RESUMEN

The intricate interaction of the scaffold's architecture/geometry and with the cells is essential for tissue engineering and regenerative medicine. Cells sense their surrounding dynamic cues such as biophysical, biomechanical, and biochemical, and respond to them differently. Numerous studies have recently explored and reported the effect of contact guidance by culturing various types of cells on different types of micropatterned substrates such as microgrooves, geometric (square and triangle) micropattern, microstrips, micropatterned nanofibers. Amongst all of these micropatterned polymeric substrates; electrospun nanofibers have been regarded as a suitable substrate as it mimics the native ECM architectures. Therefore, in the present study; stencil-assisted electrospun Grid-lined micropatterned PCL-Collagen nanofibers (GLMPCnfs) were fabricated and its influence on the alignment and differentiation of pre-osteoblast cells (MC3T3-E1) was investigated. The randomly orientated Non-patterned PCL-Collagen nanofibers (NPPCnfs) were used as control. The patterns were characterized for their geometrical features such as area and thickness of deposition using surface profiler and scanning electron microscopy. A 61 % decrease in the overall area of GLMPCnfs as compared to the stencil area demonstrated the potential of electrofocusing phenomenon in the process of patterning electrospun nanofibers into various micron-scale structures. The MC3T3-E1 cells were confined and aligned in the direction of GLMPCnfs as confirmed by a high cellular aspect ratio (AR = 5.41), lower cellular shape index (CSI = 0.243), and cytoskeletal reorganization assessed through the F-actin filament immunocytochemistry (ICC) imaging. The aligned cells along the GLMPCnfs exhibited elevated alkaline phosphatase activity and enhanced mineralization. Furthermore, the gene expression profiling revealed upregulation of key osteogenic markers, such as ALP, OCN, OPN, COL1A1, and osteocyte markers DMP1, and SOST. Consequently, the research highlights the impact of GLMPCnfs on the cellular behaviour that results to the pre-osteoblast differentiation and the potential for stimulant-free early osteogenesis. These results offer an extensive understanding and mechanistic insight into how scaffold topography can be modified to influence cellular responses for effective bone regeneration strategies.

Asunto(s)

RESUMEN

Despite of being in different microenvironment, breast cancer cells influence the bone cells and persuade cancer metastasis from breast to bone. Multiple co-culture approaches have been explored to study paracrine signaling between these cells and to study the progression of cancer. However, lack of native tissue microenvironment remains a major bottleneck in existing co-culture technologies. Therefore, in the present study, a tumorigenic and an osteogenic microenvironment have been sutured together to create a multi-cellular environment and has been appraised to study cancer progression in bone tissue. The PCL-polystyrene and PCL-collagen fibrous scaffolds were characterized for tumorigenic and osteogenic potential induction on MDA-MB-231 and MC3T3-E1 cells respectively. Diffusion ability of crystal violet, glucose, and bovine serum albumin across the membrane were used to access the potential paracrine interaction facilitated by device. While in co-cultured condition, MDA-MB-231 cells showed EMT phenotype along with secretion of TNFα and PTHrP which lower down the expression of osteogenic markers including alkaline phosphatase, RUNX2, Osteocalcin and Osteoprotegerin. The cancer progression in bone microenvironment demonstrated the role and necessity of creating multiple tissue microenvironment and its contribution in studying multicellular disease progression and therapeutics.

Asunto(s)

