RESUMEN

The importance of the inert environment in the transmission of pathogens has been reassessed in recent years. To reduce cross-contamination, new biocidal materials used in high touch surfaces (e.g., stair railings, door handles) have been developed. However, their impact on skin remains poorly described. The present study aimed to evaluate the antibacterial properties and the risk of skin irritation of two materials based on hard-anodized aluminum (AA) impregnated with quaternary ammonium compound solutions (QAC#1 or QAC#2). The QAC#1 or QAC#2 solutions vary in composition, QAC#2 being free of dioctyl dimethyl ammonium chloride (Dio-DAC) and octyl decyl dimethyl ammonium chloride (ODDAC). Unlike AA used as a control, both AA-QAC#1 and AA-QAC#2 had excellent and rapid antibacterial efficacy, killing 99.9 % of Staphylococcus aureus and Escherichia coli bacteria, in 15 s and 1 min, respectively. The impregnation solutions (QAC#1 and QAC#2) did not show any skin sensitizing effect on transformed human keratinocytes. Nevertheless, these solutions as well as the materials (AA-QAC#1, AA-QAC#2), and the liquid extracts derived from them, induced a very rapid cytotoxicity on L929 murine fibroblasts (>70 % after 1 h of contact) as shown by LDH, MTS and neutral red assays. This cytotoxicity can be explained by the fast QACs release occurring when AA-QAC#1 and AA-QAC#2 were immersed in aqueous medium. To overcome the limitation of assays based on liquid condition, an in vitro skin irritation assay on reconstructed human epidermis (RHE) was developed. The effect of the materials upon their direct contact with the epidermis grown at the liquid-air interface was determined by evaluating tissue viability and quantifying interleukin-1 alpha (IL-1α) which is released in skin during injury or infection. AA-QAC#1 induced a significant decrease in RHE viability, close to OECD and ISO 10993-10 acceptability thresholds and enhanced the pro-inflammatory IL-1α secretion compared with AA-QAC#2. Finally, these results were corroborated by in vivo assays on mice using erythema and edema visual scores, histological observations, and epidermal thickness measurement. AA had no effect on the skin, while a stronger irritation was induced by AA-QAC#1 compared with AA-QAC#2. Hence, these materials were classified as moderate and slight irritants, respectively. In summary, this study revealed that AA-QAC#2 without Dio-DAC and ODDAC could be a great candidate for high touch surface applications, showing an extremely effective and rapid bactericidal activity, without inducing adverse effects for skin tissue.

Asunto(s)

RESUMEN

Infections caused by multidrug-resistant bacteria are a major public health problem. Their transmission is strongly linked to cross contamination via inert surfaces, which can serve as reservoirs for pathogenic microorganisms. To address this problem, antibacterial materials applied to high-touch surfaces have been developed. However, reaching a rapid and lasting effectiveness under real life conditions of use remains challenging. In the present paper, hard-anodized aluminum (AA) materials impregnated with antibacterial agents (quaternary ammonium compounds (QACs) and/or nitrate silver (AgNO3)) were prepared and characterized. The thickness of the anodized layer was about 50 µm with pore diameter of 70 nm. AA with QACs and/or AgNO3 had a water contact angle varying between 45 and 70°. The antibacterial activity of the materials was determined under different experimental settings to better mimic their use, and included liquid, humid, and dry conditions. AA-QAC surfaces demonstrated excellent efficiency, killing >99.9% of bacteria in 5 min on a wide range of Gram-positive (Staphylococcus aureus, Clostridioides difficile, vancomycin-resistant Enterococcus faecium) and Gram-negative (streptomycin-resistant Salmonella typhimurium and encapsulated Klebsiella pneumoniae) pathogens. AA-QACs showed a faster antibacterial activity (from 0.25 to 5 min) compared with antibacterial copper used as a reference (from 15 min to more than 1 h). We show that to maintain their high performance, AA-QACs should be used in low humidity environments and should be cleaned with solutions composed of QACs. Altogether, AA-QAC materials constitute promising candidates to prevent the transmission of pathogenic bacteria on high-touch surfaces.

RESUMEN

Biofilm formation on both animate and inanimate surfaces serves as an ideal bacterial reservoir for the spread of nosocomial infections. Designing surfaces with both superhydrophobic and antibacterial properties can help reduce initial bacterial attachment and subsequent biofilm formation. In the present study, a two-step approach is deployed to fabricate silver-polymethylhydrosiloxane (Ag-PMHS) nanocomposites, followed by a simple dip-coating deposition on anodized Al. Ag-nanoparticles (Ag-NPs) are synthesized in situ within a PMHS polymeric matrix. Morphological features of Ag-PMHS coating observed by scanning electron microscopy shows heterogeneous micro-nano-structures. The chemical compositions of these coatings were characterized using X-ray diffraction and attenuated total reflection-Fourier transform infrared spectroscopy, which indicate the presence of a low-energy PMHS polymer. The as-synthesized Ag-PMHS nanocomposite demonstrated excellent antibacterial properties against clinically relevant planktonic bacteria with zone of inhibition values of 25.3 ± 0.5, 24.8 ± 0.5, and 23.3 ± 3.6 mm for Pseudomonas aeruginosa (P.A) (Gram -ve), Escherichia coli (E. coli) (Gram -ve), and Staphylococcus aureus (S.A) (Gram +ve), respectively. The Ag-PMHS nanocomposite coating on anodized Al provides an anti-biofouling property with an adhesion reduction of 99.0, 99.5, and 99.3% for Pseudomomas aeruginosa (P.A), E. coli, and S. aureus (S.A), respectively. Interestingly, the coating maintained a stable contact angle of 158° after 90 days of immersion in saline water (3.5 wt % NaCl, pH 7.4). The Ag-PMHS nanocomposite coating on anodized Al described herein demonstrates excellent antibacterial and anti-biofouling properties owing to its inherent superhydrophobic property.

