RESUMEN
OBJECTIVE: To investigate the impact of incorporating the antimicrobial nanomaterial ß-AgVO3 into orthodontic resin, focusing on degree of conversion, surface characteristics, microhardness, adhesion properties, and antimicrobial activity. METHODS: The 3 M Transbond XT resin underwent modification, resulting in three groups (Control, 2.5% addition, 5% addition) with 20 specimens each. Fourier transform infrared spectroscopy assessed monomer conversion. Laser confocal microscopy examined surface roughness, and microhardness was evaluated using Knoop protocols. Shear strength was measured before and after artificial aging on 36 premolar teeth. Microbiological analysis against S. mutans and S. sanguinis was conducted using the agar diffusion method. RESULTS: Degree of conversion remained unaffected by time (P = 0.797), concentration (P = 0.438), or their interaction (P = 0.187). The 5% group exhibited the lowest surface roughness, differing significantly from the control group (P = 0.045). Microhardness showed no significant differences between concentrations (P = 0.740). Shear strength was highest in the control group (P < 0.001). No significant differences were observed in the samples with or without thermocycling (P = 0.759). Microbial analysis revealed concentration-dependent variations, with the 5% group exhibiting the largest inhibition halo (P < 0.001). CONCLUSIONS: Incorporating ß-AgVO3 at 2.5% and 5% concentrations led to significant differences in surface roughness, adhesion, and antimicrobial activity. Overall, resin modification positively impacted degree of conversion, surface characteristics, microhardness, and antimicrobial activity. Further research is warranted to determine clinically optimal concentrations that maximize antimicrobial benefits while minimizing adverse effects on adhesion properties. CLINICAL SIGNIFICANCE: Incorporating ß-AgVO3 into orthodontic resin could improve patient quality of life by prolonging intervention durability and reducing the impact of cariogenic microorganisms. The study's findings also hold promise for the industry, paving the way for the development of new materials with antimicrobial properties for potential applications in the health sector.
Asunto(s)
Ensayo de Materiales , Nanopartículas del Metal , Resistencia al Corte , Plata , Streptococcus mutans , Propiedades de Superficie , Vanadatos , Streptococcus mutans/efectos de los fármacos , Humanos , Plata/química , Plata/farmacología , Vanadatos/química , Vanadatos/farmacología , Nanopartículas del Metal/química , Espectroscopía Infrarroja por Transformada de Fourier , Dureza , Cementos de Resina/química , Streptococcus sanguis/efectos de los fármacos , Soportes Ortodóncicos/microbiología , Microscopía Confocal , Nanoestructuras/química , Adhesión Bacteriana/efectos de los fármacos , Compuestos de Plata/farmacología , Compuestos de Plata/químicaRESUMEN
OBJECTIVE: To critically evaluate the literature and answer the question: "Is there an association between depression and temporomandibular disorder (TMD) in adults?" METHODS: The personalized search strategy was applied to PubMed, Embase, Web of Science, and Scopus databases. Articles were selected in two stages according to the eligibility criteria. The Joanna Briggs Institute (JBI) tool was used to analyze the risk of bias according to the type of study. RESULTS: The included articles presented a moderate risk of bias. Based on the studies, individuals with TMD have higher levels of depression compared to the control group. There is also a direct association in that individuals with depression are more susceptible to developing TMD. CONCLUSION: There is a probable association between depression and TMD in adults. However, more studies with high methodological quality are needed to confirm this finding.
RESUMEN
OBJECTIVE: To explore the effect of adding different percentages of nanostructured silver vanadate decorated with silver nanoparticles (ß-AgVO3) to dental porcelains, evaluating the antimicrobial activity and the influence on the mechanical properties. METHODS: Thirty-six specimens were made, for each concentration, control group, 0.5%, 1%, 2.5% and 5%, using two commercial brands: IPS InLine and Noritake Cerabien ZR. For the analysis of mechanical properties, the Vickers microhardness test and the roughness test were performed. For the antimicrobial analysis, the XTT and CFU assays were performed. RESULTS: There was a statistically significant difference between groups for mechanical and microbiological analyses. SIGNIFICANCE: The modification of dental porcelains, with the incorporation of ß-AgVO3, influenced the mechanical properties of the material and demonstrated antimicrobial activity at certain concentrations.