RESUMEN
Fire and extreme heat environmental changes can have an impact on concrete performance, and as climate change increases, new concrete structures are being developed. Nano-silica and nano-calcium carbonate have shown excellent performances in modifying concrete due to their large specific surface areas. This review describes the changes in concrete modified with nano-silica (NS) and nano-calcium carbonate (NC), which accelerate the hydration reaction with the cementitious materials to produce more C-S-H, resulting in a denser microstructure and improved mechanical properties and durability of the concrete. The mechanical property decay and visualization of deformation of mixed NS and NC concrete were tested by exposure to high temperatures to investigate the practical application of mixed composite nanomaterials (NC+NS) to concrete. The nano-modified concrete had better overall properties and was heated at 200 °C, 400 °C, 600 °C and 800 °C to relatively improve the mechanical properties of the nano concrete structures. The review concluded that high temperatures of 800 °C to 1000 °C severely damaged the structure of the concrete, reducing the mechanical properties by around 60%, and the dense nano concrete structures were more susceptible to cracking and damage. The high temperature resistance of NS and NC-modified nano concrete was relatively higher than that of normal concrete, with NC concrete being more resistant to damage at high temperatures than the NS samples.
RESUMEN
This study aimed to evaluate the effects of carbon nanofibers (CNFs) on the performance of liquid epoxidized natural rubber (LENR)-modified asphalt. The physical, adhesion and rheological properties were determined by several tests such as penetration, elastic recovery, ring and ball softening point, Brookfield rotational viscometer, AFM and dynamic shear rheometer. LENR was used at concentrations of 3, 6, and 9%, while CNFs were used at contents of 0.3, 0.4, and 0.5% by weight of asphalt. Conventional test results showed that the increases in LENR and LENR/CNFs composite contents in binder leads to an increase in the hardness and consistency and a reduction in the temperature susceptibility of base asphalt. Adhesion results revealed that the addition of CNFs significantly increases the adhesion and bonding properties of base and rubberized binders. Rheological properties analysis exhibited that LENR improved the viscoelastic properties and permanent deformation resistance of asphalt at different temperatures and frequencies. On the other hand, it was found that the addition of CNFs significantly improves the stiffness, elasticity, and hardness of LENR-modified binders. The 6% LENR and 0.4% CNFs were found to be the optimum to enhance the physical, adhesion, and rheological properties of asphalt in this study. Thus, it can be stated that the addition of CNFs is promising to improve the performance of rubberized binders for high temperature applications.