RESUMEN

Carbon nanotubes (CNTs) have been used in orthopaedic applications because of their exceptional mechanical properties. However, the influence of CNTs on the behaviour of bone-forming cells and on the ability of these cells to respond to growth factors, such as bone morphogenetic proteins (BMPs), remains poorly known. Therefore, in the present study, single-walled CNTs (SWCNTs) were synthesised using an induction thermal plasma process and purified using a multistep procedure. The impact of these purified SWCNTs on the Smad activation, cell proliferation and differentiation, with or without BMP-2 and BMP-9 (1.92 nM), was also studied using western blot, mitochondrial enzymatic activity, TUNEL, RT-PCR and alkaline phosphatase activity analyses. Pre-treatment of MC3T3-E1 preosteoblasts with SWCNTs accelerated the Smad1/5/8 activation, induced by both BMP-2 and BMP-9, within 15 min. It also slightly affected their proliferation at 48 h without apoptosis. Interestingly, at 72 h, BMP-9 favoured the differentiation of MC3T3-E1 preosteoblasts pretreated with SWCNTs to a larger extent than BMP-2 did. Therefore, the combination of BMP-9 with SWCNTs appears to be a promising avenue for bone applications.

Asunto(s)

RESUMEN

The influence of single-walled carbon nanotubes (SWCNTs) produced by radio frequency (RF) induction thermal plasma with three catalyst mixtures (Ni-Co-Y2 O3 , Ni-Y2 O3 and Ni-Mo-Y2 O3 ) was evaluated on the behavior of murine MC3T3-E1 preosteoblasts. After analyzing SWCNTs properties, mitochondrial enzymatic (MTS) and lactate dehydrogenase (LDH) activities as well as neutral red (NR) uptake were measured to assess the cellular viability. To ascertain that the cytotoxicity was not merely as a result of the mechanical disturbance, either SWCNTs were added on the attached cells or cells were seeded on the SWCNT-covered plates. Regardless of the catalyst mixtures used for their production, SWCNTs added on the attached cells reduced cell viability drastically in a dose-dependent manner. However, the viability of cells seeded on SWCNTs even on those produced with Ni-Co-Y2 O3 was slightly decreased at 24 h and besides cells could proliferate within 48 h. Furthermore, cells were able to organize normal filamentous actin cytoskeleton and no apoptotic cells were detected in the cultures. Thus except mechanical disturbance, thermal plasma grown SWCNTs seem to induce no severe cytotoxicity on MC3T3-E1 preosteoblasts and therefore are considered promising CNTs to be studied more deeply for future applications in bone tissue engineering.

Asunto(s)

RESUMEN

The effect of radio frequency induction thermal plasma (RFITP) process on the cytotoxicity of materials used for single-walled carbon nanotube production remains unknown. In this study, the influence of RFITP process on physicochemical and cytotoxic properties of commercial Co, Ni, Y2O3, Mo catalysts and carbon black was investigated. The cytotoxic assays (MTS, LDH, neutral red, TUNEL) revealed the strongest effect of commercial Co on murine Swiss 3T3 fibroblasts affecting their viability in a dose-dependent manner within 24 h. The cells contained also less actin stress fibres. Although RFITP affects the properties of each catalyst (size, morphology, chemistry), only cytotoxicity of Ni catalyst was increased. The plasma-treated Ni induced apoptosis. Comparing Ni particles before and after RFITP process with commercial nanoparticles of Ni revealed that the particles with similar surface area have different cytotoxicities. Interestingly, the observed toxicity of the catalysts was not mainly due to the release of ions.

Asunto(s)

RESUMEN

Carbon encapsulated magnetic nanoparticles may find many prospective biomedical applications, e.g., in drug and gene delivery systems, disease detection, cancer therapy, rapid toxic cleaning, biochemical sensing, and magnetic resonance imaging. Each of these applications hinges on the relationship between magnetic fields and biological systems. Herein we present the results on the thermal stability of carbon encapsulated magnetic nanoparticles. The products were synthesized by using induction radio frequency (RF) thermal plasma. Phase composition and morphology were studied by powder X-ray diffraction and HRTEM, respectively. Thermal stability was investigated by thermogravimetry and differential thermal analyses. Carbon nanostructures were thermally stable up to 500 K.

Asunto(s)