RESUMEN
In recent years, fluctuating global fossil fuel market prices and growing concern about environmental pollution have increased efforts to obtain novel value-added products from renewable agricultural biomass. To this end, a wide variety of triacylglycerols (edible and non-edible oils and fats) and their derivatives (free fatty acids or monoalkyl esters) stand out as promising feedstocks for the production of biolubricant base stocks, due to their biodegradability, excellent physicochemical properties, and sustainable nature. These raw materials can be transformed into biolubricants using chemical or biochemical (lipases) catalysts, with the enzymatic production of biolubricants using lipases as catalysts being recognized as an environmentally friendly approach. The present mini-review highlights recent advances in this field, published in the last three years. The different chemical modification processes used to develop a wide variety of industrial biolubricant base stocks are comprehensively reviewed, with exploration of future prospects for industrial production via the enzymatic route. This study contributes to the current state-of-the-art, identifying relevant research questions and providing important technical information for new applications of lipases in oleochemical manufacturing industries.
Asunto(s)
Ésteres , Lipasa , Triglicéridos , Aceites de Plantas , IndustriasRESUMEN
Attainment of a stable and highly active ß-xylosidase is of major importance for the efficient and cost-competitive hydrolysis of hemicellulose xylan, as well as for its industrial conversion into biofuels and biochemicals. Here, a recombinant ß-xylosidase of the glycoside hydrolase family (GH43) from Bacillus subtilis was produced in Escherichia coli culture, purified, and subsequently immobilized on agarose and chitosan. Glutaraldehyde and glyoxyl groups were evaluated as activating agents to select the most efficient derivative. Multi-point immobilization on agarose led to an extraordinary thermal stability (half-lives 3604 and 164-fold higher than the free enzyme, at 50° and 35 °C, respectively). Even for chitosan activated with glutaraldehyde, a low-cost support, thermal stability of the immobilized enzyme was 326 and 12-fold higher than the free enzyme at 50° and 35°C, respectively. Immobilized enzymes showed no release of any subunit for the agarose-glyoxyl derivative, and only a few ones for the support activated with glutaraldehyde. Most remarkably, the enzyme kinetic behavior after immobilization increased up to 4-fold in relation to the free one. ß-xylosidase, a tetrameric enzyme with four identical subunits, exists in equilibrium between the monomeric and oligomeric forms in solution. Depending on the pH of immobilization, the enzyme oligomerization can be favored, thus explaining the hyperactivation phenomenon. Both glyoxyl-agarose and chitosan-glutaraldehyde derivatives were used to catalyze corncob xylan hydrolysis, reaching 72 % conversion, representing a xylose productivity of around 20 g L-1 h-1. After ten 4h-cycles (pH 6.0, 35 °C), the xylan-to-xylose conversion remained approximately unchanged. Therefore, the immobilized ß-xylosidases prepared in this work can be of great interest as biocatalysts in a biorefinery context.
Asunto(s)
Xilosidasas , Estabilidad de Enzimas , Enzimas Inmovilizadas/metabolismo , Concentración de Iones de Hidrógeno , Hidrólisis , Xilanos , Xilosidasas/genética , Xilosidasas/metabolismoRESUMEN
A new design of cross-linked enzyme aggregates (CLEAs) of Burkholderia cepacia lipase (BCL) based mainly on the use of lignocellulosic residue of palm fiber as an additive was proposed. Different parameters for the preparation of active CLEAs in the hydrolysis of olive oil, such as precipitation agents, crosslinking agent concentration, additives, and coating agents were investigated. The highest activity yield (121.1 ± 0.1%) and volumetric activity (1578.1 ± 2.5 U/mL) were achieved for CLEAs prepared using the combination of a coating step with Triton® X-100 and polyethyleneimine plus the use of palm fiber as an additive. The variations of the secondary structures of BCL-CLEAs were analyzed by second-derivative infrared spectra, mainly indicating a reduction of the α-helix structure, which was responsible for the lipase activation in the supramolecular structure of the CLEAs. Thus, these results provided evidence of an innovative design of BCL-CLEAs as a sustainable and biocompatible opportunity for biotechnology applications.
