RESUMEN

Dry granulation is an indispensable process used to improve the flow property of moisture-sensitive materials. Considering the limitations of currently available dry granulation techniques, it is necessary to develop a novel technique. In this study, a twin-screw dry granulation (TSDG) technology was successfully applied to produce a sustained-release dry granule formulation, which was subsequently compressed into sustained-release tablets. Based on a preliminary study, theophylline was selected as model drug, Klucel™ EF, Ethocel™, and magnesium stearate were selected as excipients. A Resolution V Irregular Fraction Design was applied to determine the effect of different processing parameters (screw speed, feeding rate, barrel temperature, and screw configuration) on product properties (flow properties, particle size distribution, and dissolution time). A reliable model was achieved by combining the data obtained, and processing parameters were automatically optimized to attain the setting goal. In general, TSDG was demonstrated to be an alternative method for the preparation of dry granules. The continuous processing nature, simplicity of operation, and ease of optimization made TSDG competitive compared with other conventional dry granulation techniques.

Asunto(s)

Desecación/métodos , Composición de Medicamentos/métodos , Excipientes/química , Teofilina/química , Química Farmacéutica/instrumentación , Química Farmacéutica/métodos , Preparaciones de Acción Retardada/química , Preparaciones de Acción Retardada/farmacocinética , Desecación/instrumentación , Composición de Medicamentos/instrumentación , Liberación de Fármacos , Estudios de Factibilidad , Tamaño de la Partícula , Solubilidad , Comprimidos , Temperatura , Resistencia a la Tracción , Teofilina/farmacocinética

RESUMEN

The objective of this work was to use hot-melt extrusion (HME) technology to improve the physiochemical properties of lansoprazole (LNS) to prepare stable enteric coated LNS tablets. For the extrusion process, we chose Kollidon® 12 PF (K12) polymeric matrix. Lutrol® F 68 was selected as the plasticizer and magnesium oxide (MgO) as the alkalizer. With or without the alkalizer, LNS at 10% drug load was extruded with K12 and F68. LNS changed to the amorphous phase and showed better release compared to that of the pure crystalline drug. Inclusion of MgO improved LNS extrudability and release and resulted in over 80% drug release in the buffer stage. Hot-melt extruded LNS was physically and chemically stable after 12 months of storage. Both formulations were studied for compatibility with Eudragit® L100-55. The optimized formulation was compressed into a tablet followed by coating process utilizing a pan coater using L100-55 as an enteric coating polymer. In a two-step dissolution study, the release profile of the enteric coated LNS tablets in the acidic stage was less than 10% of the LNS, while that in the buffer stage was more than 80%. Drug content analysis revealed the LNS content to be 97%, indicating the chemical stability of the enteric coated tablet after storage for six months. HME, which has not been previously used for LNS, is a valuable technique to reduce processing time in the manufacture of enteric coated formulations of an acid-sensitive active pharmaceutical ingredient as compared to the existing methods.

Asunto(s)

Lansoprazol/química , Comprimidos Recubiertos/química , Rastreo Diferencial de Calorimetría/métodos , Química Farmacéutica/métodos , Estabilidad de Medicamentos , Excipientes/química , Plastificantes/química , Polietilenglicoles/química , Polímeros/química , Povidona/química , Solubilidad/efectos de los fármacos , Tecnología Farmacéutica

RESUMEN

This study aimed to investigate the combined effect of magnesium oxide (MgO) as an alkalizer and polyethylene glycol (PEG) as a plasticizer and wetting agent in the presence of Kollidon® 12 PF and 17 PF polymer carriers on the release profile of mefenamic acid (MA), which was prepared via hot-melt extrusion technique. Various drug loads of MA and various ratios of the polymers, PEG 3350 and MgO were blended using a V-shell blender and extruded using a twin-screw extruder (16-mm Prism EuroLab, ThermoFisher Scientific, Carlsbad, CA) at different screw speeds and temperatures to prepare a solid dispersion system. Differential scanning calorimetry and X-ray diffraction data of the extruded material confirmed that the drug existed in the amorphous form, as evidenced by the absence of corresponding peaks. MgO and PEG altered the micro-environmental pH to be more alkaline (pH 9) and increased the hydrophilicity and dispersibility of the extrudates to enhance MA solubility and release, respectively. The in vitro release study demonstrated an immediate release for 2 h with more than 80% drug release within 45 min in matrices containing MgO and PEG in combination with polyvinylpyrrolidone when compared to the binary mixture, physical mixture and pure drug.

