RESUMEN

INTRODUCTION: An adolescent girl, aged 12 years 11 months, was evaluated for orthodontic treatment. Her chief complaints included a difficulty with keeping her lips passively closed and excessive gingival exposure upon smiling. Her treatment plan included (1) restriction of maxillary growth with cervical headgear, (2) extraction of the maxillary first premolars to reduce the maxillary protrusion and the mandibular second premolars to facilitate Class II dental correction, and (3) management of maxillary incisor intrusion via anchoring with mini-implants. When indicated, even in the absence of large space discrepancies, extractions can be beneficial to the patient. The final results showed an attractive smile, passive lip seal, and a more esthetic and balanced facial profile. Retention records confirmed the stability of the treatment. The 5-year follow-up visit revealed that the treatment results were quite stable.

Asunto(s)

Implantes Dentales , Maloclusión Clase II de Angle , Métodos de Anclaje en Ortodoncia , Adolescente , Diente Premolar , Cefalometría , Niño , Estética Dental , Femenino , Humanos , Incisivo , Maloclusión Clase II de Angle/terapia , Maxilar , Técnicas de Movimiento Dental

RESUMEN

ABSTRACT Objective: This article describes the orthodontic treatment performed on an adult patient with multiple dental losses. Case report: A female patient, 20 years and 4 months old, presented with the following conditions: absence of teeth #26, #35, #36 and #46; semi-impacted tooth #48; inclined molars adjacent to an edentulous space; canines and premolars in a Class II relationship; a convex profile; biprotrusion; and forced lip sealing. Results: Space in the region of tooth #26 was closed, as well the space of tooth #46; tooth #48 erupted and followed mesial movement passively; space of the region of tooth #35 was maintained for the placement of a dental implant; uprighting of tooth #37 was obtained. Aesthetic and functional goals of the treatment were achieved. Results remained stable 10 years after the end of the treatment. Conclusion: The modified helical loop could be effectively used in orthodontic mechanics to close edentulous spaces. Passive semi-impacted mandibular third molar eruption and mesialization can occur in adults when proper space is provided.

---

RESUMO Objetivo: o presente artigo descreve o tratamento ortodôntico realizado em uma paciente adulta que apresentava múltiplas perdas dentárias. Relato do caso: paciente do sexo feminino com 20 anos e 4 meses de idade, apresentava as seguintes condições: ausência dos dentes #26, #35, #36 e #46; dente #48 semi-impactado; molares adjacentes ao espaço edentado inclinados; relação Classe II de caninos e pré-molares; perfil convexo; biprotrusão; selamento labial forçado. Resultados: foram obtidos o fechamento do espaço da região do dente #26, assim como do #46; o dente #48 irrompeu e acompanhou esse movimento mesial; manutenção do espaço da região do dente #35 para colocação de implante dentário; e verticalização do dente #37. Os objetivos estéticos e funcionais do tratamento foram alcançados. Os resultados alcançados permaneceram estáveis 10 anos após o fim do tratamento. Conclusão: a alça helicoidal modificada pode ser efetivamente usada na mecânica ortodôntica para fechar espaços edêntulos. A erupção passiva e a mesialização de terceiro molar mandibular semi-impactado podem ocorrer em adultos, quando espaço adequado é obtido.

Asunto(s)

Humanos , Femenino , Adulto , Erupción Dental , Diente Impactado , Técnicas de Movimiento Dental , Estética Dental , Mandíbula , Diente Molar , Tercer Molar

RESUMEN

INTRODUCTION: The objective of this study was to determine how different people perceive distinct malocclusions with the use of eye tracking and to compare the results with scores from the subjective visual attractiveness scale (VAS) following 3 grades obtained from the Aesthetic Component of the Index of Orthodontic Treatment Need (AC-IOTN) scale. METHODS: Ninety participants were equally distributed into 3 groups-dentists, orthodontists, and laypeople-and underwent 1 eye-tracking session. After being positioned and calibrated, they were shown 3 dental images. The images reflected the AC-IOTN grades of 1 (close to ideal), 5 (borderline need for treatment), and 8 (definite need for treatment). During the viewing, eye-tracker data were collected for fixation points, duration, and attractiveness (according to the VAS) for each image. The variables were statistically tested with the use of 2-way analysis of variance and complete factorial model (between groups, grades, and for the interactions between them). RESULTS: Grade 1 received the highest subjective score independently from the participant group. This was in contrast to grades 5 and 8, which received similar scores, although the means of fixation points and duration were not significantly different among the grades (P > 0.05). The scores obtained from the dentist group were significantly higher than those from the other groups when the comparison was independent from the grade. In terms of fixation points, there were differences between dentists and orthodontists and between orthodontists and laypeople. The fixation point mean was higher for orthodontists than for dentists and was similar to that for laypeople. CONCLUSIONS: Orthodontists were able to closely analyze the occlusal problems presenting with more severe malocclusions, and the specialists noticed more fixation points. Duration times, however, were not significantly different, because the orthodontists had greater interest, even in situations of unfavorable esthetics.