Asunto(s)
Proteínas Bacterianas/química , Burkholderia cepacia/enzimología , Enzimas Inmovilizadas/química , Lipasa/química , Estabilidad de Enzimas , CinéticaRESUMEN
Attainment of a stable and highly active β-xylosidase is of major importance for the efficient and cost-competitive hydrolysis of hemicellulose xylan, as well as for its industrial conversion into biofuels and biochemicals. Here, a recombinant β-xylosidase of the glycoside hydrolase family (GH43) from Bacillus subtilis was produced in Escherichia coli culture, purified, and subsequently immobilized on agarose and chitosan. Glutaraldehyde and glyoxyl groups were evaluated as activating agents to select the most efficient derivative. Multi-point immobilization on agarose led to an extraordinary thermal stability (half-lives 3604 and 164-fold higher than the free enzyme, at 50° and 35 °C, respectively). Even for chitosan activated with glutaraldehyde, a low-cost support, thermal stability of the immobilized enzyme was 326 and 12-fold higher than the free enzyme at 50° and 35°C, respectively. Immobilized enzymes showed no release of any subunit for the agarose-glyoxyl derivative, and only a few ones for the support activated with glutaraldehyde. Most remarkably, the enzyme kinetic behavior after immobilization increased up to 4-fold in relation to the free one. β-xylosidase, a tetrameric enzyme with four identical subunits, exists in equilibrium between the monomeric and oligomeric forms in solution. Depending on the pH of immobilization, the enzyme oligomerization can be favored, thus explaining the hyperactivation phenomenon. Both glyoxyl-agarose and chitosan-glutaraldehyde derivatives were used to catalyze corncob xylan hydrolysis, reaching 72 % conversion, representing a xylose productivity of around 20 g L−1 h−1. After ten 4h-cycles (pH 6.0, 35 °C), the xylan-to-xylose conversion remained approximately unchanged. Therefore, the immobilized β-xylosidases prepared in this work can be of great interest as biocatalysts in a biorefinery context.
RESUMEN
Hydroxyapatite (HA) nanoparticles are promising materials for enzyme immobilization, since they provide a high specific surface area for enzyme loading and can also be modified with metal ions (HA-Me2+) to enable interaction with proteins. The adsorption of proteins on HA-Me2+ has been explored for purification purposes, while the use of this material as a support for the immobilization of enzymes remains to be further investigated. Xylanase is an enzyme of considerable industrial interest, being used in the biofuel, pharmaceutical, pulp, and food & beverage sectors, among others. The immobilization of xylanase can enable recovery of the enzyme after biocatalysis, so that it can be reused several times, hence reducing the costs of industrial processes. Here, a systematic study was performed of the immobilization of xylanase on HA nanoparticles modified with metal ions (Cu2+ and Ni2+). A simple, fast, and efficient immobilization protocol was established using statistical experimental design as a tool, generating derivatives by interactions involving complexation of metals of the support with electron donor groups of the enzyme. The affinity towards xylanase was higher for the HA-Cu2+ support, compared to HA and HA-Ni2+. The pH and temperature profiles for the immobilized enzyme activity remained the same as for the soluble enzyme, indicating that the xylanase did not undergo major changes in its conformational state after immobilization. The HA-Cu2+ support was the most effective in reuse assays, retaining up to 80% activity in the second cycle. The results showed that xylanase could be immobilized on HA nanoparticles modified with Cu2+ and Ni2+ metal ions, using a simple and effective method, indicating the promising potential of the system for applications in different industrial processes.