Asunto(s)

Composición de Medicamentos , Óxido de Magnesio , Ácido Mefenámico , Polietilenglicoles , Rastreo Diferencial de Calorimetría , Química Farmacéutica , Portadores de Fármacos , Calor , Solubilidad

RESUMEN

Developing a pediatric oral formulation with an age-appropriate dosage form and taste masking of naturally bitter active pharmaceutical ingredients (APIs) are key challenges for formulation scientists. Several techniques are used for taste masking of bitter APIs to improve formulation palatability; however, not all the techniques are applicable to pediatric dosage forms because of the limitations on the kind and concentration of the excipients that can be used. Hot-melt extrusion (HME) technology is used successfully for taste masking of bitter APIs and overcomes some of the limitations of the existing taste-masking techniques. Likewise, analytical taste assessment is an important quality control parameter evaluated by several in vivo and in vitro methods, such as the human taste panel, electrophysiological methods, electronic sensor, and animal preference tests to aid in selecting a taste-masked formulation. However, the most appropriate in vivo method to assess the taste-masking efficacy of pediatric formulations remains unknown because it is not known to what extent the human taste panel/electronic tongue can predict the palatability in the pediatric patients. The purpose of this study was to develop taste-masked caffeine citrate extrudates via HME and to demonstrate the wide applicability of a single bottle-test rat model to record and compare the volume consumed of the taste-masked solutions to that of the pure API. Thus, this rat model can be considered as a low-cost alternative taste-assessment method to the most commonly used expensive human taste panel/electronic tongue method for pediatric formulations.

Asunto(s)

Cafeína/administración & dosificación , Cafeína/química , Citratos/administración & dosificación , Citratos/química , Gusto/fisiología , Administración Oral , Animales , Química Farmacéutica/métodos , Nariz Electrónica , Excipientes/química , Humanos , Masculino , Pediatría , Control de Calidad , Ratas , Ratas Sprague-Dawley , Soluciones/química , Tecnología Farmacéutica/métodos

RESUMEN

The main objective of this work was to explore the potential of coupling fused deposition modeling in three-dimensional (3D) printing with hot-melt extrusion (HME) technology to facilitate additive manufacturing, in order to fabricate tablets with enhanced extended release properties. Acetaminophen was used as the model drug and different grades and ratios of polymers were used to formulate tablets. Three-point bending and hardness tests were performed to determine the mechanical properties of the filaments and tablets. 3D-printed tablets, directly compressed mill-extruded tablets, and tablets prepared from a physical mixture were evaluated for drug release rates using a USP-II dissolution apparatus. The surface and cross-sectional morphology of the 3D-printed tablets were assessed by scanning electron microscopy. Differential scanning calorimetry and thermogravimetric analysis were used to characterize the crystal states and thermal properties of materials, respectively. The 3D-printed tablets had smooth surfaces and tight structures; therefore, they showed better extended drug release rates than the directly compressed tablets did. Further, this study clearly demonstrated the feasibility of coupling HME with 3D printing technology, which allows for the formulation of drug delivery systems using different grades and ratios of pharmaceutical polymers. In addition, formulations can be made based on the personal needs of patients.

