RESUMEN

Background: Contracted subscapularis tears, especially Lafosse grade 3 and 4, pose a significant challenge in surgical repair due to the need for extensive release of retracted tendon and the risk of cut-through due to poor tissue quality. The posterior viewing portal may hinder adequate visualization and extensive release of retracted tendons, particularly in addressing the bursal surface of the tears. Tension-free robust repair is critical to prevent retears and for achieving successful outcomes for these massive and complex retracted tears. This study investigates the clinical outcomes of the Lasso-Loop technique with an anterolateral viewing portal, aiming to enhance tendon release, improve footprint fixation, and optimize tissue grip, particularly in cases of chronic retracted Lafosse 3 and 4 tears. This innovation also eliminates the need for arthroscope switching and serves as a crucial measure for averting axillary nerve injuries during the procedure. Methods: The study included 40 patients with isolated subscapularis or combined anterosuperior rotator cuff tears (Lafosse grade 3 and 4) that underwent arthroscopic subscapularis repair using a Lasso-Loop technique through an anterolateral viewing portal. Evaluations were conducted both preoperatively and at predefined postoperative intervals: 6 weeks, 3 months, 6 months, 1 year, and 2 years. The evaluations in this study encompassed a comprehensive range of clinical assessments, which included a complete range of movements, specialized tests for subscapularis muscle functionality (specifically the lift-off test and belly press test), the utilization of the University of California at Los Angeles and Oxford shoulder scoring systems, and a postoperative ultrasonography conducted at the 6-month mark to assess the presence of any retear. Clinical outcomes were compared with that of the opposite normal shoulder. Results: There was considerable improvement in the active painless range of motion postoperatively. During the 2-year follow-up, the positive belly press test decreased from 50% (n = 20) to 2.5% (n = 1), while the positive lift-off test decreased from 100% (n = 40) to 5% (n = 2). The modified University of California at Los Angeles score increased significantly from 10.15 preoperatively to 30.17 at 2 years postoperatively (P value = .001). Oxford's Shoulder Score increased significantly from 15.6 preoperatively to 40.64 at 2 years postoperatively (P value = .001). Conclusion: This technique has produced positive functional outcomes, in cases categorized as massive subscapularis tears and chronic tears indicating the superiority over other conventional techniques of subscapularis repair described in the literature.

RESUMEN

In this case report, a unique instance of delayed isolated anterior branch axillary nerve injury following shoulder dislocation is highlighted. The patient, a 55-year-old manual laborer, presented with severe deltoid wasting and reduced power 18 months postdislocation, necessitating a specialized treatment approach. The use of axillary nerve neurolysis and an innovative upper trapezius to anterior deltoid transfer via a subacromial path posterior to the clavicle, facilitated by an autologous semitendinosus graft, resulted in significant improvement with 160 degrees of abduction and Grade 4+ power Medical Research Council grading (MRC) at the 5-year follow-up.

Asunto(s)

RESUMEN

The subscapularis is the strongest muscle among the rotator cuff muscles, and it provides a coupled balanced force across the glenohumeral joint by resisting the infraspinatus in axial plane and the shearing force of deltoid in the coronal plane. It is important to repair subscapularis tears to maintain the coupled balanced force. Subscapularis tendon tears are difficult to diagnose and treat. Only a small portion of the subscapularis tendon is visualized during routine arthroscopy, as it is largely covered by the middle and inferior glenohumeral ligaments. Various repair techniques have been described in the literature. Here, we describe the anterolateral viewing portal for better visualization of subscapularis and our preferred technique, the lasso-loop technique, which provides better tissue grip and improved functional outcome.