Asunto(s)

Estética Dental , Indice de Necesidad de Tratamiento Ortodóncico , Maloclusión/terapia , Percepción Visual , Adolescente , Adulto , Anciano , Análisis de Varianza , Actitud del Personal de Salud , Actitud Frente a la Salud , Odontólogos/psicología , Femenino , Humanos , Maloclusión/diagnóstico por imagen , Persona de Mediana Edad , Ortodoncia Correctiva , Ortodoncistas/psicología , Reproducibilidad de los Resultados , Proyectos de Investigación , Adulto Joven

RESUMEN

OBJECTIVE: This article describes the orthodontic treatment performed on an adult patient with multiple dental losses. CASE REPORT: A female patient, 20 years and 4 months old, presented with the following conditions: absence of teeth #26, #35, #36 and #46; semi-impacted tooth #48; inclined molars adjacent to an edentulous space; canines and premolars in a Class II relationship; a convex profile; biprotrusion; and forced lip sealing. RESULTS: Space in the region of tooth #26 was closed, as well the space of tooth #46; tooth #48 erupted and followed mesial movement passively; space of the region of tooth #35 was maintained for the placement of a dental implant; uprighting of tooth #37 was obtained. Aesthetic and functional goals of the treatment were achieved. Results remained stable 10 years after the end of the treatment. CONCLUSION: The modified helical loop could be effectively used in orthodontic mechanics to close edentulous spaces. Passive semi-impacted mandibular third molar eruption and mesialization can occur in adults when proper space is provided.

Asunto(s)

Erupción Dental , Técnicas de Movimiento Dental , Diente Impactado , Adulto , Estética Dental , Femenino , Humanos , Mandíbula , Diente Molar , Tercer Molar

RESUMEN

Treatment of Class II subdivision malocclusion is challenging, and orthodontists frequently struggle to determine the choice of treatment. Several treatment modalities have been proposed for correcting these types of malocclusion. Thus, the aim of this case report is to present dentoalveolar and facial outcomes achieved using an unilateral Forsus fatigue-resistant device combined with fixed appliances in an adult female patient presenting with Class II subdivision malocclusion. Treatment outcome was effective producing dental esthetics and functional positive stable results after 3-year, 2-month follow-up.

RESUMEN

A versatilidade é um recurso técnico que permite sobrecorrigir a maloclusão e personaliza o tratamento ortodôntico, reduzindo a necessidade de introduzir dobras de primeira, segunda e terceira ordem nos fios ortodônticos nas quatro fases do tratamento e pode ser utilizada a partir do estágio inicial até a finalização. O objetivo deste trabalho é descrever o uso da versatilidade do bracket pré-ajustado, do sistema MBT, em um caso clínico de incisivo lateral superior direito em mordida cruzada e com falta de espaço severo para o posicionamento na linha de oclusão. A consideração final é que a colagem do bracket no incisivo lateral superior, sistema MBT com um giro de 180°, no incisivo lateral em palatogressão, apresentou uma biomecânica eficiente na movimentação da raiz para vestibular, proporcionando volume na região alveolar sem a inserção de dobras no arco ortodôntico e com boa intercuspidação e estética dentária e facial (AU)

---

Versatility is a technical feature that allows malocclusion overcorrection, and personalizes the orthodontic treatment, reducing the need to introduce first, second, and third order bends in the orthodontic wires in the four treatment phases, and it can be used from the initial stage until the end. The purpose of this article is to describe the versatility use of the pre-adjusted bracket of the MBT system in a clinical case of cross-bite of the right maxillary lateral incisor and severe lack of space for positioning in the occlusion line. The final consideration is that the bracket bonding to the maxillary lateral incisor, MBT system with a 180° rotation, in palatally displaced maxillary lateral incisor, presented an efficient biomechanics to move the root to the vestibular, providing volume in the alveolar region without the insertion of additional bends in the orthodontic arch wire, and with good intercuspidation and dental and facial aesthetics.(AU)

Asunto(s)