Asunto(s)

Preparaciones de Acción Retardada/química , Comprimidos/química , Acetaminofén/química , Química Farmacéutica/métodos , Sistemas de Liberación de Medicamentos/métodos , Liberación de Fármacos , Polímeros/química , Impresión Tridimensional , Tecnología Farmacéutica/métodos

RESUMEN

OBJECTIVE To evaluate pharmacokinetics and bioavailability after administration of ceftiofur hydrochloride and ceftiofur sodium to water buffalo (Bubalus bubalis). ANIMALS 5 healthy adult water buffalo (3 males and 2 nonlactating females). PROCEDURES All animals received a dose (2.2 mg/kg) of 3 ceftiofur products (2 commercially available suspensions of ceftiofur hydrochloride [CEF1 and CEF2, IM] and ceftiofur sodium [CEF3, IV]). Blood samples were collected for up to 196 hours. Concentrations of ceftiofur in plasma were determined by use of high-performance liquid chromatography, and pharmacokinetic parameters were calculated on the basis of noncompartmental methods. RESULTS Most of the pharmacokinetic parameters, except for bioavailability and the area under the concentration-time curve extrapolated to infinity, were significantly different between the 2 products administered IM. Mean ± SD bioavailability of CEF1 and CEF2 was 89.57 ± 32.84% and 86.28 ± 11.49%, respectively, which indicated good absorption of both products. In addition, there was a longer drug residence time for CEF1 than for CEF2. Data analysis for CEF1 revealed a flip-flop phenomenon. CONCLUSIONS AND CLINICAL RELEVANCE In this study, there was good absorption of CEF1, and CEF1 had a longer drug residence time in vivo than did CEF2. On the basis of pharmacokinetic parameters and the in vitro antimicrobial susceptibility, a dosage regimen of 2.2 mg/kg administered at 48- and 36-hour intervals for CEF1 and CEF2, respectively, could be an appropriate choice for the treatment of buffalo with infectious diseases.

Asunto(s)

Antibacterianos/farmacocinética , Búfalos/sangre , Cefalosporinas/farmacocinética , Animales , Antibacterianos/administración & dosificación , Antibacterianos/sangre , Antibacterianos/química , Disponibilidad Biológica , Búfalos/metabolismo , Cefalosporinas/administración & dosificación , Cefalosporinas/sangre , Cefalosporinas/química , Cromatografía Líquida de Alta Presión , Femenino , Masculino , Plasma , Suspensiones

RESUMEN

The aim of this study was to formulate face-cut, melt-extruded pellets, and to optimize hot melt process parameters to obtain maximized sphericity and hardness by utilizing Soluplus(®) as a polymeric carrier and carbamazepine (CBZ) as a model drug. Thermal gravimetric analysis (TGA) was used to detect thermal stability of CBZ. The Box-Behnken design for response surface methodology was developed using three factors, processing temperature ( °C), feeding rate (%), and screw speed (rpm), which resulted in 17 experimental runs. The influence of these factors on pellet sphericity and mechanical characteristics was assessed and evaluated for each experimental run. Pellets with optimal sphericity and mechanical properties were chosen for further characterization. This included differential scanning calorimetry, drug release, hardness friability index (HFI), flowability, bulk density, tapped density, Carr's index, and fourier transform infrared radiation (FTIR) spectroscopy. TGA data showed no drug degradation upon heating to 190 °C. Hot melt extrusion processing conditions were found to have a significant effect on the pellet shape and hardness profile. Pellets with maximum sphericity and hardness exhibited no crystalline peak after extrusion. The rate of drug release was affected mainly by pellet size, where smaller pellets released the drug faster. All optimized formulations were found to be of superior hardness and not friable. The flow properties of optimized pellets were excellent with high bulk and tapped density.

Asunto(s)

Carbamazepina/química , Liberación de Fármacos/efectos de los fármacos , Polietilenglicoles/química , Polímeros/química , Estabilidad de Medicamentos , Calor , Tamaño de la Partícula , Polivinilos/química , Espectroscopía Infrarroja por Transformada de Fourier