RESUMEN

Scaffolds for bone tissue engineering require considerable mechanical strength to repair damaged bone defects. In this study, we designed and developed mechanically competent composite shape memory triphasic bone scaffolds using fused filament fabrication (FFF) three dimensional (3D) printing. Wollastonite particles (WP) were incorporated into the poly lactic acid (PLA)/polycaprolactone (PCL) matrix as a reinforcing agent (up to 40 wt%) to harness osteoconductive and load-bearing properties from the 3D printed scaffolds. PCL as a minor phase (20 wt%) was added to enhance the toughening effect and induce the shape memory effect in the triphasic composite scaffolds. The 3D-printed composite scaffolds were studied for morphological, thermal, and mechanical properties, in vitro degradation, biocompatibility, and shape memory behaviour. The composite scaffold had interconnected pores of 550 µm, porosity of more than 50%, and appreciable compressive strength (∼50 MPa), which was over 90% greater than that of the pristine PLA scaffolds. The flexural strength was improved by 140% for 40 wt% of WP loading. The inclusion of WP did not affect the thermal property of the scaffolds; however, the inclusion of PCL reduced the thermal stability. An accelerated in vitro degradation was observed for WP incorporated composite scaffolds compared to pristine PLA scaffolds. The inclusion of WP improved the hydrophilic property of the scaffolds, and the result was significant for 40 wt% WP incorporated composite scaffolds having a water contact angle of 49.61°. The triphasic scaffold exhibited excellent shape recovery properties with a shape recovery ratio of ∼84%. These scaffolds were studied for their protein adsorption, cell proliferation, and bone mineralization potential. The incorporation of WP reduced the protein adsorption capacity of the composite scaffolds. The scaffold did not leach any toxic substance and demonstrated good cell viability, indicating its biocompatibility and growth-promoting behavior. The osteogenic potential of the WP incorporated scaffolds was observed in MC3T3-E1 cells, revealing early mineralization in pre-osteoblast cells cultured in different WP incorporated composite scaffolds. These results suggest that 3D-printed WP reinforced PLA/PCL composite bioactive scaffolds are promising for load bearing bone defect repair.

Asunto(s)

RESUMEN

The extensive research work in the exhilarating area of foldamers (artificial oligomers possessing well-defined conformation in solution) has shown them to be promising candidates in biomedical research and materials science. The post-modification approach is successful in peptides, proteins, and polymers to modulate their functions. To the best of our knowledge, site-selective post-modification of a foldamer affording molecules with different pendant functional groups within a molecular scaffold has not yet been reported. We demonstrate for the first time that late-stage site-selective functionalization of short hybrid oligomers is an efficient approach to afford molecules with diverse functional groups. In this article, we report the design and synthesis of hybrid peptides with repeating units of leucine (Leu) and 5-amino salicylic acid (ASA), regioselective post-modification, conformational analyses (based on solution-state NMR, circular dichroism and computational studies) and morphological studies of the peptide nanostructures. As a proof-of-concept, we demonstrate the applications of differently modified peptides as drug delivery agents, imaging probes, and anticancer agents. The novel feature of the work is that the difference in reactivity of two phenolic OH groups in short biomimetic peptides was utilized to achieve site-selective post-modification. It is challenging to apply the same approach to short α-peptides having a poor folding tendency, and their post-functionalization may considerably affect their conformation.

Asunto(s)

RESUMEN

For substantial in vitro cancer biology research, the 3D cell culture method has now been regarded as more suitable model expected to be recapitulating maximum in vivo tumor mass relevance. Despite of available techniques to develop in vitro 3D models, a system availing a physiologically relevant in vitro 3D model of primary lung adenocarcinoma with extracellular matrix (ECM) mimicry and similar tumorigenic properties still remains a quest. Thus, in the present study, chemically modified Dextran-Chitosan (MDC) hydrogel has been developed as a 3D tumoroid aiding scaffold. The 3D A549 tumoroids aided by the MDC scaffold have physiologically relevant proliferation, migration, invasive potential, and Gefitinib [targeting epidermal growth factor receptor (EGFR)] efficacy as compared to the 2D cultured cells. The surface topography and wettability of hydrogel availed in vivo micro tumor mass mimicking Lung adenocarcinoma 3D in vitro model. Thus, opening an innovative avenue for elucidating the disease mechanism and drug efficacy on relevant 3D cancer models in vitro.

Asunto(s)

RESUMEN

We report the complete genome sequence of Salipaludibacillus sp. strain CUR1, which was isolated from Sambhar Lake (a soda lake) in Rajasthan, India. The whole-genome sequencing of this strain has been done to explore the industrially important hydrolytic and extracellular enzymes that can be active under high-salt and high-pH conditions.

