute toxicity) and seeds of Lactuca sativa (phytotoxicity) were indicator organisms for toxicity monitoring. The UASB reactor showed stability removing 90% of the mean chemical oxygen demand, and removal efficiencies for ATZ, RIF, and EE2 were 16.5%, 45.9%, and 15.7%, respectively. A matrix effect was noted regarding the application of both Fenton and photo-Fenton in UASB influent and effluent to remove MPs and toxicity responses. The pesticide ATZ was the most recalcitrant compound, yet the processes carried out from UASB effluent achieved removal >99.99%. The post-treatment of the UASB reactor by photo-Fenton removed acute toxicity in D. magna for all treatment times. However, only the photo-Fenton conducted for 90 min did not result in a phytotoxic effect in L. sativa.

Asunto(s)

RESUMEN

ABSTRACT The present paper aimed to evaluate the impact of microaeration on both the removal performance of some emerging micropollutants (pharmaceuticals, hormones, and bisphenol A) and the microbial community structure of an anaerobic reactor treating synthetic wastewater. Under anaerobic conditions, the removal efficiencies of the micropollutants were very low (< 10%). However, the microaeration (1.0 mL air·min-1 at 27 °C and 1 atm, equivalent to a QAIR/QINF ratio of 0.1) expressively improved the removal efficiencies of all compounds (> 50%). Therefore, supplementing anaerobic reactors with low amounts of oxygen seems to be an interesting strategy to enhance the removal of the micropollutants tested. However, further studies should be carried out with other compounds in order to evaluate the wide applicability of microaeration to different classes of micropollutants in lab- and full-scale treatment systems. Concerning the microbiota structure, both bacterial and archaeal communities were not compromised by the different operational conditions and preserved their functional organization with high richness during the whole experiment.

RESUMO O presente trabalho teve como objetivo avaliar o impacto da microaeração tanto no desempenho de remoção de alguns micropoluentes emergentes (fármacos, hormônios e bisfenol A) quanto na estrutura da comunidade microbiana de um reator anaeróbio tratando uma água residuária sintética. Sob condições anaeróbias, as eficiências de remoção dos micropoluentes foram muito baixas (< 10%). Entretanto, a microaeração (1,0 mL de ar·min-1 a 27 °C e 1 atm, equivalente a uma relação QAR/QAF de 0,1) melhorou expressivamente as eficiências de remoção de todos os compostos (> 50%). Portanto, a suplementação de reatores anaeróbios com baixas quantidades de oxigênio parece ser uma estratégia interessante para melhorar a remoção dos micropoluentes testados. Entretanto, mais estudos devem ser realizados com outros compostos para avaliar a ampla aplicabilidade da microaeração a diferentes classes de micropoluentes em sistemas de tratamento em escala laboratorial e real. Com relação à estrutura da microbiota, tanto as comunidades de bactérias quanto as de arqueias não foram comprometidas pelas diferentes condições operacionais e preservaram sua organização funcional com elevada riqueza durante todo o experimento.

RESUMEN

Buriti fibers were subjected to an alkaline pre-treatment and tested as an adsorbent to investigate the adsorption of copper, cadmium, lead and nickel in mono- and multi-element aqueous solutions, the results showed an increase in the adsorption capacity compared to the unmodified Buriti fiber. The effects of pH, adsorbent mass, agitation rate and initial metal ions concentration on the efficiency of the adsorption process were studied using a fractional 2(4-1) factorial design, and the results showed that all four parameters influenced metal adsorption differently. Fourier transform infrared spectrometry and X-ray fluorescence analysis were used to identify the groups that participated in the adsorption process and suggest its mechanisms and they indicated the probable mechanisms involved in the adsorption process are mainly ion exchange. Kinetic and thermodynamic equilibrium parameters were determined. The adsorption kinetics were adjusted to the homogeneous diffusion model. The adsorption equilibrium was reached in 30 min for Cu(2+) and Pb(2+), 20 min for Ni(2+) and instantaneously for Cd(2+). The results showed a significant difference was found in the competitiveness for the adsorption sites. A mathematical model was used to simulate the breakthrough curves in multi-element column adsorption considering the influences of external mass transfer and intraparticle diffusion resistance.