RESUMEN

INTRODUCTION: Hot-melt extrusion (HME) technology is applied successfully in the plastic, rubber and food industry. HME has also emerged as an important technology for drug delivery applications in pharmaceutical research and manufacturing because of its process automation and low-cost scale-up properties, which reduce labor costs and capital investment. There are a number of commercial FDA-approved HME-derived products, signifying the commercial feasibility of this novel technique in drug delivery applications. HME is a highly efficient, solvent-free continuous processing technique for the development of solid dispersions; thus, research efforts to develop sustained, modified and targeted drug delivery systems to improve the solubility and bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs) are of interest. AREAS COVERED: This review focuses on both the innovations and applications of HME in the production of pharmaceutical formulations, and on the significant findings of the general principles regarding formulation and process development via HME as described in published articles. EXPERT OPINION: Challenges faced by pharmaceutical companies to produce efficient drug formulations may be partly overcome by HME's advantages - high drug-loading capacity, good content uniformity, cost-effectiveness, and ease of processing scale-up. Nevertheless, HME's high processing temperatures may be an obstacle if adequate knowledge about the product's formulation is lacking.

Asunto(s)

Sistemas de Liberación de Medicamentos , Preparaciones Farmacéuticas/administración & dosificación , Tecnología Farmacéutica/métodos , Disponibilidad Biológica , Química Farmacéutica/métodos , Calor , Solubilidad

RESUMEN

Hot-melt extrusion (HME) is a promising technology for the production of new chemical entities in the developmental pipeline and for improving products already on the market. In drug discovery and development, industry estimates that more than 50% of active pharmaceutical ingredients currently used belong to the biopharmaceutical classification system II (BCS class II), which are characterized as poorly water-soluble compounds and result in formulations with low bioavailability. Therefore, there is a critical need for the pharmaceutical industry to develop formulations that will enhance the solubility and ultimately the bioavailability of these compounds. HME technology also offers an opportunity to earn intellectual property, which is evident from an increasing number of patents and publications that have included it as a novel pharmaceutical formulation technology over the past decades. This review had a threefold objective. First, it sought to provide an overview of HME principles and present detailed engineered extrusion equipment designs. Second, it included a number of published reports on the application of HME techniques that covered the fields of solid dispersions, microencapsulation, taste masking, targeted drug delivery systems, sustained release, films, nanotechnology, floating drug delivery systems, implants, and continuous manufacturing using the wet granulation process. Lastly, this review discussed the importance of using the quality by design approach in drug development, evaluated the process analytical technology used in pharmaceutical HME monitoring and control, discussed techniques used in HME, and emphasized the potential for monitoring and controlling hot-melt technology.

Asunto(s)

Química Farmacéutica/métodos , Preparaciones Farmacéuticas/química , Tecnología Farmacéutica/métodos , Disponibilidad Biológica , Sistemas de Liberación de Medicamentos/métodos , Industria Farmacéutica/métodos , Diseño de Equipo/métodos , Calor , Solubilidad

RESUMEN

BACKGROUND: Bitter tasting drugs represent a large portion of active pharmaceutical ingredients. Mini-tablets are specifically designed for patients with difficulty in swallowing particular in young children up to 10 years of age, geriatric patients and patients with esophagitis. OBJECTIVE: The present study was aimed to prepare, taste-masked mini-tablets, which are easily swallowed dosage forms, primarily to be used by pediatric and geriatric patients. METHODS: Ketoprofen (10%-50% w/w) and Eudragit® EPO were blended and extruded with a 5-mm strand die and cut into consistent mini-tablets by using an adapted downstream pelletizer. RESULTS: Differential scanning calorimetry and polarized light microscopy-hot stage microscopy studies confirmed that the binary mixtures were miscible under the employed extrusion temperatures. In-vitro release studies showed that drug release was less than 0.5% within the first 2 min in simulated salivary fluid (pH 6.8) and more than 90% in the first 20 min in gastric media (pH 1.0). The results of the electronic tongue analysis were well correlated with the drug release profile of the mini-tablets in the artificial saliva. Scanning electron microscopy revealed no cracks on the surface of the minitablets, confirming that the mini-tablets were compact solids. Chemical imaging confirmed the uniform distribution of ketoprofen inside the polymer matrices. CONCLUSION: Eudragit® EPO containing ketoprofen at various drug loads were successfully melt extruded into tastedmasked mini-tablets. The reduced drug release at salivary pH correlated well with Astree e-Tongue studies for taste masking efficiency.