Asunto(s)
Durapatita/química , Endo-1,4-beta Xilanasas/química , Enzimas Inmovilizadas , Iones , Metales , Nanopartículas/química , Adsorción , Análisis de Varianza , Biocatálisis , Activación Enzimática , Estabilidad de Enzimas , Concentración de Iones de Hidrógeno , Hidrólisis , Modelos Moleculares , Conformación Molecular , Análisis Espectral , Relación Estructura-Actividad , Temperatura , TermodinámicaRESUMEN
In the original version of this article, under Calculation of Immobilization Parameters heading, the presentation of the equations are incorrect. The correct presentation of the equations are given below.
RESUMEN
The enzyme phytase has important applications in animal feed, because it favors the bioavailability of phosphorus present in phytate, an antinutritional compound widely found associated with plant proteins. However, for feed applications, the phytase must withstand high temperatures during the feed pelleting process, as well as the gastrointestinal conditions of the animal. This work evaluates the feasibility of immobilizing phytase on hydroxyapatite (HA) nanoparticles, in order to improve its properties. HA is a material with excellent physicochemical characteristics for enzyme immobilization, and it can also act as an inorganic source of phosphorus and calcium in animal feed. The strong affinity of the phytase for the support resulted in rapid adsorption, with total immobilization yield and recovered activity greater than 100%. After immobilization, the phytase showed a broader activity profile in terms of pH and temperature, together with considerably higher thermoresistance at 80 and 90 °C. As a proof of concept, it was shown that the phytase immobilized on HA presented good resistance to acidic conditions and resistance to proteolysis when passing through simulated gastrointestinal conditions of fish. The findings showed that phytase immobilized onto HA presents suitable properties and has great potential for use in animal feed.
Asunto(s)
6-Fitasa/metabolismo , Alimentación Animal , Durapatita/química , Enzimas Inmovilizadas/metabolismo , Nanopartículas/química , Animales , Peces , Calor , Concentración de Iones de Hidrógeno , Concentración Osmolar , ProteolisisRESUMEN
Silica has been extracted from rice husks via a simple hydrothermal process and functionalized with triethoxy(octyl)silane -OCTES (Octyl-SiO2) and (3-aminopropyl)triethoxysilane - 3-APTES (Amino-SiO2), with the aim of using it as support to immobilize lipase from Thermomyces lanuginosus (TLL) via adsorption. The supports have been characterized by particle size distribution and elemental analyses, XRD, TGA, SEM, AFM and N2 physisorption so as to confirm their functionalization. Effect of pH, temperature, initial protein loading and contact time on the adsorption process has been systematically evaluated. Maximum immobilized protein loading of 12.3 ± 0.1 mg/g for Amino-SiO2 (5 mM buffer sodium acetate at pH 4.0, 25 °C and initial protein loading of 20 mg/g) and 21.9 ± 0.1 mg/g for Octyl-SiO2 (5 mM buffer sodium acetate at pH 5.0, 25 °C and initial protein loading of 30 mg/g) was observed. However, these biocatalysts presented similar catalytic activity in olive oil emulsion hydrolysis (between 630 and 645 U/g). TLL adsorption was a spontaneous process involving physisorption. Experimental data on Octyl-SiO2 and Amino-SiO2 adsorption were well-fitted to the Langmuir isotherm model. It was also investigated whether these biocatalysts could synthesize cetyl esters via esterification reaction. Thus, it was found that cetyl stearate synthesis required 100-110 min of reaction time to attain maximum conversion percentage (around 94%). Ester productivity of immobilized TLL on Amino-SiO2 was 1.3-3.1 times higher than Octyl-SiO2.
