RESUMEN
A natural biosorbent obtained from Pyracantha coccinea was modified with an anionic surfactant to facilitate its dye removal ability. Modified biosorbent was successfully employed for the decolorization of Methyl Violet (MV)-contaminated solutions. A three-variable Box-Behnken design for response surface methodology was used to examine the function of independent operating variables. Optimum pH and biosorbent amount were found to be 6.0 and 0.055 g, respectively. The effects of temperature and ionic strength on the dye removal performance of biosorbent were also investigated. A biosorption equilibrium was attained within 30 min and experimental data fitted well to the pseudo-second-order model. The Langmuir isotherm model fitted adequately to the equilibrium data. The maximum monolayer biosorption capacity of the modified biosorbent was found to be 254.88 mg g(-1). Good biosorption yields were also recorded in continuous biosorption system. Ion exchange and complexation could be suggested as possible mechanisms for the biosorption. The developed modified biosorbent was regenerated up to 80.30 % by 0.005 M HCl. At real wastewater conditions, it has 86.23 ± 0.21 and 94.51 ± 1.09 % dye removal yields in batch and column systems, respectively. Modified biomaterial can be used as an effective biosorbent for the removal of MV dye from aqueous solution with high biosorption performance.
Asunto(s)
Violeta de Genciana/aislamiento & purificación , Preparaciones de Plantas/química , Contaminantes Químicos del Agua/aislamiento & purificación , Purificación del Agua/métodos , Adsorción , Concentración de Iones de Hidrógeno , Análisis Multivariante , Concentración Osmolar , Pyracantha/química , Dodecil Sulfato de Sodio/química , Propiedades de Superficie , Tensoactivos/química , TemperaturaRESUMEN
This study focused on the improvement of the decolorization potential of biomass derived from Pyracantha coccinea. Alkyl benyzldimethyl ammonium chloride (ABDAC) was used as modification agent. Batch mode decolorization potential of modified biosorbent was explored at different operating conditions. ABDAC modification significantly increased the biosorption yield to 97.27%, which was 3.88 times higher than that of natural biomass. The prepared biosorbent was effectively used for the decolorization of Reactive Red 45 contaminated solutions after the optimization of biosorption conditions. The non-linear regression analysis was used to evaluate the isotherm and kinetic model parameters. Process followed the Langmuir isotherm model and the highest monolayer capacity of 152.49 mg g(-1) was obtained with a small amount of modified biosorbent. Kinetic studies indicated fast decolorization rate of the process following the pseudo-first-order model. Biosorption performance of the prepared biosorbent was tested in RR45 containing real wastewater sample. The possible dye biosorbent interactions in the biosorption process were explored by zeta potential, scanning electron microscobe and FTIR analysis.