RESUMEN
The use of cork granules for cleaning up crude oil or oil derivative spills and further oil recovery appears as a promising option due to their unique properties, which allow a high oil sorption capacity, low water pickup and excellent reuse. The present work reports the effect of oil viscosity on cork sorption capacity by using five types of oils (lubricating oil, 5.7 goil gcork-1; heavy oil, 4.2 goil gcork-1; light oil, 3.0 goil gcork-1; biodiesel, 2.6 goil gcork-1; and diesel, 2.0 goil gcork-1). The cork sorption capacity for light petroleum was also evaluated as a function of temperature and sorbent particle size. Additionally, improvements on oil recovery from cork sorbents by a mechanical compression process have been achieved as a result of a design of experiments (DOE) using the response surface methodology. Such statistical technique provided remarkable results in terms of cork sorbent reusability, as the oil sorption capacity was preserved after 30 cycles of sorption-squeezing steps. The sorbed oils could be removed from the sorbent surface, collected simply by squeezing the cork granules and further reused. The best operational region yielded near 80% oil recovery, using a cork mass of 8.85 g (particle size of 2.0-4.0 mm) loaded with 43.5 mL of lubricating oil, at 5.4 bar, utilising two compressions with a duration of 2 min each. Graphical abstract.
Asunto(s)
Restauración y Remediación Ambiental/métodos , Contaminación por Petróleo/análisis , Petróleo , Contaminantes Químicos del Agua/análisis , Adsorción , Aceites , Tamaño de la Partícula , Agua , Purificación del Agua/métodosRESUMEN
The original publication of this paper contains a mistake.
RESUMEN
Rhodococcus sp. has a broad catabolic diversity and unique enzymatic capabilities, and it is able to adapt under extreme conditions. Thereby, the production of this remarkable bacterium has a great biotechnological and industrial importance. In this sense, we sought to improve the R. erythropolis ATCC 4277 growth through a central composite design, by varying the components of nutrient medium (glucose, malt extract, yeast extract, CaCO3), temperature, and agitation. It was found that the concentrations of glucose and malt extract are not statistically significant, being reduced of 4.0 and 10.0 g L-1 to 2.0 and 5.0 g L-1, respectively. The CaCO3 concentration and temperature were also diminished of 2.0 to 1.16 g L-1and 28 to 23.7 °C, respectively. Optimal growth conditions provided a 240% increase in final biomass concentration, an increment in specific growth rate, and a growth yield coefficient about five times greater. Application of the optimal conditions in biodesulfurization and biodenitrogenation processes showed that desulfurization capability is not associated with optimal growth conditions; however, it was achieved a 47% of nitrogen removal in the assay containing 10% (w/w) of heavy gas oil. Graphical Abstract á .