RESUMEN

Wilson's disease is a rare autosomal recessive disease, caused by impaired secretion of copper into bile due to a defective function of the ATPase 7B enzyme. Clinical manifestation is predominantly hepatic and neurological. Wilson's disease is traditionally considered a disease of children and young adults. It rarely manifests after 40 years of age. In our case report, we present a 67-year-old female in whom Wilson's disease manifested as tremors of the upper extremities and chin that were originally assessed as part of cerebral atherosclerosis and Parkinson's disease. Only the histological finding of liver steatofibrosis, performed due to suspected metastatic changes of the liver, led in the context of neurological symptoms to correct diagnosis and successful treatment.

RESUMEN

Silica-gelatin hybrid aerogels of varying gelatin content (from 4 wt.% to 24 wt.%) can be conveniently impregnated with hydrophobic active agents (e.g. ibuprofen, ketoprofen) in supercritical CO2 and used as drug delivery systems. Contrast variation neutron scattering (SANS) experiments show the molecular level hybridization of the silica and the gelatin components of the aerogel carriers. The active agents are amorphous, and homogeneously dispersed in these porous, hybrid matrices. Importantly, both fast and retarded drug release can be achieved with silica-gelatin hybrid aerogels, and the kinetics of drug release is governed by the gelatin content of the carrier. In this paper, for the first time, a molecular level explanation is given for the strong correlation between the composition and the functionality of a family of aerogel based drug delivery systems. Characterization of the wet aerogels by SANS and by NMR diffusiometry, cryoporometry and relaxometry revealed that the different hydration mechanisms of the aerogels are responsible for the broad spectrum of release kinetics. Low-gelatin (4-11 wt.%) aerogels retain their open-porous structure in water, thus rapid matrix erosion dictates fast drug release from these carriers. In contrast to this, wet aerogels of high gelatin content (18-24 wt.%) show well pronounced hydrogel-like characteristics, and a wide gradual transition zone forms in the solid-liquid interface. The extensive swelling of the high-gelatin hybrid backbone results in the collapse of the open porous structure, that limits mass transport towards the release medium, resulting in slower, diffusion controlled drug release. STATEMENT OF SIGNIFICANCE: Developing new drug delivery systems is a key aspect of pharmaceutical research. Supercritically dried mesoporous aerogels are ideal carriers for small molecular weight drugs due to their open porous structures and large specific surface areas. Hybrid silica-gelatin aerogels can display both fast and retarded drug release properties based on the gelatin contents of their backbones. The structural characterization of the aerogels by SANS and by NMR diffusiometry, cryoporometry and relaxometry revealed that the different hydration mechanisms of the hybrid backbones are responsible for the broad spectrum of release kinetics. The molecular level understanding of the functionality of these hybrid inorganic-biopolymer drug delivery systems facilitates the realization of quality-by-design in this research field.

Asunto(s)

RESUMEN

Methotrexate functionalized silica-gelatin hybrid aerogel (SGM) was synthesized by the sol-gel method and co-gelation. The drug methotrexate (MTX) is covalently linked to the collagen molecules of the hybrid aerogel backbone by amide-bond. The characteristic MTX content of the functionalized hybrid aerogel is ca. 6 wt% by the dry weight. The micronization of SGM aerogel in water yields cell sized (d = 10-20 µm) particles. The cytotoxicity of these microparticles against tumor cell lines (SCC VII and HL-60) is unprecedentedly high, it is approximately equivalent to that of an equal dose of free (dissolved) MTX, as proved by in vitro experiments. Thus, the activity of MTX is intact after aerogel functionalization, and the mass specific cytotoxicity of SGM is high enough for medical applications. Drug release studies verified that MTX cannot be liberated from this drug delivery system solely by chemical hydrolysis, however, collagenase enzymatic activity releases MTX from the functionalized hybrid aerogel. The cytotoxicity of SGM towards various cancerous and non-cancerous cell lines correlates with the collagenase activities of cells. Therefore, conjugation with the hybrid aerogel provides a controlled release system for the antineoplastic agent MTX. The morphology of the delivery vehicle was chosen to adapt the size of cancer cells; thus the metastatic pathways of the tumor cells can get flooded.