Asunto(s)
Adsorción , Enzimas Inmovilizadas/metabolismo , Eurotiales/enzimología , Lipasa/metabolismo , Concentración de Iones de Hidrógeno , Hidrólisis , Cinética , Lipasa/aislamiento & purificación , Aceite de Oliva/metabolismo , Oryza/química , Dióxido de Silicio/aislamiento & purificación , Dióxido de Silicio/metabolismo , TemperaturaRESUMEN
Different immobilized biocatalysts of Thermomyces lanuginosus lipase (TLL) exhibited different properties for the ethanolysis of high oleic sunflower oil in solvent-free systems. TLL immobilized by interfacial adsorption on octadecyl (C-18) supports lost its 1,3-regioselectivity and produced more than 99% of ethyl esters. This reaction was influenced by mass-transfer limitations. TLL adsorbed on macroporous C-18 supports (616 Å of pore diameter) was 10-fold more active than TLL adsorbed on mesoporous supports (100-200 Å of pore diameter) in solvent-free systems. Both derivatives exhibited similar activity when working in hexane in the absence of diffusional limitations. In addition, TLL adsorbed on macroporous Purolite C-18 was 5-fold more stable than TLL adsorbed on mesoporous Sepabeads C-18. The stability of the best biocatalyst was 20-fold lower in anhydrous oil than in anhydrous hexane. Mild PEGylation of immobilized TLL greatly increased its stability in anhydrous hexane at 40 °C, fully preserving the activity after 20 days. In anhydrous oil at 40 °C, PEGylated TLL-Purolite C-18 retained 65% of its initial activity after six days compared to 10% of the activity retained by the unmodified biocatalyst. Macroporous and highly hydrophobic supports (e.g., Purolite C-18) seem to be very useful to prepare optimal immobilized biocatalysts for ethanolysis of oils by TLL in solvent-free systems.
Asunto(s)
Ascomicetos/enzimología , Enzimas Inmovilizadas/química , Etanol/química , Lipasa/química , Aceite de Girasol/química , Adsorción , Biocatálisis , Hexanos/química , Interacciones Hidrofóbicas e Hidrofílicas , Polietilenglicoles/químicaRESUMEN
Ion-exchange supports have been prepared via sequential functionalization of silica-based materials with (3Glycidyloxypropyl)trimethoxysilane (GPTMS) (Epx-SiO2) and activation with glycine (Gly-Epx-SiO2) in order to immobilize lipase from Thermomyces lanuginosus (TLL) via adsorption. Rice husk silica (RHS) was selected as support with the aim of comparing its performance with commercial silica (Immobead S60S). Sequential functionalization/activation of SiO2-based supports has been confirmed by AFM, SEM and N2 adsorption-desorption analyses. Maximum TLL adsorption capacities of 14.8⯱â¯0.1â¯mg/g and 16.1⯱â¯0.6â¯mg/g using RHS and Immobead S60S as supports, respectively, have been reached. The Sips isotherm model has been used which was well fitted to experimental data on TLL adsorption. Catalytic activities of immobilized TLL were assayed by olive oil emulsion hydrolysis and butyl stearate synthesis via an esterification reaction. Hydrolytic activity of the biocatalyst prepared with a commercial support (357.6⯱â¯11.2â¯U/g) was slightly higher than that of Gly-Epx-SiO2 prepared with RHS (307.4⯱â¯7.2â¯U/g). On the other hand, both biocatalysts presented similar activity (around 90% conversion within 9-10â¯h of reaction) and reusability after 6 consecutive cycles of butyl stearate synthesis in batch systems.
Asunto(s)
Biocatálisis , Enzimas Inmovilizadas/metabolismo , Compuestos Epoxi/química , Eurotiales/enzimología , Glicina/química , Lipasa/metabolismo , Dióxido de Silicio/química , Enzimas Inmovilizadas/química , Esterificación , Concentración de Iones de Hidrógeno , Hidrólisis , Intercambio Iónico , Lipasa/química , Estearatos/químicaRESUMEN
ß-Glucosidase is an enzyme of great industrial interest that is used in biorefineries and in the pharmaceutical, food, and beverage sectors, among others. These industrial processes would benefit from the use of immobilized enzyme systems that allow several reuses of the enzyme. A promising inorganic and nontoxic material for such application is hydroxyapatite (HA), which can be synthesized at nanometric scale, hence providing good accessibility of the substrate to the catalyst. Here, we carried out a systematic study to evaluate the feasibility of immobilizing ß-glucosidase on HA nanoparticles. The immobilization process was highly effective over wide ranges of pH and ionic strength, resulting in immobilization yields and recovered activities up to 90%. Investigation of the type of interaction between ß-glucosidase and HA (using FT-IR, zeta potential measurements, and desorption tests with different salts) indicated the formation of coordination bonds between Ca2+ sites of HA and COO- of amino acids. Even after 10â¯cycles of reuse, the immobilized ß-glucosidase retained about 70% of its initial activity, demonstrating the operational stability of the immobilized enzyme. The results showed that ß-glucosidase could be efficiently immobilized on HA nanoparticles by means of a very simple adsorption protocol, offering a promising strategy for performing repeated enzymatic hydrolysis reactions.
