RESUMEN

The main hurdle in leveraging microfluidic advantages in membraneless MFCs is their low electrode area-normalized power. For nearly a decade, maximum power densities have remained stagnant, while at the same time macrosystems continue to gather pace. To bridge this growing gap, we showcase a strategy that focuses on (i) technology improvements, (ii) establishment of record areal power densities, and (iii) presentation of different normalization methods that complement areal power densities and enable direct comparisons across all MFC scales. Using a pure-culture Geobacter sulfurreducens electroactive biofilm (EAB) in a new membraneless MFC that adheres to the strategy above, we observed optimal anode colonization, resulting in the highest recorded electrode areal power density for a microfluidic MFC of 3.88 W m-2 (24.37 kW m-3). We also consider new power normalization methods that may be more appropriate for comparison to other works. Normalized by the wetted cross-section area between electrodes accounts for constraints in electrode/electrolyte contact, resulting in power densities as high as 8.08 W m-2. Alternatively, we present a method to normalize by the flow rate to account for acetate supply, obtaining normalized energy recovery values of 0.025 kW h m-3. With these results, the performance gap between micro- and macroscale MFCs is closed, and a road map to move forward is presented.

RESUMEN

The present study reports a detailed life cycle assessment and cost-benefit analysis of a commercially viable Internal-Stack-Trickling Bio-Electrochemical Reactor (IS-TrickBER). IS-TrickBER used wastewater as a feedstock and converted that wastewater through electrochemical methods into low-grade fertilizer and produced electricity. IS-TrickBER was observed for its performance in terms of power output and wastewater treatment. IS-TrickBER exhibited up to 4.2 Wh net energy yield while treating 84.84L wastewater per day along with 92.17% COD removal and 38.23% Columbic efficiency during the operational run with real municipal wastewater. Based on daily net energy yield, up to 1457.6Wh yearly net energy yield can be expected. A comprehensive start-to-end life cycle assessment study associated with the manufacturing, and operational phases of IS-TrickBER was also conducted to ascertain its impact on the environment. The environmental impact through air emissions during the manufacturing stage can be minimized by changing the plastic balls used as packing material in the reactor. A detailed cost-benefit analysis was also conducted to understand its economic viability. Cost-benefit analysis of IS-TrickBER, based on net energy yield, shows that IS-TrickBER could compensate its installation cost within a few years. IS-TrickBER performed well in eliminating the chemical load of wastewater and simultaneous electricity generation. Due to its scalability, compactness, and low maintenance, IS-TrickBER can be a suitable candidate in real-time wastewater treatment.

Asunto(s)

RESUMEN

Increasing untreated environmental outputs from industry and the rising human population have increased the burden of wastewater and other waste streams on the environment. The most prevalent wastewater treatment methods include the activated sludge process, which requires aeration and is, therefore, energy and cost-intensive. The current trend towards a circular economy facilitates the recovery of waste materials as a resource. Along with the amount, the complexity of wastewater is increasing day by day. Therefore, wastewater treatment processes must be transformed into cost-effective and sustainable methods. Microbial fuel cells (MFCs) use electroactive microbes to extract chemical energy from waste organic molecules to generate electricity via waste treatment. This review focuses use of MFCs as an energy converter using wastewater from various sources. The different substrate sources that are evaluated include industrial, agricultural, domestic, and pharmaceutical types. The article also highlights the effect of operational parameters such as organic load, pH, current, and concentration on the MFC output. The article also covers MFC functioning with respect to the substrate, and the associated performance parameters, such as power generation and wastewater treatment matrices, are given. The review also illustrates the success stories of various MFC configurations. We emphasize the significant measures required to fill in the gaps related to the effect of substrate type on different MFC configurations, identification of microbes for use as biocatalysts, and development of biocathodes for the further improvement of the system. Finally, we shortlisted the best performing substrates based on the maximum current and power, Coulombic efficiency, and chemical oxygen demand removal upon the treatment of substrates in MFCs. This information will guide industries that wish to use MFC technology to treat generated effluent from various processes.

RESUMEN

A recent trend in microfluidic microbial fuel cells (MFCs) is to exclude a separation membrane, instead, relying on the physics of laminar flow to maintain isolation between anode and cathode compartments. To avoid solution crossover, the electrodes may be separated by distances of several millimeters, but this negatively affects the internal resistance and undermines a prime advantage of microscale MFCs. Therefore, we propose a facile method for in situ synthesis of a micromembrane that supports sub-millimeter electrode spacing. Membrane synthesis in situ reduces device fabrication complexity, and the proposed design avoids electrode contamination during its synthesis. Comparing results to a state-of-the-art membraneless MFC with 6 mm inter-electrode distances, the sub-millimeter membrane MFC under comparable flow conditions had an internal resistance that was 60% lower, power and current densities that were respectively 45% and 290% higher, and acetate conversion efficiencies that were 8 times higher. The enhanced flow stability provided stable operation under imbalanced flow conditions and delivered continuous increases to power density of up to 30% for flow rate increases of 100 times over baseline levels. As a result, maximum outputs obtained were 660 mW m-1 and 3.5 A m-1. These are the highest reported for microfluidic MFCs using pure culture bacteria, which advances the goal of competing with mainstream MFC formats.