Asunto(s)

Antiinflamatorios no Esteroideos/química , Excipientes/química , Cetoprofeno/química , Ácidos Polimetacrílicos/química , Tecnología Farmacéutica/métodos , Administración Oral , Antiinflamatorios no Esteroideos/administración & dosificación , Técnicas Biosensibles/instrumentación , Rastreo Diferencial de Calorimetría , Cristalografía por Rayos X , Preparaciones de Acción Retardada , Composición de Medicamentos , Nariz Electrónica , Jugo Gástrico/química , Humanos , Concentración de Iones de Hidrógeno , Cetoprofeno/administración & dosificación , Cinética , Microscopía Electrónica de Rastreo , Microscopía de Polarización , Difracción de Polvo , Saliva/química , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Comprimidos , Gusto , Tecnología Farmacéutica/instrumentación , Temperatura

RESUMEN

Commercially available domperidone orodispersible tablets (ODT) are intended for immediate release of the drug, but none of them have been formulated for sustained action. The aim of the present research work was to develop and evaluate orodispersible sustained release tablet (ODT-SR) of domperidone, which has the convenience of ODT and benefits of controlled release product combined in one. The technology comprised of developing sustained release microspheres (MS) of domperidone, followed by direct compression of MS along with suitable excipients to yield ODT-SR which rapidly disperses within 30 seconds and yet the dispersed MS maintain their integrity to have a sustained drug release. The particle size of the MS was optimized to be less than 200 µm to avoid the grittiness in the mouth. The DSC thermograms of MS showed the absence of drug-polymer interaction within the microparticles, while SEM confirmed their spherical shape and porous nature. Angle of repose, compressibility and Hausner's ratio of the blend for compression showed good flowability and high percent compressibility. The optimized ODT-SR showed disintegration time of 21 seconds and matrix controlled drug release for 9 h. In-vivo pharmacokinetic studies in Wistar rats showed that the ODT-SR had a prolonged MRT of 11.16 h as compared 3.86 h of conventional tablet. The developed technology is easily scalable and holds potential for commercial exploitation.

Asunto(s)

Preparaciones de Acción Retardada/química , Domperidona/química , Comprimidos/química , Administración Oral , Animales , Química Farmacéutica/métodos , Composición de Medicamentos/métodos , Liberación de Fármacos , Excipientes/química , Dureza , Microesferas , Tamaño de la Partícula , Polímeros/química , Ratas , Ratas Wistar

RESUMEN

Ointments are generally prepared either by fusion or by levigation methods. The current study proposes the use of hot-melt extrusion (HME) processing for the preparation of a polyethylene glycol base ointment. Lidocaine was used as a model drug. A modified screw design was used in this process, and parameters such as feeding rate, barrel temperature, and screw speed were optimized to obtain a uniform product. The product characteristics were compared with an ointment of similar composition prepared by conventional fusion method. The rheological properties, drug release profile, and texture characteristics of the hot-melt extruded product were similar to the conventionally prepared product. This study demonstrates a novel application of the hot-melt extrusion process in the manufacturing of topical semi-solids.

Asunto(s)

Química Farmacéutica/métodos , Composición de Medicamentos/métodos , Pomadas/química , Portadores de Fármacos/química , Liberación de Fármacos , Calor , Reología