Asunto(s)
Durapatita/química , Enzimas Inmovilizadas , beta-Glucosidasa/química , Adsorción , Catálisis , Estabilidad de Enzimas , Concentración de Iones de Hidrógeno , Hidrólisis , Cinética , Concentración Osmolar , Espectroscopía Infrarroja por Transformada de Fourier , Especificidad por Sustrato , TemperaturaRESUMEN
Over the past decades, most studies with xylanases have used Birchwood xylan as the standard substrate for activity assays. However, recently, Birchwood xylan production was discontinued by major suppliers, creating an important demand for a substitute. Ongoing and future studies require a substrate with characteristics equivalent to the discontinued xylan, in order to enable the comparison of results. In this context, a protocol for the production of a substrate similar to the discontinued commercial Birchwood xylan is reported. Obtained from bleached Eucalyptus cellulose pulp, xylan was extracted using 4% w/v NaOH solution at 25⯰C, precipitated with glacial acetic acid (HOAc), and freeze-dried. A thermal pretreatment in an autoclave for 15â¯min increased its solubility. The resulting xylan was characterized by infrared spectroscopy, thermogravimetry, and NMR. When assessing the activity of xylanases, the results were the same as those for commercial Birchwood xylan.
RESUMEN
The preparation of crosslinked aggregates of pancreatic porcine lipase (PPL-CLEA) was systematically studied, evaluating the influence of three precipitants and two crosslinking agents, as well as the use of soy protein as an alternative feeder protein on the catalytic properties and stability of the immobilized PPL. Standard CLEAs showed a global yield (CLEA' observed activity/offered total activity) of less than 4%, whereas with the addition of soy protein (PPL:soy protein mass ratio of 1:3) the global yield was approximately fivefold higher. The CLEA of PPL prepared with soy protein as feeder (PPL:soy protein mass ratio of 1:3) and glutaraldehyde as crosslinking reagent (10 µmol of aldehyde groups/mg of total protein) was more active mainly because of the reduced enzyme leaching in the washing step. This CLEA, named PPL-SOY-CLEA, had an immobilization yield around 60% and an expressed activity around 40%. In the ethanolysis of soybean oil, the PPL-SOY-CLEA yielded maximum fatty acid ethyl ester (FAEE) concentration around 12-fold higher than that achieved using soluble PPL (34 h reaction at 30°C, 300 rpm stirring, soybean oil/ethanol molar ratio of 1:5) with an enzyme load around 2-fold lower (very likely due to free enzyme inactivation). The operational stability of the PPL-SOY-CLEA in the ethanolysis of soybean oil in a vortex flow type reactor showed that FAEE yield was higher than 50% during ten reaction cycles of 24 h. This reactor configuration may be an attractive alternative to the conventional stirred reactors for biotransformations in industrial plants using carrier-free biocatalysts. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:910-920, 2018.
