RESUMEN

Control of carbon fiber heteroatom (oxygen and nitrogen) functionalization using electrochemical oxidation is explored in a variety of electrolyte solutions. Results of X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy indicate that most electrolytes in aqueous and anodic conditions are limited to heteroatom surface content of no more than 13 atomic percent (at %) with a majority C-O and/or C-N moieties; the remaining moieties include an oxidative sequence of carbon (alcohol to ketone to carboxylate) and more complex O- and N-containing groups. The pH of the electrolyte solution was found to be crucial in controlling the ratio of the amount of oxygen to nitrogen functionalities, with the increased basicity of solution resulting in higher nitrogen deposition. The oxidative (and/or thermal) decomposition of many electrolytes during electrochemical treatment can have a major impact on functionalization through changes to pH. Oxidation of carbon fiber in some electrolyte solutions showed higher surface concentrations of heteroatoms (25-30 at %) than most electrolytes (13 at %). Mechanisms were proposed to explain how some electrolytes can exceed 13 at % of heteroatom deposition. Specifically, we hypothesized that electrolytes that contain organic ions with chelation capabilities and moieties that produce additional sites of functionalization can overcome that threshold.

RESUMEN

Multidentate hydrogen-bonding interactions are a promising strategy to improve underwater adhesion. Molecular and macroscale experiments have revealed an increase in underwater adhesion by incorporating multidentate H-bonding groups, but quantitatively relating the macroscale adhesive strength to cooperative hydrogen-bonding interactions remains challenging. Here, we investigate whether tridentate alcohol moieties incorporated in a model epoxy act cooperatively to enhance adhesion. We first demonstrate that incorporation of tridentate alcohol moieties leads to comparable adhesive strength with mica and aluminum in air and in water. We then show that the presence of tridentate groups leads to energy release rates that increase with an increase in crack velocity in air and in water, while materials lacking these groups do not display rate-dependent adhesion. We model the rate-dependent adhesion to estimate the activation energy of the interfacial bonds. Based on our data, we estimate the lifetime of these bonds to be between 2 ms and 6 s, corresponding to an equilibrium activation energy between 23kBT and 31kBT. These values are consistent with tridentate hydrogen bonding, suggesting that the three alcohol groups in the Tris moiety bond cooperatively form a robust adhesive interaction underwater.

RESUMEN

Polymers formed by ring-opening metathesis polymerization (ROMP) such as poly(dicyclopentadiene) (pDCPD) exhibit a technologically desirable combination of high toughness, high glass transition temperature, and outstanding low-temperature performance. However, because of their nonpolar molecular structure, they tend to suffer from relatively low elastic moduli and poor adhesion to common fillers, fibers, and substrates, limiting their utility as adhesives and composite binders without specialized bonding agents. Here, we investigate the mechanical properties of a pDCPD-based copolymer filled with well-defined spherical microparticles having four distinct surface chemistries capable of strong, moderate, or weak bonding to the matrix with surfaces ranging from polar to nonpolar. Measurements in uniaxial tension, quasi-static fracture, and high-velocity impact are complemented by digital image correlation (DIC), scanning electron microscopy (SEM) fractography, and X-ray computed tomography (X-µCT) of subcritically loaded crack tips, yielding insight into the complex roles played by interfacial bonding in strength, stiffness, and toughening mechanisms of an already tough polymer. Analysis using quantitative fracture and impact mechanism models provided valuable guidelines for designing heterogeneous systems that combine structural and tough performance.

RESUMEN

We developed an operationally simple electrolytic design for the surface treatment of short carbon fibers. Using X-ray photoelectron spectroscopy (XPS), we demonstrated that the electrochemical surface treatment of discontinuous fibers is highly reproducible, uniform, and tunable. Specifically, total amounts of surface oxygen and nitrogen contents (0 to 17 atomic %) as well as surface oxygen-to-nitrogen ratio (1:0 to 1:2) vary significantly over the ranges of each processing parameter: applied voltage (1.5-21 V), location of carbon fiber (i.e., anode, cathode, or mixed mode), initial temperature (3-70.5 °C), and ammonium bicarbonate concentration (0.005-0.75 M). Optimized processing conditions afforded carbon fibers that have similar surface compositions (86.3 ± 1.1 at. % C, 8.9 ± 0.8 at. % O, 4.7 ± 0.6 at. % N) as those of commercially available continuous fibers. In addition, these fibers retain their mechanical properties (tensile strength and tensile modulus) and exhibit no detectable surface damage based on single fiber tensile tests and scanning electron microscopy (SEM). We also performed a number of control experiments to develop a proposed mechanism for the surface functionalization of the carbon fiber. These mechanistic studies demonstrated that water splitting contributes significantly to the oxidation of carbon fibers and that other species in the chemical equilibria of ammonium bicarbonate (and not just its individual ions) play a significant role in functionalizing carbon fiber surfaces.