Asunto(s)

RESUMEN

In this current article matrix formulations for oral drug delivery are reviewed. Conventional dosage forms and novel applications such as 3D printed matrices and aerogel matrices are discussed. Beside characterization, excipients and matrix forming agents are also enlisted and classified. The incorporated drug could exist in crystalline or in amorphous forms, which makes drug dissolution easily tunable. Main drug release mechanisms are detailed and reviewed to support rational design in pharmaceutical technology and manufacturing considering the fact that R&D members of the industry are forced to obtain knowledge about excipients and methods pros and cons. As innovative and promising research fields of drug delivery, 3D printed products and highly porous, low density aerogels with high specific surface area are spreading, currently limitlessly. These compositions can also be considered as matrix formulations.

Asunto(s)

RESUMEN

Iron(III)-crosslinked alginate aerogel beads (d = 3-5 mm) were prepared and loaded with ibuprofen by using the technique of adsorptive deposition from supercritical CO2. Additional formulations were prepared where the aerogels were co-impregnated by ibuprofen and ascorbic acid. The release of ibuprofen from the Fe(III)-alginate is much faster in pH = 7.4 (PBS) than in pH = 2.0 (HCl), which can be explained by the faster dissolution and higher swelling of the alginate matrix in PBS. By decreasing the size of the beads and using a higher G content alginate the release rate could be slightly increased. A marked acceleration of drug release was achieved in both HCl and PBS by incorporating ascorbic acid into the Fe(III)-alginate aerogel preparations. The explanation is that in aqueous media ascorbic acid in situ reduces the crosslinking Fe(III) to Fe(II). The latter does not interact strongly with alginate, which promotes the hydration of the chains, thus the erosion and dissolution of the carrier matrix.

Asunto(s)

RESUMEN

Specific features of a silica-gelatin aerogel (3 wt.% gelatin content) in relation to drug delivery has been studied. It was confirmed that the release of both ibuprofen (IBU) and ketoprofen (KET) is about tenfold faster from loaded silica-gelatin aerogel than from pure silica aerogel, although the two matrices are structurally very similar. The main goal of the study was to understand the mechanistic background of the striking difference between the delivery properties of these closely related porous materials. Hydrated and dispersed silica-gelatin aerogel has been characterized by NMR cryoporometry, diffusiometry and relaxometry. The pore structure of the silica aerogel remains intact when it disintegrates in water. In contrast, dispersed silica-gelatin aerogel develops a strong hydration sphere, which reshapes the pore walls and deforms the pore structure. The drug release kinetics was studied on a few minutes time scale with 1s time resolution. Simultaneous evaluation of all relevant kinetic and structural information confirmed that strong hydration of the silica-gelatin skeleton facilitates the rapid desorption and dissolution of the drugs from the loaded aerogel. Such a driving force is not operative in pure silica aerogels.

Asunto(s)

RESUMEN

Dissimilatory iron-reducing bacteria are commonly found in microbial communities of aromatic hydrocarbon-contaminated subsurface environments where they often play key role in the degradation of the contaminants. The Siklós benzene, toluene, ethylbenzene, and xylene (BTEX)-contaminated area is one of the best characterized petroleum hydrocarbon-contaminated sites of Hungary. Continuous monitoring of the microbial community in the center of the contaminant plume indicated the presence of an emerging Geobacter population and a Rhodoferax phylotype highly associated with aromatic hydrocarbon-contaminated subsurface environments. The aim of the present study was to make an initial effort to enrich Rhodoferax-related and other dissimilatory iron-reducing bacteria from this environment. Accordingly, four slightly different freshwater media were used to enrich Fe(III) reducers, differing only in the form of nitrogen source (organic, inorganic nitrogen or gaseous headspace nitrogen). Although enrichment of the desired Rhodoferax phylotype was not succeeded, Geobacter-related bacteria were readily enriched. Moreover, the different nitrogen sources caused the enrichment of different Geobacter species. Investigation of the diversity of benzylsuccinate synthase gene both in the enrichments and in the initial groundwater sample indicated that the Geobacter population in the center of the contaminant plume may not play a significant role in the anaerobic degradation of toluene.