RESUMEN

Physiological inflammation has been shown to promote bone regeneration; however, prolonged inflammation impedes the osteogenesis and bone repair process. To overcome the latter we aimed to develop a dual drug delivering nanofibrous scaffold to promote osteogenic differentiation of mesenchymal stromal cells (MSCs) and modulate the pro-inflammatory response of macrophages. The polycaprolactone (PCL)-collagen nanofibrous delivery system incorporating dexamethasone and simvastatin was fabricated by electrospinning process. The morphological analysis and mRNA, as well as protein expression of proinflammatory and anti-inflammatory cytokines in human monocytes (U937 cells), demonstrated the immunocompatibility effect of dual drug-releasing nanofibrous scaffolds. Nitric oxide estimation also demonstrated the anti-inflammatory effect of dual drug releasing scaffolds. The scaffolds demonstrated the osteogenic differentiation of adipose-derived MSCs by enhancing the alkaline phosphatase (ALP) activity and mineral deposition after 17 days of cell culture. The increased expression of Runt-related transcription factor-2 (RUNX-2) and osteocalcin at mRNA and protein levels supported the osteogenic potential of dual drug-loaded fibrous scaffolds. Hence, the results indicate that our fabricated nanofibrous scaffolds exhibit immunomodulatory properties and could be employed for bone regeneration applications after further in-vivo validation.

RESUMEN

The multistep metastasis process is carried out by the combinatorial effect of the stromal cells and the cancerous cells and plays vital role in the cancer progression. The scaffold/physical cues aided 3D cancer spheroid imitates the spatiotemporal organization and physiological properties of the tumor. Understanding the role of the key players in different stages of metastasis, the molecular cross-talk between the stromal cells and the cancer cells contributing in the advancement of the metastasis through 3D cancer spheroid co-culture in vitro platform is the center of discussion in the present review. This state-of-art in vitro platform utilized to study the cancer cell host defence and the role of exosomes in the cross talk leading to cancer progression has been critically examined here. 3D cancer spheroid co-culture technique is the promising next-generation in vitro approach for exploring potent treatments and personalized medicines to combat cancer metastasis leading to cancer progression.

Asunto(s)

RESUMEN

Cellulose nanofibers, which are troublesome to spin into fibers, can be easily fabricated by post-regeneration of its acetate-derived threads. Cellulose is a natural polymer; it enjoys better biocompatibility, cellular mimicking, and hydrophilic properties than its proportionate analog. Herein, we regenerated acetate-free nanofibers by alkaline de-acetylation of as-spun nanofibers. The resultant cellulose nanofibers previously loaded with hydroxyapatite (HAp) were immobilized using silver (Ag) nanoparticles (NPs) by reduction of adsorbed Ag ions on using sodium borohydride. These amalgamated nanofibers were characterized for SEM, EDX, TEM, FTIR, and hydrophilicity tests revealing the existence of both HAp and Ag NPs in/on the nanofiber scaffolds. The de-acetylation of composite nanofibers resulted in spontaneous hydrophilicity. These nanofibers were cytocompatible, as resolved by MTT assay conducted on chicken embryo fibroblasts. The SEM of the samples after cell culture revealed that these composites allowed a proliferation of the fibroblasts over and within the nanofiber network, and increased concentration of HAp levitated the excessive of apatite formation as well as increased cell growth. The antimicrobial activity of these nanofibers was assessed on E. coli (BL21) and S. aureus, suggesting the potential of de-acetylated nanofibers to restrain bacterial growth. The degradation study for 10, 30, and 60 days indicated degradation of the fibers much is faster in enzymes as compared to degradation in PBS. The results certify that these nanofibers possess enormous potential for soft and hard tissue engineering besides their antimicrobial properties.