Asunto(s)
Etanol/química , Lipasa/metabolismo , Páncreas/enzimología , Aceite de Soja/metabolismo , Animales , Reactores Biológicos , Reactivos de Enlaces Cruzados , Aceite de Soja/química , PorcinosRESUMEN
Lipases from Thermomyces lanuginosus (TLL) and Pseudomonas fluorescens (PFL) wereimmobilized on functionalized silica particles aiming their use in the synthesis of fructose oleate in a tert-butyl alcohol/water system. Silica particles were chemically modified with octyl (OS), octyl plus glutaraldehyde (OSGlu), octyl plus glyoxyl(OSGlx), and octyl plus epoxy groups(OSEpx). PFL was hyperactivated on all functionalized supports (more than 100% recovered activity) using low protein loading (1 mg/g), however, for TLL, this phenomenon was observed only using octyl-silica (OS). All prepared biocatalysts exhibited high stability by incubating in tert-butyl alcohol (half-lives around 50 h at 65 °C). The biocatalysts prepared using OS and OSGlu as supports showed excellent performance in the synthesis of fructose oleate. High estersynthesis was observed when a small amount of water (1%, v/v) was added to the organic phase, allowing an ester productivity until five times (0.88-0.96 g/L.h) higher than in the absence of water (0.18-0.34 g/L.h) under fixed enzyme concentration (0.51 IU/g of solvent). Maximum ester productivity (16.1-18.1 g/L.h) was achieved for 30 min of reaction catalyzed by immobilized lipases on OS and OSGlu at 8.4 IU/mL of solvent. Operational stability tests showed satisfactory stability after four consecutive cycles of reaction.
Asunto(s)
Enzimas Inmovilizadas , Fructosa/química , Lipasa/metabolismo , Ácido Oléico/síntesis química , Dióxido de Silicio , Biocatálisis , Estabilidad de Enzimas , Lipasa/química , Modelos Moleculares , Conformación Molecular , Solventes , AguaRESUMEN
BACKGROUND: Candida rugosa Lipase (CRL) shows a very low alkaline stability that comprises its immobilization on glyoxyl-agarose, which requires pH above 10. In this way, an adaptation from the original method was used; an enzyme solution at pH 7 was slowly added at a suspension of glyoxyl-agarose prepared in bicarbonate buffer, pH 10. This change of protocol was enough for allowing the preparation of derivatives actives of CRL on glyoxyl-agarose and verifying the effect of this modified procedure on the properties of the immobilized enzyme. The effect of the additives Triton-X-100 and polyethylene glycol (PEG) on the enzymatic activity recovery and immobilized enzyme stability was evaluated. METHODS: The glyoxyl-agarose support was prepared by etherification of 6% agarose beads with glycidol and further oxidation with sodium periodate. CRL was immobilized covalently on glyoxyl-agarose support in the absence and presence of 1% (w/v) Triton-X-100 or 5 g L-1 polyethylene glycol (PEG). The lipolysis activity of the free and immobilized enzyme was determined at 37ºC and pH 7.0, using p-nitrophenyl palmitate (p-NPP) as substrate. Profiles of temperature-activity (37-65ºC, pH 7.0) and pH-activity (6.0-9.5, 37ºC) were evaluated as well as thermal (45ºC and pH 8.0) and operational (15 min batches of p-NPP hydrolysis at 50ºC and pH 8.0) stabilities of free and immobilized CRL. RESULTS: Using a single modification of the original protocol, the CRL poorly stable under alkaline conditions could be immobilized on glyoxyl-agarose in its active conformation (recovered activity varying from 10.3 to 30.4%). Besides, the presence of a detergent (Triton-X-100) and an enzyme stabilizer (PEG) contributed to the preparation of more active and more stable biocatalysts, respectively. CRL immobilized on glyoxyl-agarose in the presence of PEG was around 5 times more stable than the free CRL and around 3 times more stable than the CRL immobilized on glyoxyl-agarose in absence of PEG. The higher stability of the CRL-glyoxyl derivative prepared in the presence of PEG allowed its reuse in four successive 15 min-batches of p-nitrophenyl palmitate hydrolysis at 50ºC and pH 8.0. CONCLUSION: The technique of immobilizing enzymes covalently on glyoxyl-agarose showed promising results for Candida rugosa lipase (CRL). The derivatives prepared in the presence of the additives retained two to three times more activity than those prepared in the absence of additives. The enzyme immobilized in presence of PEG was about three times more stable than the enzyme immobilized in absence of this additive. Maximum catalytic activity of the immobilized CRL (in absence of additives) was observed in a temperature 10ºC above that for the free enzyme and the pH of the maximum activity was maintained in the range 6.5-7.5 for free and immobilized CRL.