Humanos , Femenino , Niño , Incisivo , Aparatos Ortodóncicos , Torque

RESUMEN

BACKGROUND: This study aimed to simulate the actions of low-pull (LP), high-pull (HP), and combined pull (CP) headgears (HGs) and to analyze tooth movement tendencies through finite element analysis. METHODS: Tomographic slices of a human maxilla with complete permanent dentition were processed by reconstruction software, and the triangular surface mesh was converted into non-uniform rational B-spline (NURBS) curves. An HG facial bow was also modulated in 3D. The teeth and bone were considered to have isotropic and linear behavior, whereas the periodontal ligament was considered to have non-linear and hyperelastic behavior. Data regarding the application points, directions and magnitudes of forces were obtained from the literature and from a dolichofacial patient with class II, division 1 malocclusion, who was treated with a CP HG. RESULTS: The CP HG promoted 37.1 to 41.1 %, and the HP HG promoted 19.1 to 31.9 % of LP distalization. The HP HG presented the highest intrusion, and the LP HG presented the highest extrusion of the first molar. The LP HG contracted the distal side, and the HP and CP HGs contracted the lingual and distobuccal roots of the second molar to a lesser degree. CONCLUSIONS: The LP HG promotes the greatest distalization, followed by the CP and HP HGs; the LP HG causes greater extrusion of the first molar, and the HP HG causes greater intrusion of the first molar. The LP HG causes greater contraction of the second molar than the HP HG.

Asunto(s)

Aparatos de Tracción Extraoral , Análisis de Elementos Finitos , Técnicas de Movimiento Dental/instrumentación , Técnicas de Movimiento Dental/métodos , Proceso Alveolar/fisiología , Fenómenos Biomecánicos , Tomografía Computarizada de Haz Cónico/métodos , Dentición Permanente , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Maloclusión Clase II de Angle/terapia , Maxilar/diagnóstico por imagen , Maxilar/fisiología , Modelos Anatómicos , Modelos Biológicos , Diente Molar/diagnóstico por imagen , Diente Molar/fisiología , Diseño de Aparato Ortodóncico , Ligamento Periodontal/fisiología , Cráneo/anatomía & histología , Cráneo/diagnóstico por imagen , Estrés Mecánico , Raíz del Diente/fisiología

RESUMEN

AIM: By using the finite element method (FEM), this study aimed to evaluate the effect of different corticotomy formats on the distribution and magnitude of stress on the periodontal ligament (PDL) during retraction of the maxillary canine. MATERIALS AND METHODS: A geometric model of the left hemi-jaw was created from computed tomography scan images of a dry human skull and loads were administered during distalization movement of the canine. Three trials were performed: (1) without corticotomy, (2) box-shaped corticotomy and perforations in the cortical bone of the canine (CVC) and (3) CVC and circular-shaped corticotomy in the cortical bone of the edentulous space of the first premolar. RESULTS: There was no difference in stress distribution among the different corticotomy formats. CONCLUSION: Different corticotomy formats used to accelerate orthodontic tooth movement did not affect stress distribution in the PDL during canine retraction. CLINICAL SIGNIFICANCE: From a mechanical perspective, the present study showed that the stress distribution on the PDL during canine retraction was similar in all the corticotomy formats. When using the Andrews T2 bracket, the PDL presented the highest levels of stress in the middle third of the PDL, suggesting that the force was near the center of resistance. Also, as bone weakening by corticotomies did not influence stress distribution, the surgical procedure could be simplified to a less aggressive one, focusing more on inflammatory cellular stimulation than on bone resistance. A simpler surgical act could also be performed by most orthodontists in their practices, enhancing postoperative response and reducing patient costs.

Asunto(s)

Diente Canino , Análisis de Elementos Finitos , Maxilar , Ligamento Periodontal , Humanos , Modelos Anatómicos , Técnicas de Movimiento Dental

RESUMEN

OBJECTIVE: In orthodontic treatment, intrusion movement of maxillary incisors is often necessary. Therefore, the objective of this investigation is to evaluate the initial distribution patterns and magnitude of compressive stress in the periodontal ligament (PDL) in a simulation of orthodontic intrusion of maxillary incisors, considering the points of force application. METHODS: Anatomic 3D models reconstructed from cone-beam computed tomography scans were used to simulate maxillary incisors intrusion loading. The points of force application selected were: centered between central incisors brackets (LOAD 1); bilaterally between the brackets of central and lateral incisors (LOAD 2); bilaterally distal to the brackets of lateral incisors (LOAD 3); bilaterally 7 mm distal to the center of brackets of lateral incisors (LOAD 4). RESULTS AND CONCLUSIONS: Stress concentrated at the PDL apex region, irrespective of the point of orthodontic force application. The four load models showed distinct contour plots and compressive stress values over the midsagittal reference line. The contour plots of central and lateral incisors were not similar in the same load model. LOAD 3 resulted in more balanced compressive stress distribution.