Asunto(s)

RESUMEN

Microbial biofilms are formed by adherence of the bacteria through their secreted polymer matrices. The major constituents of the polymer matrices are extracellular DNAs, proteins, polysaccharides. Biofilms have exhibited a promising role in the area of bioremediation. These activities can be further improved by tuning the parameters like quorum sensing, characteristics of the adhesion surface, and other environmental factors. Organic pollutants have created a global concern because of their long-term toxicity on human, marine, and animal life. These contaminants are not easily degradable and continue to prevail in the environment for an extended period. Biofilms are being used for the remediation of different pollutants, among which organic pollutants have been of significance. The bioremediation of organic contaminants using biofilms is an eco-friendly, cheap, and green process. However, the development of this technology demands knowledge on the mechanism of action of the microbes to form the biofilm, types of specific bacteria or fungi responsible for the degradation of a particular organic compound, and the mechanistic role of the biofilm in the degradation of the pollutants. This review puts forth a comprehensive summary of the role of microbial biofilms in the bioremediation of different environment-threatening organic pollutants.

Asunto(s)

RESUMEN

Environmental pollution has been a continuous threat to sustainable development and global well-being. It has become a significant concern worldwide to combat the ecological crisis using low-cost innovative technologies. Biological oxygen demand (BOD) is a key indicator to comprehend the quality of water to guarantee environmental safety and human health; however, none of the present technologies are capable of online monitoring of the water at the source. Microbial fuel cells (MFC) are a promising technology for simultaneous power generation and wastewater treatment. MFCs have also been shown in fascinating applications to measure and detect the toxic pollutants present in wastewater. These are the bioreactors where exoelectrogenic microorganisms catalyze the conversion of the inherent chemical energy stored in organic compounds to electrical energy. Sensors employ energy conversion to measure BOD, which is considered an international index for the detection of organic material load present in wastewater. The MFC-based BOD sensors have gone through a wide range of advancement from mediator to mediator-less, double chamber to single-chamber, and large size to miniature. There have been detailed studies to improve the accuracy and reproducibility of the sensors for commercial applications. Additionally, multistage MFC-based BOD biosensors and miniature MFC-BOD sensors have also been ubiquitous in recent years. A considerable amount of work has been carried out to improve the performance of these devices by fabricating the proton exchange membranes and altering catalysts at the cathode. However, there remains a dearth for the fabrication of the devices in aspects like suitable microbes, proton exchange membranes, and cheaper catalysts for cathodes for effective real-time monitoring of wastewater. In this review, an extensive study has been carried out on various MFC-based BOD sensors. The efficiency and drawbacks associated with the different MFC-based BOD sensors have been critically evaluated, and future perspectives for their development have been investigated. The breadth of work compiled in this review will accelerate further research in MFC-based BOD biosensors. It will be of great importance to broad ranges of scientific research and industry.

Asunto(s)

RESUMEN

Microbial fuel cells (MFCs) are novel bio-electrochemical device for spontaneous or single step conversion of biomass into electricity, based on the use of metabolic activity of bacteria. The design and use of MFCs has attracted considerable interests because of the potential new opportunities they offer for sustainable production of energy from biodegradable and reused waste materials. However, the associated slow microbial kinetics and costly construction materials has limited a much wider commercial use of the technology. In the past ten years, there has been significant new developments in MFCs which has resulted in several-fold increase in achievable power density. Yet, there is still considerable possibility for further improvement in performance and development of new cost effective materials. This paper comprehensively reviews recent advances in the construction and utilization of novel anodes for MFCs. In particular, it highlights some of the critical roles and functions of anodes in MFCs, strategies available for improving surface areas of anodes, dominant performance of stainless-steel based anode materials, and the emerging benefits of inclusion of nanomaterials. The review also demonstrates that some of the materials are very promising for large scale MFC applications and are likely to replace conventional anodes for the development of next generation MFC systems. The hurdles to the development of commercial MFC technology are also discussed. Furthermore, the future directions in the design and selection of materials for construction and utilization of MFC anodes are highlighted.

Asunto(s)