RESUMEN

Over the past few decades, nanocrystal formulations have evolved as promising drug delivery systems owing to their ability to enhance the bioavailability and maintain the stability of poorly water-soluble drugs. However, conventional methods of preparing nanocrystal formulations, such as spray drying and freeze drying, have some drawbacks including high cost, time and energy inefficiency, traces of residual solvent, and difficulties in continuous operation. Therefore, new techniques for the production of nanocrystal formulations are necessary. The main objective of this study was to introduce a new technique for the production of nanocrystal solid dispersions (NCSDs) by combining high-pressure homogenization (HPH) and hot-melt extrusion (HME). Efavirenz (EFZ), a Biopharmaceutics Classification System class II drug, which is used for the treatment of human immunodeficiency virus (HIV) type I, was selected as the model drug for this study. A nanosuspension (NS) was first prepared by HPH using sodium lauryl sulfate (SLS) and Kollidon® 30 as a stabilizer system. The NS was then mixed with Soluplus® in the extruder barrel, and the water was removed by evaporation. The decreased particle size and crystalline state of EFZ were confirmed by scanning electron microscopy, zeta particle size analysis, and differential scanning calorimetry. The increased dissolution rate was also determined. EFZ NCSD was found to be highly stable after storage for 6 months. In summary, the conjugation of HPH with HME technology was demonstrated to be a promising novel method for the production of NCSDs.

Asunto(s)

Química Farmacéutica/métodos , Composición de Medicamentos/métodos , Nanopartículas/química , Alquinos , Benzoxazinas/química , Rastreo Diferencial de Calorimetría/métodos , Ciclopropanos , Portadores de Fármacos/química , Estabilidad de Medicamentos , Liofilización/métodos , Calor , Tamaño de la Partícula , Polietilenglicoles/química , Polivinilos/química , Povidona/química , Solubilidad , Suspensiones/química , Agua/química

RESUMEN

OBJECTIVE: The aim of this study was to evaluate the effect of polymer carrier, hot melt extrusion and downstream processing parameters on the water uptake properties of amorphous solid dispersions. METHODS: Three polymers and a model drug were used to prepare amorphous solid dispersions utilizing the hot melt extrusion technology. The sorption-desorption isotherms of solid dispersions and their physical mixtures were measured by the dynamic vapour sorption system, and the effects of polymer hydrophobicity, hygroscopicity, molecular weight and the hot melt extrusion process were investigated. Fourier transform infrared (FTIR) imaging was performed to understand the phase separation driven by the moisture. KEY FINDINGS: Solid dispersions with polymeric carriers with lower hydrophilicity, hygroscopicity and higher molecular weight could sorb less moisture under the high relative humidity (RH) conditions. The water uptake ability of polymer-drug solid dispersion systems were decreased compared with the physical mixture after hot melt extrusion, which might be due to the decreased surface area and porosity. The FTIR imaging indicated that the homogeneity of the drug molecularly dispersed within the polymer matrix was changed after exposure to high RH. CONCLUSION: Understanding the effect of formulation and processing on the moisture sorption properties of solid dispersions is essential for the development of drug products with desired physical and chemical stability.

Asunto(s)

Fenofibrato/química , Calor , Polímeros/química , Tecnología Farmacéutica/métodos , Agua/química , Absorción Fisicoquímica , Celulosa/análogos & derivados , Celulosa/química , Composición de Medicamentos , Interacciones Hidrofóbicas e Hidrofílicas , Peso Molecular , Polietilenglicoles/química , Espectroscopía Infrarroja por Transformada de Fourier , Humectabilidad

RESUMEN

Floating dosage forms are an important formulation strategy for drugs with a narrow absorption window and low intestinal solubility, and for localized gastric treatment. Novel floating pellets were prepared using the hot-melt extrusion (HME) technology. Uniformly foamed strands were created by liquid injection pumping and screw configuration modification. The ammonio methacrylate copolymer (Eudragit® RSPO) foaming structure was formed by a liquid-vapor phase transition inside the strand upon die exiting resulting from the sudden decrease in external pressure, vaporizing the liquid ethanol and vacating the extruded material. This generated uniform vacuous regions in the extrudate. The pellets' internal structure was investigated using scanning electron microscopy (SEM). The formulation constituents' and processing parameters' effects on the drug release profiles, floating force, and the pellets' micromeritic properties were evaluated by design of experiments: all formulations showed zero lag time and excellent floating strength, indicating immediate-floating pellet formation. The pellets' drug release profiles were controlled by multiple independent variables at different time points (⩽ 24 h). Drug loading significantly affected drug release within the first hour, the hydroxypropyl methylcellulose (HPMC) content thereafter. Understanding the variables' effects on the formulations allows for the tailoring of this delivery system to obtain various drug release profiles.