Asunto(s)

RESUMEN

Bone regeneration is a multi-step, overlapping process, in which angiogenesis and osteogenesis are the key players. Several attempts have been made to promote angiogenesis-coupled osteogenesis using scaffolding technology. However, the recreation of functional vasculature during bone regeneration is an unparalleled challenge. In this study, a dual drug-delivering polycaprolactone-collagen fibrous scaffold is reported to promote early osteogenesis and angiogenesis. Simvastatin as a pro-angiogenic and dexamethasone as an osteoinductive drug were encapsulated to functionalize the electrospun fibers. The optically transparent fibrous mat represented the sustained and sequential release of drugs for 28 days. The fibrous mesh increased cell proliferation and enhanced the osteogenic differentiation up to 21 days. The alkaline phosphatase activity and mineral deposition were comparatively higher on dual drug-releasing fibers when compared to control fibers. The dual drug-releasing osteoconductive fibers demonstrated osteogenesis as early as 7 days with a 3.7 and 1.5 fold increase in the expression of osteogenic differentiation markers (RUNX2 and osteocalcin), respectively. In vitro angiogenesis using primary human umbilical vein endothelial cells (pHUVECs) showed no significant difference in cell proliferation among control fibers and dual drug-releasing fibers. However, the angioinductive nature of simvastatin released from the fibers demonstrated tube formation and 2 fold higher angiogenic score. The mRNA and protein expression study of angiogenic markers (VEGFR2 and eNOS) by polymerase chain reaction and western blotting depicted the angioinducing potential of dual drug-releasing fibers. VEGFR2 and eNOS mRNA expressions increased by 1.1 and 1.6 fold, respectively, whereas their protein expression increased by 3.2 and 1.7 fold, respectively. The overall results demonstrate the synergistic effect of osteoconductive substrate and osteoinductive dual drugs to promote early osteogenesis, and release of the pro-angiogenic drug promotes angiogenesis.

Asunto(s)

RESUMEN

The development of clinical applications has led to a perpetual increase in the demand for mesenchymal stem cells (MSCs). However, the ex vivo expansion of MSCs while maintaining their stemness and differentiation potential remains an immense challenge. MSCs require high cell density for their intercellular communication and specific physico-chemical cues from the surrounding environment for spheroid formation in order to maintain their stemness. Inadequacy of the traditional in vitro cell culture method (tissue culture plastic surface) to fulfill any of these special requirements is responsible for inducing the loss of stem cell properties of the MSCs over time. In this study, we propose that glucosaminoglycan (GAG) mimicking ultrafine nanofibers could support the spheroid culture for in vitro human MSC expansion. The geometrical and biochemical properties of nanofibers provide biomimicking cues to MSCs, as well as enhance cell-cell interactions and stimulate spheroid formation in MSCs, which subsequently result in increased cell proliferation, enhanced expression of stem cell markers and maintenance of their multilineage differentiation potential. Furthermore, close monitoring of the behavior of MSCs on nanofibers serves as the key to understand their mode of action in niche formation. Interestingly, GAG mimicking substrate stimulated MSCs for long-distance intercellular communication via 'tunneling tubes', their subsequent migration and niche formation. These kinds of cellular interactions over long distances have rarely been observed in MSCs to provide better insight for future studies on MSC niche. Furthermore, PCL-CHT nanofibers were observed to be as conducive to use as tissue culture polystyrene for stem cell expansion. Overall, these polymeric nanofibers provide a more relevant, convenient and more suitable substrate than the conventional monolayer culture for in vitro MSC expansion.

Asunto(s)

RESUMEN

In the present work, a novel strategy was explored to fabricate nanofiber scaffolds consisting of cellulose assimilated with titanium dioxide (TiO2 ) and silver (Ag) nanoparticles (NPs). The concentration of the TiO2 NPs in the composite was adjusted to 1.0, 1.5, and 2.0 wt % with respect to polymer concentration used for the electrospinning of colloidal solutions. The fabricated composite scaffolds were dispensed to alkaline deacetylation using 0.05 M NaOH to remove the acetyl groups in order to generate pure cellulose nanofibers containing TiO2 NPs. Moreover, to augment our nanofiber scaffolds with antibacterial activity, the in situ deposition approach of using Ag NPs was utilized with varied molar concentrations of 0.14, 0.42, and 0.71 M. The physicochemical properties of the nanofibers were identified by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and contact angle meter studies. This demonstrated the presence of both TiO2 and Ag NPs and complete deacetylation of nanofibers. The antibacterial efficiency of the nanofibers was scrutinized against Escherichia coli and Staphylococcus aureus, revealing proper in situ deposition of Ag NPs and confirming the nanofibers are antibacterial in nature. The biocompatibility of the scaffolds was accustomed using chicken embryo fibroblasts, which confirmed their potential role to be used as wound-healing materials. Furthermore, the fabricated scaffolds were subjected to analysis in simulated body fluid at 37°C to induce mineralization for future osseous tissue integration. These results indicate that fabricated composite nanofiber scaffolds with multifunctional characteristics will have a highest potential as a future candidate for promoting new tissues artificially.

