RESUMEN

Spring-assisted cranioplasty (SAC) is a minimally invasive technique for treating sagittal synostosis in young infants. Yet, follow-up data on cranial growth in patients who have undergone SAC are lacking. This project aimed to understand how the cranial shape develops during the postoperative period, from spring insertion to removal. 3D head scans of 30 consecutive infants undergoing SAC for sagittal synostosis were acquired using a handheld scanner pre-operatively, immediately postoperatively, at follow-up and at spring removal; 3D scans of 41 age-matched control subjects were also acquired. Measurements of head length, width, height, circumference, and volume were taken for all subjects; cephalic index (CI) was calculated. Statistical shape modeling was used to compute 3D average head models of sagittal patients at the different time points. SAC was performed at a mean age of 5.2 months (range 3.3-8.0) and springs were removed 4.3 months later. CI increased significantly (P < 0.001) from pre-op (69.5% ±â€Š2.8%) to spring removal (74.4% ±â€Š3.9%), mainly due to the widening of head width, which became as wide as for age-matched controls; however, the CI of controls was not reached (82.3% ±â€Š6.8%). The springs did not constrain volume changes and allowed for natural growth. Population mean shapes showed that the bony prominences seen at the sites of spring engagement settle over time, and that springs affect the overall 3D head shape of the skull. In conclusion, results reaffirmed the effectiveness of SAC as a treatment method for nonsyndromic single suture sagittal synostosis.

Asunto(s)

RESUMEN

PURPOSE: The purpose of this retrospective study is to evaluate the accuracy of soft tissue prediction models with Dolphin Imaging. MATERIALS AND METHODS: Preoperative and 1-year postoperative Lateral cephalograms (LCG) of patients undergoing Le Fort I, bilateral sagittal split osteotomy (BSSO) or bimaxillary osteotomy (Bimax) between 2006 and 2009 were retrospectively collected. A hard tissue virtual surgery was performed on the preoperative LCG to match the hard tissue of the 1-year postoperative LCG. The soft tissue changes were then modelled by Dolphin Imaging (version 11.5b) and the differences in x- and y-coordinates of 11 hard tissue and 14 soft tissue landmarks between the predicted model and 1-year postoperative LCG were determined. Statistical analyses were performed using a one-tailed, one-sample t-test for both soft- and hard tissue differences, and a Bland-Altman plot for interobserver bias. RESULTS: A total of 108 patients were included, the mean age was 30 years and 23% were male. The virtual treatment was considered accurate; all hard tissue landmark differences were less than 1mm. The soft tissue model by Dolphin Imaging showed significant differences of more than 2mm for several landmarks, including the vertical positioning of Stomion Inferius (P=0.007), Lower lip (P=0.005) and Pogonion (P=0.03) in the Bimax group and horizontal positioning of Stomion Inferius (P<0.001) in the BSSO group. CONCLUSIONS: Dolphin Imaging gives reasonable predictions of postoperative outcome. There is, however, room for improvement, especially regarding the vertical prediction in the lower lip region.

Asunto(s)

RESUMEN

Arhinia (congenital absence of the nose) is a congenital rare disease, which has been reported in less than 60 cases in the literature. It consists of the absence of external nose, nasal cavities and olfactory apparatus and is generally associated with midline defects, microphthalmia, blepharophimosis and hypotelorism. Aesthetic problems as well as associated functional anomalies can potentially impact on the development and interpersonal relationships of the child at a later stage in life. Arhinia requires extensive management in early life in order to ensure airway patency and protection by means of tracheostomy, and to allow adequate pharyngeal and feeding function to the child. Aesthetic issues are managed with reconstructive surgery or an external prosthesis. There is no previous description in Literature of internal prosthetic devices used to sequentially shape soft tissues in complex reconstruction. We present an example of design and manufacturing of a bespoke nose implant produced by means of 3D printing and directly assessed on-table by means of 3D surface scanning.