Asunto(s)

Incisivo , Maxilar , Tomografía Computarizada de Haz Cónico , Análisis de Elementos Finitos , Humanos , Ligamento Periodontal

RESUMEN

Objective: In orthodontic treatment, intrusion movement of maxillary incisors is often necessary. Therefore, the objective of this investigation is to evaluate the initial distribution patterns and magnitude of compressive stress in the periodontal ligament (PDL) in a simulation of orthodontic intrusion of maxillary incisors, considering the points of force application. Methods: Anatomic 3D models reconstructed from cone-beam computed tomography scans were used to simulate maxillary incisors intrusion loading. The points of force application selected were: centered between central incisors brackets (LOAD 1); bilaterally between the brackets of central and lateral incisors (LOAD 2); bilaterally distal to the brackets of lateral incisors (LOAD 3); bilaterally 7 mm distal to the center of brackets of lateral incisors (LOAD 4). Results and Conclusions: Stress concentrated at the PDL apex region, irrespective of the point of orthodontic force application. The four load models showed distinct contour plots and compressive stress values over the midsagittal reference line. The contour plots of central and lateral incisors were not similar in the same load model. LOAD 3 resulted in more balanced compressive stress distribution.

---

Objetivo: frequentemente, no tratamento ortodôntico, é necessário o movimento de intrusão dos incisivos superiores. Assim, o objetivo deste estudo é avaliar o padrão de distribuição inicial e magnitude das tensões compressivas no ligamento periodontal (LPD) na simulação da intrusão ortodôntica dos incisivos superiores, considerando os pontos de aplicação da força. Métodos: modelos anatômicos 3D reconstruídos a partir de tomografias computadorizadas de feixe cônico foram utilizados para simular os carregamentos da intrusão dos incisivos superiores. Os pontos eleitos para a aplicação das forças foram: centralizado entre os braquetes dos incisivos centrais (LOAD 1); bilateralmente, entre os braquetes dos incisivos centrais e laterais (LOAD 2); bilateralmente, distal aos braquetes dos incisivos laterais (LOAD 3); bilateralmente, 7mm distal ao centro dos braquetes dos incisivos laterais (LOAD 4). Resultados e Conclusões: as tensões concentraram-se na região apical do LPD, independentemente do ponto de aplicação da força ortodôntica; os quatro modelos de carregamento mostraram distribuição e valores de tensão compressiva distintos na linha mediana sagital de referência; os gráficos de distribuição das tensões não foram similares para os incisivos central e lateral no mesmo modelo de carregamento; o LOAD 3 resultou em uma distribuição mais equilibrada das tensões compressivas.

Asunto(s)

Humanos , Incisivo , Maxilar , Ligamento Periodontal , Análisis de Elementos Finitos , Tomografía Computarizada de Haz Cónico

RESUMEN

INTRODUCTION: Interceptive treatment of Class II, Division 1 malocclusion is a challenge orthodontists commonly face due to the different growth patterns they come across and the different treatment strategies they have available. OBJECTIVE: To report five cases of interceptive orthodontics performed with the aid of Klammt's elastic open activator (KEOA) to treat Class II, Division 1 malocclusion. METHODS: Treatment comprehends one or two phases; and the use of functional orthopedic appliances, whenever properly recommended, is able to minimize dentoskeletal discrepancies with consequent improvement in facial esthetics during the first stage of mixed dentition. The triad of diagnosis, correct appliance manufacture and patient's compliance is imperative to allow KEOA to contribute to Class II malocclusion treatment. RESULTS: Cases reported herein showed significant improvement in skeletal, dental and profile aspects, as evinced by cephalometric analysis and clinical photographs taken before, during and after interceptive orthodontics.