Asunto(s)

RESUMEN

Bone fracture healing is a multistep and overlapping process of inflammation, angiogenesis and osteogenesis. It is initiated by inflammation, causing the release of various cytokines and growth factors. It leads to the recruitment of stem cells and formation of vasculature resulting in the functional bone formation. This combined phenomenon is used by bone tissue engineers from past few years to address the problem of vasculature and osteogenic differentiation during bone regeneration. In this review, we have discussed all major studies reporting the dual functioning approach to promote osteogenesis coupled angiogenesis using various scaffolds. These scaffolds are broadly classified into four types based on the nature of their structural and functional components. The functionality of the scaffold is either due to the structural components or the loaded cargo which conducts or induces the coupled functionality. Dual delivery system for osteoinductive and angioinductive factors ensures the co-delivery of two different types of molecules to induce osteogenesis and angiogenesis. Single delivery scaffold for angioinductive and osteoinductive molecule releases single type of molecules which could induce both angiogenesis and osteogenesis. Osteoconductive scaffold consisted of bone constituents releases angioinductive factors. Osteoconductive and angioconductive scaffold composed of components which provide the native substrate features for osteogenesis and angiogenesis. This review article also discusses the studies highlighting the synergism of physico-chemical stimuli as dual functioning feature to enhance angiogenesis and osteogenesis simultaneously. In addition, this article covers one of the least discussed area of the bone regeneration i.e. 'cartilage formation as a median between angiogenesis and osteogenesis'.

Asunto(s)

RESUMEN

Biomimetic cell culture substrates are developed as an alternative to the conventional substrates. They provide necessary biochemical and biophysical cues to the cells from their surrounding environment for their optimal growth, behaviour and physiology. Changes in physiology of cells growing on biomimetic substrate can essentially affect results of in vitro biological experiments such as drug cytotoxicity, nanoparticle internalization or signalling pathways. As majority of ECM proteins are fibrous in nature, nanofibrous scaffolds have more biomimicking properties. Therefore, in this study, we developed ECM mimicking polycaprolactone-chitosan nanofiber substrate and evaluated its effect on cell morphology, proliferation, cell cycle and ECM production. Further, cellular uptake of BSA-AuNCs has been assessed on conventional and biomimetic substrate in order to demonstrate the effect of these events on cellular properties. It was observed that the cells that were grown for 15 days on the nanofibers, had majority of cells in the proliferative phase of cell cycle compared to TCPS. Moreover, these cells showed extensive collagen and fibronectin production. Due to these conditions C3H10T1/2 cells displayed higher cell internalization of BSA-AuNCs. Overall, this study indicates that the nano-topographical and biochemical environment could alter the cell proliferative behaviour and ECM production, which affects the cell internalization of BSA-AuNCs. Also, PCL-chitosan nanofibrous substrate could be a better alternative to TCPS for cell culture studies.