Asunto(s)

Preparaciones de Acción Retardada , Tecnología Farmacéutica , Solubilidad , Temperatura , Teofilina/administración & dosificación , Teofilina/química , Difracción de Rayos X

RESUMEN

The objective of this study was to investigate the extrudability, drug release, and stability of fenofibrate (FF) formulations utilizing various hot-melt extrusion processing parameters and polyvinylpyrrolidone (PVP) polymers of various molecular weights. The different PVP grades selected for this study were Kollidon® 12 PF (K12), Kollidon® 30 (K30), and Kollidon® 90 F (K90). FF was extruded with these polymers at three drug loadings (15%, 25%, and 35% w/w). Additionally, for FF combined with each of the successfully extruded PVP grades (K12 and K30), the effects of two levels of processing parameters for screw design, screw speed, and barrel temperature were assessed. It was found that the FF with (K90) was not extrudable up to 35% drug loading. With low drug loading, the polymer viscosity significantly influenced the release of FF. The crystallinity remaining was vital in the highest drug-loaded formulation dissolution profile, and the glass transition temperature of the polymer significantly affected its stability. Modifying the screw configuration resulted in more than 95% post-extrusion drug content of the FF-K30 formulations. In contrast to FF-K30 formulations, FF release and stability with K12 were significantly influenced by the extrusion temperature and screw speed.

RESUMEN

The present study aimed to evaluate the effect of degassing on an extrusion process, with respect to extrudate quality and drug release properties. Processed formulations were extruded with and without a degassing vent port at various locations along the barrel. All the experiments were performed under constant processing temperature, feeding rate, and screw speed. During the extrusion process, torque and pressure were monitored and recorded. The degassing process was beneficial when used over a conveying section after a mixing section. This is attributed to the large surface area available on the conveying elements, which minimizes the internal volume of the processed material, thereby facilitating the escape of entrapped gases. Degassing enhanced the homogeneity, physical appearance, and drug release properties of all the formulations. Furthermore, the degassing process also enhanced the cross-sectional uniformity of the extruded material, which is beneficial for visual monitoring during processing. Degassing considerably reduced the post-extrusion moisture content of Formula D3, which contains the highly hygroscopic polymer Kollidon® 17 PF, suggesting that the greatest influence of this process is on hygroscopic materials. The reduction in post-extrusion moisture content resulting from the inclusion of a degassing vent port, reduced fluctuations in the values of in-line monitoring parameters such as pressure and torque. Employing a degassing unit during hot-melt extrusion processing could help increase process efficacy and product quality.

Asunto(s)

Tecnología Farmacéutica/métodos , Química Farmacéutica , Estabilidad de Medicamentos , Congelación , Gases , Calor , Espectroscopía Infrarroja por Transformada de Fourier

RESUMEN

γ-Tocotrienol and oridonin are natural phytochemicals that display potent anticancer activity. Studies showed that combined treatment with subeffective doses of γ-tocotrienol with oridonin resulted in synergistic autophagic and apoptotic effects in malignant +SA, but not normal CL-S1 mouse mammary epithelial cells in vitro. Specifically, combined treatment with low doses of γ-tocotrienol (8 µM) and oridonin (2 µM) for 24 h resulted in synergistic inhibition of +SA mammary cancer cells viability. This combination significantly enhanced the expression of autophagy cellular markers including the conversion of LC3B-I to LC3B-II, beclin-1, Atg3, Atg7, Atg5-Atg12, LAMP-1 and cathepsin-D, and pretreatment with the autophagy inhibitors 3-methyladenine (3-MA) or bafilomycin A1 (Baf1) blocked these effects. Furthermore, blockade of γ-tocotrienol and oridonin-induced autophagy with 3-MA or Baf1 induced a modest, but significant reduction in cytotoxicity resulting from the combined treatment of these phytochemicals. The anticancer effects of combination treatment was also associated with a large suppression in Akt/mTOR mitogenic signaling and corresponding increase in the levels of apoptotic cellular marker including cleaved caspase-3 and PARP, and Bax/Bcl-2 ratio in these tumor cells. These effects were also found to be selective against cancer cells, since similar combined treatment with γ-tocotrienol and oridonin did not induce autophagy or reduce viability of normal mouse CL-S1 mammary epithelial cells. These findings indicate that combined γ-tocotrienol and oridonin-induced autophagy plays a role in mediating the synergistic anticancer effects of these phytochemicals.