RESUMEN

OBJECTIVE There has been a transition from long- to short-segment instrumentation for unstable burst fractures to preserve motion segments. Circumferential fixation allows a stable short-segment construct, but the associated morbidity and complications are high. Posterior short-segment fixation spanning one level above and below the fractured vertebra has led to clinical failures. Augmentation of this method by including the fractured level in the posterior instrumentation has given promising clinical results. The purpose of this study is to compare the biomechanical stability of short-segment posterior fixation including the fractured level (SSPI) to circumferential fixation in thoracolumbar burst fractures. METHODS An unstable burst fracture was created in 10 fresh-frozen bovine thoracolumbar spine specimens, which were grouped into a Group A and a Group B. Group A specimens were instrumented with SSPI and Group B with circumferential fixation. Biomechanical characteristics including range of motion (ROM) and load-displacement curves were recorded for the intact and instrumented specimens using Universal Testing Device and stereophotogrammetry. RESULTS In Group A, ROM in flexion, extension, lateral flexion, and axial rotation was reduced by 46.9%, 52%, 49.3%, and 45.5%, respectively, compared with 58.1%, 46.5%, 66.6%, and 32.6% in Group B. Stiffness of the construct was increased by 77.8%, 59.8%, 67.8%, and 258.9% in flexion, extension, lateral flexion, and axial rotation, respectively, in Group A compared with 80.6%, 56.1%, 82.6%, and 121.2% in Group B; no statistical difference between the two groups was observed. CONCLUSIONS SSPI has comparable stiffness to that of circumferential fixation.

Asunto(s)

RESUMEN

STUDY DESIGN: Calf spine model study. PURPOSE: To describe a technique of creating thoracolumbar burst fractures in calf spine model by low weight drop weight. OVERVIEW OF LITERATURE: Burst fractures are one of the commonest types of thoracolumbar fractures and their treatment is controversial. Biomechanical studies aid in the decision of treatment of these fractures. A simple method of creation of burst fractures would help these biomechanical studies. METHODS: Ten specimens of thoracolumbar spines harvested from 6-8 week old calves were weakened at the target vertebra by standardized osteotomy cuts. Burst fractures were created by dropping a 5-kg of weight from a height of 1.2 m using an in-house device. An accelerometer attached to the weight measured the acceleration at the point of impact. RESULTS: Average weight and bone mineral density of the specimens was 390 g and 0.67 g/cm(2), respectively. Computed tomography scan analysis of the fractures revealed McCormack grade 2 and grade 3 fractures in 5 and 3 specimens, respectively, Dennis type 2B in 4, type 2A burst fractures in 5 specimens and fracture dislocation in 1 specimen, AO type A3.1.1 in 4 specimens, type A3.2.2 in 4 and type A3.3.3 in 2 specimens. Vertical laminar split fracture was seen in 6 specimens. Average acceleration and energy at impact was 9.04 m/sec and 54.24 Nm, respectively. CONCLUSIONS: We describe a technique to create thoracolumbar burst fractures in calf spine by a drop weight method using a device that is simple to operate and easy to construct. The method is consistent and produces fractures similar to those occurring naturally, and can be considered as an alternative method for creating burst fractures in biomechanical studies.

RESUMEN

BACKGROUND: Neglected femur fractures are not rare in the developing world. Treatment options include single-stage open reduction and intramedullary nailing, or open release, skeletal traction, and then second-stage open intramedullary nailing, with bone grafting. Single-stage procedures have the potential advantage of avoiding neurovascular complications secondary to acute lengthening, but they require a second operation, with potentially increased resource use and infection risk. QUESTIONS/PURPOSES: We sought to determine the (1) likelihood of union, (2) complications and reoperations, and (3) functional results with single-stage open intramedullary nailing without bone grafting in patients with neglected femur fractures. METHODS: Between January 2003 and December 2007, 17 consecutive patients presented to our practice with neglected femoral shaft fractures. All were treated with single-stage nailing without bone grafting. There were 15 men and two women with a median age of 27 years. The average time from fracture to treatment was 13 weeks (range, 4-44 weeks). Eleven patients underwent open nailing with interlocked nails and six were treated with cloverleaf Kuntscher nails. Patients were followed for a minimum of 6 months (mean, 33 months; range, 6-72 months). The mean preoperative ROM of the knee was 28° (range, 10°-150°) and femoral length discrepancy was 3.1 cm (range, 1-5 cm). RESULTS: All fractures united and the mean time to union was 16 weeks (range, 7-32 weeks). There were no neurologic complications secondary to acute lengthening. The mean postoperative ROM of the knee was 130° (range, 60°-150°). All patients were able to return to preinjury work. Sixteen patients regained their original femoral length. CONCLUSIONS: One-stage open intramedullary nailing of neglected femoral diaphyseal fractures without bone grafting was safe and effective, and obviated the need for a two-stage approach. Although the findings need to be replicated in larger numbers of patients, we believe this technique may be useful in treating patients with this injury, and may offer advantages in resource-constrained environments.

Asunto(s)