RESUMEN
Bioactive coatings are usually applied to bone and dental prostheses to enhance the integration and their stability in the bone. Recently, silicon (Si) oxynitride ceramics have been demonstrated to possess osteoconductive properties due to the release of Si ions, particularly important in the early stage of bone formation. In addition, the pattern of the bone contacting surface has been reported to affect cells' differentiation and metabolic activity. In this work, we propose the Breath Figure (BF) process combined with a pyrolysis step, starting from a photo-crosslinkable alkoxy silicone precursor, as a method to realize bioactive patterned coating on metal bone and dental prostheses. Four different surface patterned coatings were applied to Ti4Al6V disks starting from solutions with different precursor concentrations. Morphology, chemical composition, and Si ions' release were evaluated and compared. Moreover, all samples underwent to biological in vitro testing with human mesenchymal stem cells (hMSCs) in comparison with the uncoated titanium alloy. The results indicated that the Si released from the coatings determined an increase in the cellular activity with the BF pattern influencing the hMSCs' initial adhesion and proliferation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1284-1294, 2019.
Asunto(s)
Regeneración Ósea/efectos de los fármacos , Cerámica , Materiales Biocompatibles Revestidos , Ensayo de Materiales , Células Madre Mesenquimatosas/metabolismo , Compuestos de Silicona , Cerámica/química , Cerámica/farmacología , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Preparaciones de Acción Retardada/química , Preparaciones de Acción Retardada/farmacología , Humanos , Células Madre Mesenquimatosas/citología , Compuestos de Silicona/química , Compuestos de Silicona/farmacología , Propiedades de SuperficieRESUMEN
Within this work we define structural properties of the silicon carbonitride (SiCN) and silicon oxycarbide (SiOC) ceramics which determine the reversible and irreversible lithium storage capacities, long cycling stability and define the major differences in the lithium storage in SiCN and SiOC. For both ceramics, we correlate the first cycle lithiation or delithiation capacity and cycling stability with the amount of SiCN/SiOC matrix or free carbon phase, respectively. The first cycle lithiation and delithiation capacities of SiOC materials do not depend on the amount of free carbon, while for SiCN the capacity increases with the amount of carbon to reach a threshold value at ~50% of carbon phase. Replacing oxygen with nitrogen renders the mixed bond Si-tetrahedra unable to sequester lithium. Lithium is more attracted by oxygen in the SiOC network due to the more ionic character of Si-O bonds. This brings about very high initial lithiation capacities, even at low carbon content. If oxygen is replaced by nitrogen, the ceramic network becomes less attractive for lithium ions due to the more covalent character of Si-N bonds and lower electron density on the nitrogen atom. This explains the significant difference in electrochemical behavior which is observed for carbon-poor SiCN and SiOC materials.