Asunto(s)

RESUMEN

A comprehensive study of 14 hybrid aerogels of different composition with applications in drug delivery has been carried out. The overall objective was to modulate the release behavior of drug-impregnated aerogels, from an almost instantaneous release to a semi-retarded delivery prolonged during several hours, through internal surface functionalization. The designed hybrid aerogels were composed of silica and gelatin and functionalized with either phenyl, long (16) hydrocarbon chain or methyl moiety. As model systems, three class II active agents (pKa<5.5), ibuprofen, ketoprofen and triflusal, were chosen to impregnate the aerogels. The work relied on the use of supercritical fluid technology for both the synthesis and functionalization of the hybrid aerogels, as well as for the impregnation with an active agent using supercritical CO2 as a solvent. For the impregnated aerogels, in vitro release profiles were recorded under gastric and intestinal pH-conditions using HPLC techniques. The release behavior observed for the three studied drugs was explained considering the measured dissolution profiles of the crystalline drugs, the aerogel composition and its functionalization. Such features are considered of great interest to tailor the bioavailability of drugs with low water solubility.

Asunto(s)

RESUMEN

A variety of bioactive materials have been investigated as substitute materials for diseased or damaged bone tissues in dentistry. The aim of this study was to prepare mesoporous silica containing biomaterials by sol-gel technology. These materials may be combinated with hydroxyapatite and ß-tricalcium phosphate, as bioactive agents. The synthesis and testing of important physical parameters were performed. Based on these measurements, the silica aerogel can be an applicable material in the dental field in the future.

Asunto(s)

RESUMEN

Naturally occurring and anthropogenic petroleum hydrocarbons are potential carbon sources for many bacteria. The AlkB-related alkane hydroxylases, which are integral membrane non-heme iron enzymes, play a key role in the microbial degradation of many of these hydrocarbons. Several members of the genus Rhodococcus are well-known alkane degraders and are known to harbor multiple alkB genes encoding for different alkane 1-monooxygenases. In the present study, 48 Rhodococcus strains, representing 35 species of the genus, were investigated to find out whether there was a dominant type of alkB gene widespread among species of the genus that could be used as a phylogenetic marker. Phylogenetic analysis of rhodococcal alkB gene sequences indicated that a certain type of alkB gene was present in almost every member of the genus Rhodococcus. These alkB genes were common in a unique nucleotide sequence stretch absent from other types of rhodococcal alkB genes that encoded a conserved amino acid motif: WLG(I/V/L)D(G/D)GL. The sequence identity of the targeted alkB gene in Rhodococcus ranged from 78.5 to 99.2% and showed higher nucleotide sequence variation at the inter-species level compared to the 16S rRNA gene (93.9-99.8%). The results indicated that the alkB gene type investigated might be applicable for: (i) differentiating closely related Rhodococcus species, (ii) properly assigning environmental isolates to existing Rhodococcus species, and finally (iii) assessing whether a new Rhodococcus isolate represents a novel species of the genus.

Asunto(s)

RESUMEN

A floc-forming, Gram-stain-negative, petroleum hydrocarbon-degrading bacterial strain, designated Buc(T), was isolated from a petroleum hydrocarbon-contaminated site in Hungary. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain Buc(T) formed a distinct phyletic lineage within the genus Zoogloea. Its closest relative was found to be Zoogloea caeni EMB43(T) (97.2% 16S rRNA gene sequence similarity) followed by Zoogloea oryzae A-7(T) (95.9%), Zoogloea ramigera ATCC 19544(T) (95.5%) and Zoogloea resiniphila DhA-35(T) (95.4%). The level of DNA-DNA relatedness between strain Buc(T) and Z. caeni EMB43(T) was 31.6%. Cells of strain Buc(T) are facultatively aerobic, rod-shaped, and motile by means of a polar flagellum. The strain grew at temperatures of 5-35 °C (optimum 25-28 °C), and at pH 6.0-9.0 (optimum 6.5-7.5). The predominant fatty acids were C16:0, C10 : 0 3-OH, C12:0 and summed feature 3 (C16 : 1ω7c and/or iso-C15 : 0 2-OH). The major respiratory quinone was ubiquinone-8 (Q-8) and the predominant polar lipid was phosphatidylethanolamine. The genomic DNA G+C content was 63.2 mol%. On the basis of the chemotaxonomic, molecular and phenotypic data, isolate Buc(T) is considered to represent a novel species of the genus Zoogloea, for which the name Zoogloea oleivorans sp. nov. is proposed. The type strain is Buc(T) ( =DSM 28387(T) =NCAIM B 02570(T)).

Asunto(s)