RESUMEN
The use of residues from the industrial processing of palm oil as carbon source and inducer for microbial lipase production can be a way to add value to such residues and to contribute to reduced enzyme costs. The aim of this work was to investigate the feasibility of using palm oil industrial waste as feedstock for lipase production in different cultivation systems. Evaluation was made of lipase production by a selected strain of Aspergillus niger cultivated under solid-state (SSF) and submerged fermentation (SmF). Lipase activity levels up to 15.41 IU/mL were achieved under SSF. The effects of pH and temperature on the lipase activity of the SSF extract were evaluated using statistical design methodology, and maximum activities were obtained between pH 4.0 and 6.5 and at temperatures between 37 and 55 °C. This lipase presented good thermal stability up to 60 °C and higher specificity towards long carbon chain substrates. The results demonstrate the potential application of palm oil industrial residues for lipase production and contribute to the technological advances needed to develop processes for industrial enzymes production.
Asunto(s)
Fermentación , Lipasa/biosíntesis , Aceites de Plantas/química , Aspergillus niger/enzimología , Estabilidad de Enzimas , Concentración de Iones de Hidrógeno , Residuos Industriales , Lipasa/química , Lipasa/genética , Aceite de Palma , TemperaturaRESUMEN
This work describes the preparation of biocatalysts for ethanolysis of soybean and babassu oils in solvent-free systems. Polystyrene, Amberlite (XAD-7HP), and octyl-silica were tested as supports for the immobilization of Pseudomonas fluorescens lipase (PFL). The use of octyl-silica resulted in a biocatalyst with high values of hydrolytic activity (650.0 ± 15.5 IU/g), immobilization yield (91.3 ± 0.3 %), and recovered activity (82.1 ± 1.5 %). PFL immobilized on octyl-silica was around 12-fold more stable than soluble PFL, at 45 °C and pH 8.0, in the presence of ethanol at 36 % (v/v). The biocatalyst provided high vegetable oil transesterification yields of around 97.5 % after 24 h of reaction using babassu oil and around 80 % after 48 h of reaction using soybean oil. The PFL-octyl-silica biocatalyst retained around 90 % of its initial activity after five cycles of transesterification of soybean oil. Octyl-silica is a promising support that can be used to immobilize PFL for subsequent application in biodiesel synthesis.
Asunto(s)
Biocombustibles/provisión & distribución , Enzimas Inmovilizadas/metabolismo , Interacciones Hidrofóbicas e Hidrofílicas , Lipasa/química , Lipasa/metabolismo , Aceites de Plantas/metabolismo , Pseudomonas fluorescens/enzimología , Biocatálisis , Enzimas Inmovilizadas/química , Esterificación , Etanol , Concentración de Iones de Hidrógeno , Hidrólisis , Aceites de Plantas/química , Dióxido de Silicio/química , Solventes , Aceite de Soja/química , Aceite de Soja/metabolismo , TemperaturaRESUMEN
ß -Glucosidase (BGL) is a hydrolytic enzyme with specificity for a wide variety of glycoside substrates, being an enzyme with a large range of biotechnological applications. However, enzyme properties can be different depending both on the microorganism and the cultivation procedure employed. Therefore, in order to explore potential biocatalytical applications of novel enzymes, their characterization is essential. In this work, a BGL synthesized by a selected strain of Aspergillus niger cultivated under solid-state fermentation (SSF) was partially purified and fully characterized in terms of optimum pH, temperature, and thermostability. The single-step purification using MANAE-agarose in a chromatographic column yielded an enzyme solution with specific activity (17.1 IU/mg protein) adequate for the characterization procedures. Electrophoresis SDS-PAGE and size-exclusion chromatography analysis resulted in an estimated molecular mass of 60 kDa. Higher enzyme activities were found in the range between 40 and 65°C and between pH 4 and 5.5, indicating an interesting characteristic for application in the hydrolysis of lignocellulosic biomass for biofuels production. Thermostability studies of purified BGL resulted in half-lives at 37°C of 56.3 h and at 50°C of 5.4 h. These results provide support for further studies of this enzyme towards revealing its potential biotechnological applications.
