RESUMEN
The present study investigates the photocatalytic properties of hydrothermally synthesized TiO2 nanowires (NWs) for CO2 reduction in H2O vapor. It has been demonstrated that TiO2 NWs, thermally treated at 500-700 °C, demonstrate an almost tenfold higher yield of products compared to the known commercial powder TiO2 P25. It has been found that the best material is a combination of anatase, TiO2-B and rutile. The product yield increases with increasing heat treatment temperature of TiO2 NWs. This is associated with an increase in the degree of crystallinity of the material. It is shown that the best product yield of the CO2 reduction in H2O vapor is achieved when the TiO2 NW photocatalyst is heated to 100 °C.
RESUMEN
This study demonstrates the ability to control the properties of TiO2-CuOx composite layers for photocatalytic applications by using a simple electrophoretic deposition method from isopropanol-based suspension. To obtain uniform layers with a controlled composition, the surfactant sodium lauryl sulfate was used, which influenced the electrophoretic mobility of the particles and the morphology of the deposited layers. The TiO2-CuOx composite layers with different CuOx contents (1.5, 5.5, and 11 wt.%) were obtained. It is shown that the optical band gap measured by UV-VIS-NIR diffuse reflectance spectra. When CuOx is added to TiO2, two absorption edges corresponding to TiO2 and CuOx are observed, indicating a broadening of the photosensitivity range of the material relative to pure TiO2. An open-circuit potential study shows that by changing the amount of CuOx in the composite material, one can control the ratio of free charge carriers (n and p) and, therefore, the catalytic properties of the material. As a result, the TiO2-CuOx composite layers have enhanced photocatalytic activity compared to the pure TiO2 layer: methanol yield grows with increasing CuOx content during CO2 photoreduction.