Asunto(s)

RESUMEN

A cavitação hidrodinâmica se apresenta como um processo oxidativo avançado (POA), permitindo integrar-se aos processos de tratamento de água para consumo humano. Esta pesquisa teve como objetivo investigar os efeitos de diferentes reatores de cavitação hidrodinâmica para tratar água contaminada com esgoto doméstico, avaliando a contaminação microbiológica e os parâmetros físico-químicos. Foram construídos três modelos de reatores com diferentes rotores (R1, R2 e R3). Os resultados obtidos nos reatores R1, R2 e R3 mostraram redução nas concentrações dos parâmetros químicos em todas as amostras, particularmente nitritos, nitratos, bicarbonatos e dureza total, ao passo que a contaminação microbiológica teve inativação completa dos microrganismos estudados (coliformes totais e Escherichia coli).

The hydrodynamic cavitation is presented as an advanced oxidation process (AOP), allowing to integrate the processes of water treatment for human consumption. This research aimed to investigate the effects of different hydrodynamic cavitation reactors for treating water contaminated with sewage, evaluating the microbiological contamination and physicochemical parameters. Three models were constructed with different rotors reactors (R1, R2 and R3). The results obtained in the reactors R1, R2 and R3 have shown a reduction in the concentrations of chemical parameters in all samples, particularly nitrites, nitrates, bicarbonates, and total hardness, while the microbiological contamination was completely inactivation (total coliforms and Escherichia coli).

RESUMEN

Um reator de escoamento contínuo, inoculado com Aspergillus niger AN400, possuía volume total de 5 L e foi operado a 29ºC, com oito horas de tempo de detenção hidráulica e 150 L.h-1 de vazão de ar, para remover 25 mg.L-1 de corante vermelho do congo de água residuária sintética. A alimentação do reator foi realizada em duas fases: Fase I, com 0,5 g.L-1 de sacarose e Fase II, sem sacarose. Na Fase I, foi possível observar eficiências de remoção de matéria orgânica (mg de DQO.L-1) e de cor (mg PT.L-1) de 80 ± 16 por cento e 82 ± 10 por cento (mg Pt.L-1), respectivamente. Na Fase II, a eficiência de remoção de matéria orgânica foi de 75 ± 13 por cento e de cor (mg Pt.L-1) de 89 ± 7 por cento. As maiores remoções de nutrientes foram alcançadas pelo reator na Fase I, com 25 por cento de amônia, 90 por cento de nitrito, 93 por cento de nitrato e 21 por cento de fósforo. Aparentemente, a presença de sacarose melhorou a remoção dos nutrientes.

A continuous flow reactor, inoculated with Aspergillus niger AN400, with total volume of 5 L was operated at 29oC, with eight hours of retention hydraulic time and 150 L.h-1 of air flow rate in order to remove 25 mg.L-1 of Congo Red dye from a synthetic wastewater. The feeding of the reactor, inoculated with Aspergillus niger AN400, was done in two phases: Phase I, with 0,5 g/L of saccharose and Phase II, with no saccharose. In Phase I, it was possible to verify efficiencies of organic matter and color (mg Pt.L-1) removal of 80 ± 16 percent and 82 ± 10 percent, respectively. In Phase II, the efficiency of organic matter removal was 75 ± 13 percent and color removal was 89 ± 7 percent. The higher removals of nutrients were achieved by the reactor in Phase I with 25 percent to ammonia, 90 percent to nitrite, 93 percent to nitrate and 21 percent to phosphorus. Apparently, the presence of saccharose improved the removal of the nutrients.