RESUMEN

Hydrothermally formed mesoporous SnO2 was used as a support for nickel chemical deposition and, after subsequent thermal treatment, a high specific surface area (36 m2 g-1) Ni/SnO2 material was obtained. XPS analysis has shown that in the Sn 3d region the spectrum is similar to that of pristine SnO2, whereas Ni species are present on the surface as NiO, Ni2O3 and Ni(OH)2. Mixing Ni/SnO2 with a small amount of Black Pearls (BP) leads to a significant enhancement of the resulting Ni/SnO2-BP composite activity for nitrite anodic oxidation, presumably due to the higher surface area (115 m2 g-1), to better electrical conductivity and to a certain contribution of the BP to an increase in surface density of the active sites. Ni/SnO2-BP also outperforms pristine BP (in terms of Tafel slopes and electron-transfer rates), most likely due to the fact that the Ni(II)/Ni(III) couple can act as an electrocatalyst for nitrite oxidation. A voltammetric method is proposed for the determination of nitrite, over a concentration range of three orders of magnitude (0.05 to 20 mM), with good reproducibility, high stability and excellent sensitivity. The high upper limit of the dynamic range of the analytically useful response might provide a basis for the reliable quantification of nitrite in wastewater.

RESUMEN

Although both stable free organic radicals and biomass-derived hydrochars have emerged as appealing, green, multifunctional materials, their association has not been explored. In this study, strength is found to lie in their union, which primarily leads to stable redox-active free-radical-hydrochar composites that can generate unexpected opportunities for the development of advanced metal-free sustainable materials. The composites are obtained by a straightforward green one-pot hydrothermal procedure. The loading of stable free radicals of nitroxide type and their localization is engineered by the nature of the carbohydrate and the reaction status; vigorous reaction parameters promote faster nucleation and growth kinetics of the hydrochar products, leading to a covalent immobilization of redox species on the surface of the carbonaceous microspherical aggregates. The nitroxide free-radical-hydrochar materials demonstrate enhancements in terms of both electrocatalytic activity and capacitive features.

RESUMEN

Boron-doped diamond (BDD) electrodes were used to investigate the possibility of detecting N-hydroxysuccinimide (NHS) by linear sweep anodic voltammetry. By increasing the pH the peak potential corresponding to NHS oxidation gradually decreases, suggesting that the electroactive species are the deprotonated ones. An exponential enhancement of the peak current with increasing pH was also observed, indicating that the overall process involves OH--mediated regeneration of these species. The sweep rate effect, together with digital simulation, allowed ascribing the anodic peak to a mechanism consisting of a slow uptake of an electron from the deprotonated NHS species, followed by their catalytic regeneration through a fast chemical reaction. It was also found that in alkaline media the voltammetric response is suitable for analytical applications. A method was proposed for the determination of NHS in the concentration range 5 µM to 10 mM. The good analytical performance characteristics and the wide dynamic range of analytically useful response are also meaningful as they might come in useful in providing a basis for new, electrochemical, approaches for NHS quantification.

RESUMEN

ZnO-carbon composite spheres were synthesized via starch hydrothermal carbonization (HTC) in the presence of a soluble zinc salt (acetate), followed by thermal processing under an argon atmosphere. Besides sustainability, the one-pot procedure represents a scalable synthesis of tailored carbon-metal oxide spheres with a structurally-ordered carbon matrix obtained at a relatively low temperature (700 °C). The ability of zinc cations to develop different linkages with starch's hydrophilic functional groups and to act as external nucleators determines an increase in HTC yield; the effect is obvious even in the presence of small concentrations of zinc in the reaction medium (0.005 M), thus providing a way to improve the carbonization process efficiency. It is also shown that zinc content is the control vector of the spherical composite's properties: a variation from 0.3 to 4.8 at% not only induces a variation in their size (200 nm-10 µm), interconnectivity (from disperse spheres to necklace-like aggregations), surface area and connected porosity (from micro- to mesoporosity), but also of their electrochemical and white light adsorption and emission features. Since the variation in zinc content is made by a simple adjustment of the raw material concentrations, the functionality of these carbon-based materials can be modulated in a straightforward manner.

RESUMEN

A composite obtained by depositing platinum nanoparticles in a polytyramine (PTy) matrix, electrochemically formed on graphite substrate, was used as electrode material for the investigation of phenol oxidation by use of anodic voltammetry. The results show that, in acidic media, the measurement of the oxidation peak current can be used as the basis for a simple, rapid method for the determination of phenol within a concentration range of 0.3-10 mM. A much better resistance to fouling during phenol detection (compared both with smooth platinum and with Pt nanoparticles on bare graphite substrate) is the main advantage of the Pt-PTy composite. These results are also noteworthy because they provide a basis for additional experiments devoted to obtaining new composite materials with improved performances for phenol anodic oxidation.

Asunto(s)

RESUMEN

Boron-doped diamond (BDD) electrodes were used to investigate the possibility of detecting aniline by linear-sweep cathodic stripping voltammetry. It was found that the dimeric species (p-aminodiphenylamine and benzidine) formed by anodic oxidation of aniline during the accumulation period are involved in electrochemically reversible redox processes and, in acidic media, the shape of the stripping voltammetric response is suitable for aniline detection in the micromolar concentration range. The low background current of conductive diamond is an advantage compared to other electrode materials and allows a detection limit of 1muM. Weak adsorption properties and the extreme electrochemical stability are additional advantages of BDD and it was found that, even after long-time measurements, the electrode surface can regain its initial activity by an anodic polarization in the potential region of water decomposition.

RESUMEN

The effect of the pH on the ionic transfer of glycine and beta-alanine at the interface between two immiscible electrolyte solutions (ITIES) was investigated by a simple potentiometric method. Upon addition of small amounts of solution containing the investigated amino acids, a variation of the potential drop across the interface was recorded, which was found to be pH-dependent. This behavior was explained in terms of a preferential orientation of the amino acid molecules at the ITIES, induced by the different lipoficility of the functional groups. The results enabled the measurement of this voltage variation to be used as the basis for a simple and rapid method for determining the isoelectric point of the investigated compounds. The agreement between the pH(i) values thus estimated and those reported in the literature suggests the possibility of using the method for the interpretation of processes occurring at the level of biological membranes.

Asunto(s)