RESUMEN

High-resolution three-dimensional (3-D) imaging (stereo imaging) by endoscopes in minimally invasive surgery, especially in space-constrained applications such as brain surgery, is one of the most desired capabilities. Such capability exists at larger than 4-mm overall diameters. We report the development of a stereo imaging endoscope of 4-mm maximum diameter, called Multiangle, Rear-Viewing Endoscopic Tool (MARVEL) that uses a single-lens system with complementary multibandpass filter (CMBF) technology to achieve 3-D imaging. In addition, the system is endowed with the capability to pan from side-to-side over an angle of [Formula: see text], which is another unique aspect of MARVEL for such a class of endoscopes. The design and construction of a single-lens, CMBF aperture camera with integrated illumination to generate 3-D images, and the actuation mechanism built into it is summarized.

RESUMEN

We describe a sample-processing micro-reactor that utilizes 60 GHz RF radiation with approximately 730 mW of output power. The instrument design and performance characterization are described and then illustrated with modeling and experimental studies. The micro-reactor's efficiency on affecting hydrolysis of chemical bonds similar to those within large complex molecules was demonstrated: a disaccharide-sucrose-was hydrolyzed completely under micro-reactor conditions. The products of the micro-reactor-facilitated hydrolysis were analyzed using mass spectroscopy and proton nuclear magnetic resonance analytical techniques.

Asunto(s)

RESUMEN

Hybrid Si/III-V, Fabry-Perot evanescent lasers are demonstrated, utilizing InGaAsP as the III-V gain material for the first time to our knowledge. The lasing threshold current of 300-mum-long devices was as low as 24 mA, with a maximal single facet output power of 4.2 mW at 15 degrees C. Longer devices achieved a maximal single facet output power as high as 12.7 mW, a single facet slope efficiency of 8.4%, and a lasing threshold current density of 1 kA/cm2. Continuous wave laser operation was obtained up to 45 degrees C. The threshold current density, output power, and efficiency obtained improve upon those of previously reported devices having a similar geometry. Facet images indicate that the output light is largely confined to the Si waveguide.

RESUMEN

Although gigahertz-scale free-carrier modulators have been demonstrated in silicon, intensity modulators operating at terahertz speeds have not been reported because of silicon's weak ultrafast nonlinearity. We have demonstrated intensity modulation of light with light in a silicon-polymer waveguide device, based on the all-optical Kerr effect-the ultrafast effect used in four-wave mixing. Direct measurements of time-domain intensity modulation are made at speeds of 10 GHz. We showed experimentally that the mechanism of this modulation is ultrafast through spectral measurements, and that intensity modulation at frequencies in excess of 1 THz can be obtained. By integrating optical polymers through evanescent coupling to silicon waveguides, we greatly increase the effective nonlinearity of the waveguide, allowing operation at continuous-wave power levels compatible with telecommunication systems. These devices are a first step in the development of large-scale integrated ultrafast optical logic in silicon, and are two orders of magnitude faster than previously reported silicon devices.