RESUMEN

Numerous studies have focused on the remarkable adhesive properties of polydopamine, which can bind to substrates with a wide range of surface energies, even under aqueous conditions. This behavior suggests that polydopamine may be an attractive option as a surface treatment in structural bonding applications, where good bond durability is required. Here, we assessed polydopamine as a surface treatment for bonding aluminum plates with an epoxy resin. A model epoxy adhesive consisting of diglycidyl ether of bisphenol A (DGEBA) and Jeffamine D230 polyetheramine was employed, and lap shear measurements (ASTM D1002 10) were made (i) under dry conditions to examine initial bond strength and (ii) after exposure to hot/wet (63 °C in water for 14 days) conditions to assess bond durability. Surprisingly, our results showed that polydopamine alone as a surface treatment provided no benefit beyond that obtained by exposing the substrates to an alkaline solution of tris buffer used for the deposition of polydopamine. This implies that polydopamine has a potential Achilles' heel, namely, the formation of a weak boundary layer that was identified using X-ray photoelectron spectroscopy (XPS) of the fractured surfaces. In fact, for longer deposition times (2.5 and 18 h), the tris buffer-treated surface outperformed the polydopamine surface treatments, suggesting that tris buffer plays a unique role in improving adhesive performance even in the absence of polydopamine. We further showed that the use of polydopamine-3-aminopropyltriethoxysilane (APTES) hybrid surface treatments provided significant improvements in bond durability at extended deposition times relative to both polydopamine and an untreated control.

Asunto(s)

RESUMEN

Polydopamine coatings are of interest due to the fact that they can promote adhesion to a broad range of materials and can enable a variety of applications. However, the polydopamine-substrate interaction is often noncovalent. To broaden the potential applications of polydopamine, we show the incorporation of 3-aminopropyltriethoxysilane (APTES), a traditional coupling agent capable of covalent bonding to a broad range of organic and inorganic surfaces, into polydopamine coatings. High energy X-ray photoelectron spectroscopy (HE-XPS), conventional XPS, near-edge X-ray absorption fine structure (NEXAFS), Fourier transform infrared-attenuated total reflectance (FTIR-ATR), and ellipsometry measurements were used to investigate changes in coating chemistry and thickness, which suggest covalent incorporation of APTES into polydopamine. These coatings can be deposited either in Tris buffer or by using an aqueous APTES solution as a buffer without Tris. APTES-dopamine hydrochloride deposition from solutions with molar ratios between 0:1 and 10:1 allowed us to control the coating composition across a broad range.

RESUMEN

The first catalytic asymmetric carboannulation with allylsilanes is presented. The enantioselective [3+2] annulation is catalyzed using a scandium(III)/indapybox complex with tetrakis-[3,5-bis(trifluoromethyl)phenyl]-borate (BArF) to enhance catalytic activity and control stereoselectivity. Functionalized cyclopentanes containing a quaternary carbon center are derived from alkylidene oxindole, coumarin, and malonate substrates with high stereoselectivity. The enantioselective 1,4-conjugate addition and enantioselective lactone formation (by trapping of the ß-silyl carbocation) is also described.

Asunto(s)

RESUMEN

X-ray crystallography showcases the distinct self-association and hydrogen-bonding patterns of organic silanediols, R2Si(OH)2, with bifunctional heterocycles for supramolecular assembly. Diffusion-ordered spectroscopy (DOSY) studies identify the dominant hydrogen-bonding patterns and structures in solution, which correlate with solid-state patterns at high concentrations.

RESUMEN

The scandium(III)-catalyzed enantioselective Hosomi-Sakurai allylation of isatins with various substituted allylic silanes is described. A catalyst loading as low as 0.05 mol % is utilized at room temperature to afford the 3-allyl-3-hydroxy-2-oxindoles in excellent yields and enantioselectivity up to 99% ee, including a demonstration of a gram-scale reaction. The effects of additives and varying silyl groups were explored to demonstrate the scope and application.

Asunto(s)

RESUMEN

The importance of cooperative hydrogen-bonding effects and SiOH-acidification is described for silanediol catalysis. NMR binding, X-ray, and computational studies provide support for a unique dimer resulting from silanediol self-recognition. The significance of this cooperative hydrogen-bonding is demonstrated using novel fluorinated silanediol catalysts for the addition of indoles and N,N-dimethyl-m-anisidine to trans-ß-nitrostyrene.