RESUMEN
This work aimed at the production of stabilized derivatives of Thermomyces lanuginosus lipase (TLL) by multipoint covalent immobilization of the enzyme on chitosan-based matrices. The resulting biocatalysts were tested for synthesis of biodiesel by ethanolysis of palm oil. Different hydrogels were prepared: chitosan alone and in polyelectrolyte complexes (PEC) with κ-carrageenan, gelatin, alginate, and polyvinyl alcohol (PVA). The obtained supports were chemically modified with 2,4,6-trinitrobenzene sulfonic acid (TNBS) to increase support hydrophobicity, followed by activation with different agents such as glycidol (GLY), epichlorohydrin (EPI), and glutaraldehyde (GLU). The chitosan-alginate hydrogel, chemically modified with TNBS, provided derivatives with higher apparent hydrolytic activity (HA(app)) and thermal stability, being up to 45-fold more stable than soluble lipase. The maximum load of immobilized enzyme was 17.5 mg g(-1) of gel for GLU, 7.76 mg g(-1) of gel for GLY, and 7.65 mg g(-1) of gel for EPI derivatives, the latter presenting the maximum apparent hydrolytic activity (364.8 IU g(-1) of gel). The three derivatives catalyzed conversion of palm oil to biodiesel, but chitosan-alginate-TNBS activated via GLY and EPI led to higher recovered activities of the enzyme. Thus, this is a more attractive option for both hydrolysis and transesterification of vegetable oils using immobilized TLL, although industrial application of this biocatalyst still demands further improvements in its half-life to make the enzymatic process economically attractive.
Asunto(s)
Ascomicetos/metabolismo , Quitosano/química , Hidrogeles/química , Lipasa/química , Alginatos/química , Biocombustibles , Biotecnología , Carragenina/química , Carragenina/metabolismo , Catálisis , Electrólitos/química , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Compuestos Epoxi/química , Esterificación , Ácido Glucurónico/química , Glutaral/química , Semivida , Ácidos Hexurónicos/química , Concentración de Iones de Hidrógeno , Hidrólisis , Lipasa/metabolismo , Alcohol Polivinílico/química , Propanoles/químicaRESUMEN
Ethanol from lignocellulosic biomass has been recognized as one of the most promising alternatives for the production of renewable and sustainable energy. However, one of the major bottlenecks holding back its commercialization is the high costs of the enzymes needed for biomass conversion. In this work, we studied the enzymes produced from a selected strain of Aspergillus niger under solid state fermentation. The cellulase and xylanase enzymatic cocktail was characterized in terms of pH and temperature by using response surface methodology. Thermostability and kinetic parameters were also determined. The statistical analysis of pH and temperature effects on enzymatic activity showed a synergistic interaction of these two variables, thus enabling to find a pH and temperature range in which the enzymes have a higher activity. The results obtained allowed the construction of mathematical models used to predict endoglucanase, ß-glucosidase and xylanase activities under different pH and temperature conditions. Optimum temperature values for all three enzymes were found to be in the range between 35°C and 60°C, and the optimum pH range was found between 4 and 5.5. The methodology employed here was very effective in estimating enzyme behavior under different process conditions.