RESUMEN

BACKGROUND: Spring-assisted cranioplasty has been proposed as an alternative to total calvarial remodeling for sagittal craniosynostosis. Advantages include its minimally invasive nature, and reduced morbidity and hospital stay. Potential drawbacks include the need for a second procedure for removal and the lack of published long-term follow-up. The authors present a single-institution experience of 100 consecutive cases using a novel spring design. METHODS: All patients treated at the authors' institution between April of 2010 and September of 2014 were evaluated retrospectively. Patients with isolated nonsyndromic sagittal craniosynostosis were included. Data were collected for operative time, anesthetic time, hospital stay, transfusion requirement, and complications in addition to cephalic index preoperatively and at 1 day, 3 weeks, and 6 months postoperatively. RESULTS: One hundred patients were included. Mean cephalic index was 68 preoperatively, 71 at day 1, and 72 at 3 weeks and 6 months postoperatively. Nine patients required transfusion. Two patients developed a cerebrospinal fluid leak requiring intervention. One patient required early removal of springs because of infection. One patient had a wound dehiscence over the spring and one patient sustained a venous infarct with hemiplegia. Five patients required further calvarial remodeling surgery. CONCLUSIONS: The authors' modified spring design and protocol represents an effective strategy in the management of single-suture sagittal craniosynostosis with reduced total operative time and blood loss compared with alternative treatment strategies. In patients referred within the first 6 months of birth, this technique has become the authors' procedure of choice. In a minority of cases, especially in the older age groups, further remodeling surgery is required. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Asunto(s)

RESUMEN

Trigonocephaly in patients with metopic synostosis is corrected by fronto-orbital remodelling (FOR). The aim of this study was to quantitatively assess aesthetic outcomes of FOR by capturing 3D forehead scans of metopic patients pre- and post-operatively and comparing them with controls. Ten single-suture metopic patients undergoing FOR and 15 age-matched non-craniosynostotic controls were recruited at Great Ormond Street Hospital for Children (UK). Scans were acquired with a three-dimensional (3D) handheld camera and post-processed combining 3D imaging software. 3D scans were first used for cephalometric measurements. Statistical shape modelling was then used to compute the 3D mean head shapes of the three groups (FOR pre-op, post-op and controls). Head shape variations were described via principal component analysis (PCA). Cephalometric measurements showed that FOR significantly increased the forehead volume and improved trigonocephaly. This improvement was supported visually by pre- and post-operative computed mean 3D shapes and numerically by PCA (p < 0.001). Compared with controls, post-operative scans showed flatter foreheads (p < 0.001). In conclusion, 3D scanning followed by 3D statistical shape modelling enabled the 3D comparison of forehead shapes of metopic patients and non-craniosynostotic controls, and demonstrated that the adopted FOR technique was successful in correcting bitemporal narrowing but overcorrected the rounding of the forehead.

Asunto(s)

RESUMEN

Three-dimensional (3D) imaging is an important tool for diagnostics, surgical planning, and evaluation of surgical outcomes in craniofacial procedures. Gold standard for acquiring 3D imaging is computed tomography that entails ionizing radiations and, in young children, a general anaesthesia. Three-dimensional photographic imaging is an alternative method to assess patients who have undergone calvarial reconstructive surgery. The aim of this study was to assess the utility of 3D handheld scanning photography in a cohort of patients who underwent spring-assisted correction surgery for scaphocephaly. Pre- and postoperative 3D scans acquired in theater and at the 3-week follow-up in clinic were postprocessed for 9 patients. Cephalic index (CI), head circumference, volume, sagittal length, and coronal width over the head at pre-op, post-op, and follow-up were measured from the 3D scans. Cephalic index from 3D scans was compared with measurements from planar x-rays. Statistical shape modeling (SSM) was used to calculate the 3D mean anatomical head shape of the 9 patients at the pre-op, post-op, and follow-up. No significant differences were observed in the CI between 3D and x-ray. Cephalic index, volume, and coronal width increased significantly over time. Mean shapes from SSM visualized the overall and regional 3D changes due to the expansion of the springs in situ. Three-dimensional handheld scanning followed by SSM proved to be an efficacious and practical method to evaluate 3D shape outcomes after spring-assisted cranioplasty in individual patients and the population.

Asunto(s)