RESUMEN

The fundamental properties of a series of organic monosilanols, silanediols, disiloxanediols, and known hydrogen-bonding organocatalysts have been examined in the gas phase using computational and experimental mass spectrometry methods. The organosilicon diol molecules contain dual hydrogen-bonding groups that were designed as potential hosts and hydrogen-bonding catalysts. Newly measured acidities are reported, and implications regarding solvent effects, catalysis, and molecular recognition are discussed.

RESUMEN

By judicious selection of crystallization conditions, it has been possible to obtain the salts of a common building block, [(RNC)4Rh(I)]+, in single-crystal form suitable for X-ray diffraction. Salts that contain a single type of cation include deep green [(C6H11NC)12Rh(I)3](SbF6)3, deep green [(C6H11NC)12Rh(I)3](AsF6)3, and straw yellow [(C6H11NC)8Rh(II)2Cl2](BF4)2 (in addition to the previously isolated trimeric deep green [(i-PrNC)12RhI3]Cl3 x 4.5 H2O, monomeric, [(C6H11NC)4 Rh(I)](BPh4), and [(i-PrNC)4Rh(I)](BPh4) (both yellow), and red, dimeric [(C6H11NC)8Rh(I)2]Cl2 x 0.5C6H6 x 2H2O). Ordered crystals of [(C6H11NC)12Rh(I)3](SbF6)3 contain linear Rh3 units, while those of [(C6H11NC)12Rh(I)3](AsF6)3 show disorder which is consistent with the presence of linear or bent Rh3 units. The formation of green [(C6H11NC)12Rh(V/III)3Cl2][(C6H11NC)12Rh(I)3]Cl6, and brown [(C6H11NC)12Rh(V/III)3Cl2][(C6H11NC)8Rh(I)2][(C6H11NC)4RhI]Cl6 x 16H2O x 3C6H6 along with unidentified red-brown cubes from an air-exposed solution of [(C6H11NC)4Rh(I)]Cl is reported. As their formulas indicate, green [(C6H11NC)12Rh(V/III)3Cl2][(C6H11NC)12Rh(I)3]Cl6, and brown [(C6H11NC)12Rh(V/III)3Cl2][(C6H11NC)8Rh(I)2][(C6H11NC)8Rh(I)]Cl6 x 16H2O x 3C6H6 contain two or three chemically distinct cations, respectively, but again are built from a common precursor, [(C6H11NC)4Rh(I)]+.

RESUMEN

DFT methods were used to elucidate features of coordination environment of Pd(II) that could enable Ar-F reductive elimination as an elementary C-F bond-forming reaction potentially amenable to integration into catalytic cycles for synthesis of organofluorine compounds with benign stoichiometric sources of F(-). Three-coordinate T-shaped geometry of Pd(II)Ar(F)L (L = NHC, PR(3)) was shown to offer kinetics and thermodynamics of Ar-F elimination largely compatible with synthetic applications, whereas coordination of strong fourth ligands to Pd or association of hydrogen bond donors with F each caused pronounced stabilization of Pd(II) reactant and increased activation barrier beyond the practical range. Decreasing donor ability of L promotes elimination kinetics via increasing driving force and para-substituents on Ar exert a sizable SNAr-type TS effect. Synthesis and characterization of the novel [Pd(C(6)H(4)-4-NO(2))ArL(mu-F)](2) (L = P(o-Tolyl)(3), 17; P(t-Bu)(3), 18) revealed stability of the fluoride-bridged dimer forms of the requisite Pd(II)Ar(F)L as the key remaining obstacle to Ar-F reductive elimination in practice. Interligand steric repulsion with P(t-Bu)(3) served to destabilize dimer 18 by 20 kcal/mol, estimated with DFT relative to PMe(3) analog, yet was insufficient to enable formation of greater than trace quantities of Ar-F; C-H activation of P(t-Bu)(3) followed by isobutylene elimination was the major degradation pathway of 18 while Ar/F- scrambling and Ar-Ar reductive elimination dominated thermal decomposition of 17. However, use of Buchwald's L = P(C(6)H(4)-2-Trip)(t-Bu)(2) provided the additional steric pressure on the [PdArL(mu-F)](2) core needed to enable formation of aryl-fluoride net reductive elimination product in quantifiable yields (10%) in reactions with both 17 and 18 at 60 degrees over 22 h.

RESUMEN

Trimeric green [(i-PrNC)12Rh(I)3]Cl3.4.5H2O, monomeric [(C6H11NC)4Rh(I)](BPh4) and [(i-PrNC)4Rh(I)](BPh4) (both yellow), and red, dimeric [(C6H11NC)8Rh(I)2]Cl2.0.5C6H6.2H2O have been crystallized.