RESUMEN
Ultraviolet radiation (UV)-activated peroxydisulfate (PDS) and peroxymonosulfate (PMS) advanced oxidation processes were examined for their capacity to remove nine pharmaceutically active compounds (PhACs) from secondary effluent. The effect of operational parameters (initial oxidant concentration, UV exposure time, pH, common coexisting anions and effluent organic matter (EfOM)) on UV/PDS and UV/PMS treatment efficiency was investigated in a collimated beam device housing a low-pressure mercury UV lamp emitting light at 253.7â¯nm. Both AOPs achieved high removals (>90%) when applied to pure water. Under otherwise similar conditions the removal percentage fell by 20-30% due to the scavenging of effluent organic matter (EfOM) in secondary effluent. Finally, eliminating EfOM but maintaining the inorganic composition, the radical scavenging effect was reduced and 98.3% and 85.6% average removals were obtained by UV/PDS and UV/PMS, respectively. Increasing pH improved degradation of several PhACs containing amine groups. Higher oxidant dosages created only a significant benefit in UV/PDS. The chloride anion produced a negligible effect on both processes, while higher nitrate concentrations increased removal percentage but did not affect degradation rate constants. Finally and surprisingly, the addition of bicarbonate had the strongest positive impact on the degradation kinetics observed, even stronger than the elimination of EfOM from secondary effluent.
Asunto(s)
Preparaciones Farmacéuticas/química , Sulfatos/química , Rayos Ultravioleta , Aguas Residuales/química , Contaminantes Químicos del Agua/química , Concentración de Iones de Hidrógeno , Cinética , Oxidación-ReducciónRESUMEN
This study analyzed the overall adsorption rate of metronidazole, dimetridazole, and diatrizoate on activated carbons prepared from coffee residues and almond shells. It was also elucidated whether the overall adsorption rate was controlled by reaction on the adsorbent surface or by intraparticle diffusion. Experimental data of the pollutant concentration decay curves as a function of contact time were interpreted by kinetics (first- and second-order) and diffusion models, considering external mass transfer, surface and/or pore volume diffusion, and adsorption on an active site. The experimental data were better interpreted by a first-order than second-order kinetic model, and the first-order adsorption rate constant varied linearly with respect to the surface area and total pore volume of the adsorbents. According to the diffusion model, the overall adsorption rate is governed by intraparticle diffusion, and surface diffusion is the main mechanism controlling the intraparticle diffusion, representing >90% of total intraparticle diffusion.
Asunto(s)
Café , Diatrizoato/química , Dimetridazol/química , Metronidazol/química , Prunus dulcis/química , Purificación del Agua/métodos , Adsorción , Carbón Orgánico/química , Diatrizoato/análisis , Difusión , Cinética , Metronidazol/análisisRESUMEN
The objective of this study was to analyze the equilibrium and adsorption kinetics of nitroimidazoles on activated carbon cloth (ACC), determining the main interactions responsible for the adsorption process and the diffusion mechanism of these compounds on this material. The influence of the different operational variables, such as ionic strength, pH, temperature, and type of water (ultrapure, surface, and waste), was also studied. The results obtained show that the ACC has a high capacity to adsorb nitroimidazoles in aqueous solution. Electrostatic interactions play an important role at pH<3, which favors the repulsive forces between dimetridazole or metronidazole and the ACC surface. The formation of hydrogen bonds and dispersive interactions play the predominant role at higher pH values. Modifications of the ACC with NH3, K2S2O8, and O3 demonstrated that its surface chemistry plays a predominant role in nitroimidazole adsorption on this material. The adsorption capacity of ACC is considerably high in surface waters and reduced in urban wastewater, due to the levels of alkalinity and dissolved organic matter present in the different types of water. Finally, the results of applying kinetic models revealed that the global adsorption rate of dimetridazole and metronidazole is controlled by intraparticle diffusion.