RESUMEN

Severe blood loss due to traumatic injuries remains one of the leading causes of death in emergency settings. Chitosan continues to be the candidate material for hemostatic applications due to its inherent hemostatic properties. However, available chitosan-based dressings have been reported to have an acidic odor at the wound site due to the incorporation of acid based solvents for their fabrication and deformation under compression owing to low mechanical strength limiting its usability. In the present study semi-IPN cryogel was fabricated via Schiff's base cross-linking between the polyaldehyde groups of oxidized dextran and thiolated chitosan in presence of locust bean gum (LBG) known for its hydrophilicity. Polymerization at -12 °C yielded macroporous semi-IPN cryogels with an average pore size of 124.57 ± 20.31 µm and 85.46% porosity. The hydrophobicity index of LBG reinforced semi-IPN cryogel was reduced 2.42 times whereas the swelling ratio was increased by 156.08% compare to control cryogel. The increased hydrophilicity and swelling ratio inflated the compressive modulus from 28.1 kPa to 33.85 for LBG reinforced semi-IPN cryogel. The structural stability and constant degradation medium pH were also recorded over a period of 12 weeks. The cryogels demonstrated lower adsorption affinity towards BSA. The cytotoxicity assays (direct, indirect) with 3T3-L1 fibroblast cells confirmed the cytocompatibility of the cryogels. The hemolysis assay showed <5% hemolysis confirming blood compatibility of the fabricated cryogel, while whole blood clotting and platelet adhesion assays confirmed the hemostatic potential of semi-IPN cryogel.

RESUMEN

Skin wound healing involves a coordinated cellular response to achieve complete reepithelialisation. Elevated levels of reactive oxygen species (ROS) in the wound environment often pose a hindrance in wound healing resulting in impaired wound healing process. Cerium oxide nanoparticles (CeNPs) have the ability to protect the cells from oxidative damage by actively scavenging the ROS. Furthermore, matrices like nanofibers have also been explored for enhancing wound healing. In the current study CeNP functionalised polycaprolactone (PCL)-gelatin nanofiber (PGNPNF) mesh was fabricated by electrospinning and evaluated for its antioxidative potential. Wide angle XRD analysis of randomly oriented nanofibers revealed ∼2.6 times reduced crystallinity than pristine PCL which aided in rapid degradation of nanofibers and release of CeNP. However, bioactive composite made between nanoparticles and PCL-gelatin maintained the fibrous morphology of PGNPNF upto 14 days. The PGNPNF mesh exhibited a superoxide dismutase (SOD) mimetic activity due to the incorporated CeNPs. The PGNPNF mesh enhanced proliferation of 3T3-L1 cells by ∼48% as confirmed by alamar blue assay and SEM micrographs of cells grown on the nanofibrous mesh. Furthermore, the PGNPNF mesh scavenged ROS, which was measured by relative DCF intensity and fluorescence microscopy; and subsequently increased the viability and proliferation of cells by three folds as it alleviated the oxidative stress. Overall, the results of this study suggest the potential of CeNP functionalised PCL-gelatin nanofibrous mesh for wound healing applications.

RESUMEN

Cancer is a serious death causing disease having 8.2 million deaths in 2012. In the last decade, only about 10% of chemotherapeutic compounds showed productivity in drug screening. Two-dimensional culture assays are the most common in vitro drug screening models, which do not precisely model the in vivo condition for reliable preclinical drug screening. Three-dimensional scaffold-based cell cultures perhaps mimic tumor microenvironment and recapitulate physiologically more relevant tumor. This study was carried out to develop bi-functional oxidized dextran-based cell instructive hydrogel that provides three-dimensional environment to cancer cells for inducing microtumor. Oxidized dextran was blended with thiolated chitosan to fabricate an in situ self-gelable hydrogel (modified dextran-chitosan) in a one-step process. The hydrogels characterization revealed cross-linked network structure with highly porous structure and water absorption. The modified dextran-chitosan hydrogel showed reduced hydrophobicity and has reduced protein absorption, which resulted in changing the A549 cell adhesiveness, and encouraged them to form microtumor. The cells were proliferated in clusters having spherical morphology with randomly oriented stress fiber and large nucleus. Further microtumors were studied for hypoxia where reactive oxygen species generation demonstrated 15-fold increase as compared to monolayer culture. Drug-sensitivity results showed that microtumors generated on modified dextran-chitosan hydrogel showed resistance to doxorubicin with having 33%-58% increased growth than two-dimensional monolayer model at concentrations of 25-100 µM. In summary, the modified dextran-chitosan scaffold can provide surface chemistry that induces three-dimensional microtumors with physiologically relevant properties to in vivo tumor including growth, morphology, extracellular matrix production, hypoxic phenotype, and drug response. This model can be potentially utilized for drug toxicity studies and cancer disease modeling to understand tumor phenotype and progression.