Asunto(s)

Antineoplásicos Fitogénicos/farmacología , Neoplasias de la Mama/tratamiento farmacológico , Cromanos/farmacología , Diterpenos de Tipo Kaurano/farmacología , Vitamina E/análogos & derivados , Animales , Protocolos de Quimioterapia Combinada Antineoplásica , Autofagia/efectos de los fármacos , Biomarcadores/metabolismo , Neoplasias de la Mama/metabolismo , Línea Celular , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Sinergismo Farmacológico , Femenino , Regulación Neoplásica de la Expresión Génica/efectos de los fármacos , Ratones , Vitamina E/farmacología

RESUMEN

The anticancer effects of γ-tocotrienol are associated with the induction of autophagy and endoplasmic reticulum (ER) stress-mediated apoptosis, but a direct relationship between these events has not been established. Treatment with 40 µmol/L of γ-tocotrienol caused a time-dependent decrease in cancer cell viability that corresponds to a concurrent increase in autophagic and endoplasmic reticulum (ER) stress markers in MCF-7 and MDA-MB-231 human breast cancer cells. γ-Tocotrienol treatment was found to cause a time-dependent increase in early phase (Beclin-1, LC3B-II) and late phase (LAMP-1 and cathepsin-D) autophagy markers, and pretreatment with autophagy inhibitors Beclin-1 siRNA, 3-MA or Baf1 blocked these effects. Furthermore, blockage of γ-tocotrienol-induced autophagy with Beclin-1 siRNA, 3-MA, or Baf1 induced a modest, but significant, reduction in γ-tocotrienol-induced cytotoxicity. γ-Tocotrienol treatment was also found to cause a decrease in mitogenic Erk1/2 signaling, an increase in stress-dependent p38 and JNK1/2 signaling, as well as an increase in ER stress apoptotic markers, including phospho-PERK, phospho-eIF2α, Bip, IRE1α, ATF-4, CHOP, and TRB3. In summary, these finding demonstrate that γ-tocotrienol-induced ER stress and autophagy occur concurrently, and together act to promote human breast cancer cell death.

Asunto(s)

Apoptosis/efectos de los fármacos , Autofagia/efectos de los fármacos , Neoplasias de la Mama/patología , Cromanos/farmacología , Estrés del Retículo Endoplásmico/efectos de los fármacos , Vitamina E/análogos & derivados , Línea Celular Tumoral , Femenino , Colorantes Fluorescentes , Humanos , Vitamina E/farmacología

RESUMEN

The objective of this study was to enhance the solubility as well as to mask the intensely bitter taste of the poorly soluble drug, Mefenamic acid (MA). The taste masking and solubility of the drug was improved by using Eudragit® E PO in different ratios via hot melt extrusion (HME), solid dispersion technology. Differential scanning calorimetry (DSC) studies demonstrated that MA and E PO were completely miscible up to 40% drug loads. Powder X-ray diffraction analysis indicated that MA was converted to its amorphous phase in all of the formulations. Additionally, FT-IR analysis indicated hydrogen bonding between the drug and the carrier up to 25% of drug loading. SEM images indicated aggregation of MA at over 30% of drug loading. Based on the FT-IR, SEM and dissolution results for the extrudates, two optimized formulations (20% and 25% drug loads) were selected to formulate the orally disintegrating tablets (ODTs). ODTs were successfully prepared with excellent friability and rapid disintegration time in addition to having the desired taste-masking effect. All of the extruded formulations and the ODTs were found to be physically and chemically stable over a period of 6 months at 40°C/75% RH and 12 months at 25°C/60% RH, respectively.