RESUMEN

BODIPY-clickates, F1 and F2, for the detection of Hg(2+) have been designed, synthesized and characterized. Both F1 and F2 showed hyperchromic shifts in the UV-visible spectra in response to increasing Hg(2+) concentrations. Hg(2+) ion binding caused perturbation of the emission quenching process and chelation induced enhanced bathochromic emission of F1 and F2 to 620 nm and 660 nm, respectively. Job's plot clearly indicated that the binding ratio of F1 and F2 with Hg(2+) was 1 : 1. The NMR titration of BODIPY-clickates with Hg(2+) confirmed that aromatic amines and triazoles were involved in the binding event. Furthermore, HRMS data of F1-Hg(2+) and F2-Hg(2+) supported the formation of mercury complexes of BODIPY-clickates. The dissociation constant for the interaction between fluorescent probes F1 and F2 with Hg(2+) was found to be 24.4 ± 5.1 µM and 22.0 ± 3.9 µM, respectively. The Hg(2+) ion induced fluorescence enhancement was almost stable in a pH range of 5 to 8. Having less toxicity to live cells, both the probes were successfully used to map the Hg(2+) ions in live A549 cells.

Asunto(s)

RESUMEN

Inulin, a naturally occurring polysaccharide, was acetylated to make it processable by electrospraying, a facile and single step method for microparticle fabrication. Electrospraying process parameters were optimized for fabrication of spherical and monodisperse indomethacin (IDM) loaded inulin acetate (INA) microparticles. The apparent entrapment efficiency of IDM was determined to be 100%, whereas working encapsulation efficiency was estimated to be 35.39 ± 1.63%. Differential scanning calorimetry and X-ray diffraction analysis confirmed molecular dispersion of IDM in an amorphous state within the INA matrix. Finally, the results from in vitro release study performed in simulated gastro-intestinal fluids demonstrated that IDM was released only in simulated colonic fluid that contained inulinase. Therefore, this study demonstrates that acetylation of inulin does not alter its susceptibility to inulinase and that microparticles fabricated from INA can be developed as a colon targeting drug delivery system.

Asunto(s)

RESUMEN

The importance of self-assembling peptides (SAPs) in regenerative medicine is becoming increasingly recognized. The propensity of SAPs to form nanostructured fibers is governed by multiple forces including hydrogen bonds, hydrophobic interactions and π-π aromatic interactions among side chains of the amino acids. Single residue modifications in SAP sequences can significantly affect these forces. BMHP1-derived SAPs is a class of biotinylated oligopeptides, which self-assemble in ß-structured fibers to form a self-healing hydrogel. In the current study, selected modifications in previously described BMHP1-derived SAPs were designed in order to investigate the influence of modified residues on self-assembly kinetics and scaffold formation properties. The Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis demonstrated the secondary structure (ß-sheet) formation in all modified SAP sequences, whereas atomic force microscopy (AFM) analysis further confirmed the presence of nanofibers. Furthermore, the fiber shape and dimension analysis by AFM showed flattened and twisted fiber morphology ranging from ∼8 nm to ∼70 nm. The mechanical properties of the pre-assembled and post assembled solution were investigated by rheometry. The shear-thinning behavior and rapid re-healing properties of the pre-assembled solutions make them a preferable choice for injectable scaffolds. The wide range of stiffnesses (G')--from ∼1000 to ∼27,000 Pa--exhibited by the post-assembled scaffolds demonstrated their potential for a variety of tissue engineering applications. The extra cellular matrix (ECM) mimicking (physically and chemically) properties of SAP scaffolds enhanced cell adhesion and proliferation. The capability of the scaffold to facilitate murine neural stem cell (mNSC) proliferation was evaluated in vitro: the increased mNSCs adhesion and proliferation demonstrated the potential of newly synthesized SAPs for regenerative medicine approaches.

Asunto(s)