Asunto(s)

Aparatos Activadores , Maloclusión Clase II de Angle/terapia , Diseño de Aparato Ortodóncico , Aparatos Ortodóncicos Funcionales , Ortodoncia Interceptiva/instrumentación , Cefalometría/métodos , Niño , Dentición Mixta , Femenino , Humanos , Incisivo/patología , Masculino , Maxilar/patología , Mordida Abierta/terapia , Planificación de Atención al Paciente , Retrognatismo/terapia , Resultado del Tratamiento

RESUMEN

INTRODUCTION: Interceptive treatment of Class II, Division 1 malocclusion is a challenge orthodontists commonly face due to the different growth patterns they come across and the different treatment strategies they have available.OBJECTIVE: To report five cases of interceptive orthodontics performed with the aid of Klammt's elastic open activator (KEOA) to treat Class II, Division 1 malocclusion.METHODS: Treatment comprehends one or two phases; and the use of functional orthopedic appliances, whenever properly recommended, is able to minimize dentoskeletal discrepancies with consequent improvement in facial esthetics during the first stage of mixed dentition. The triad of diagnosis, correct appliance manufacture and patient's compliance is imperative to allow KEOA to contribute to Class II malocclusion treatment.RESULTS: Cases reported herein showed significant improvement in skeletal, dental and profile aspects, as evinced by cephalometric analysis and clinical photographs taken before, during and after interceptive orthodontics.

---

INTRODUÇÃO: o tratamento interceptor da má oclusão de Classe II primeira divisão é um desafio comum para os ortodontistas, em função dos diferentes padrões de crescimento que podem ser encontrados e das estratégias de tratamento disponíveis.OBJETIVO:apresentar cinco casos de interceptação da má oclusão de Classe II primeira divisão usando o ativador aberto elástico de Klammt (AAEK).MÉTODOS: o tratamento dessa má oclusão pode ser realizado em uma ou duas fases; e a utilização dos aparelhos ortopédicos funcionais, de acordo com suas indicações, pode minimizar as discrepâncias dentoesqueléticas, melhorando, consequentemente, a estética facial na primeira fase da dentição mista. O diagnóstico, a correta confecção do aparelho e a cooperação do paciente são a tríade indispensável para que o AAEK seja um coadjuvante no tratamento dessa má oclusão.RESULTADOS: os casos clínicos apresentaram melhora significativa nos aspectos esquelético, dentário e de perfil, evidenciada pelas análises cefalométricas e, no aspecto clínico, pelas fotografias pré- e trans-tratamento e após a interceptação.

Asunto(s)

Animales , Perros , Femenino , Masculino , Neoplasias de la Corteza Suprarrenal/veterinaria , Adrenalectomía/veterinaria , Enfermedades de los Perros/patología , Laparoscopía/veterinaria , Neoplasias de la Corteza Suprarrenal/cirugía , Adrenalectomía/efectos adversos , Adrenalectomía/mortalidad , Enfermedades de los Perros/mortalidad , Laparoscopía/efectos adversos , Estudios Retrospectivos

RESUMEN

This report describes the orthodontic treatment of a woman, aged 34 years 2 months, with several missing teeth and atrophic mandibular first molar extraction sites. We had planned to close the spaces from the missing maxillary canines with mesial movement of the premolars and molars. In the mandibular arch, protraction of the second molars into first molar extraction sites and reduction of the mandibular incisor protrusion were performed. No miniscrews or bone plates were used. A modified helical loop was used, and it can be considered a simple and an efficient orthodontic method of closing the spaces without mesial or lingual tipping and rotation. Pleasing esthetic and functional results were achieved.

Asunto(s)

Maloclusión/terapia , Cierre del Espacio Ortodóncico/métodos , Pérdida de Diente/terapia , Técnicas de Movimiento Dental/métodos , Adulto , Pérdida de Hueso Alveolar/complicaciones , Cefalometría , Diente Canino/anomalías , Diente Canino/cirugía , Femenino , Humanos , Maloclusión/complicaciones , Mandíbula , Diente Molar/cirugía , Cierre del Espacio Ortodóncico/instrumentación , Extracción Dental , Pérdida de Diente/complicaciones , Técnicas de Movimiento Dental/instrumentación , Raíz del Diente/anomalías , Alveolo Dental/patología

RESUMEN

This case report describes the treatment of a 37-year-old woman with multiple restored and missing teeth, a Class III subdivision malocclusion, and complete dental crossbite. Treatment options included orthognathic surgery and an orthodontic-prosthetic approach. The patient opted for nonsurgical treatment with space opening for prosthetic replacement of the first maxillary molars.

Asunto(s)

Prótesis Dental , Maloclusión de Angle Clase III/terapia , Técnicas de Movimiento Dental/métodos , Adulto , Cefalometría , Terapia Combinada , Femenino , Humanos , Arcada Parcialmente Edéntula/rehabilitación , Diseño de Aparato Ortodóncico , Planificación de Atención al Paciente , Trastornos de la Articulación Temporomandibular/terapia , Pérdida de Diente/rehabilitación , Técnicas de Movimiento Dental/instrumentación , Resultado del Tratamiento

RESUMEN

The aim of this study was to assess the influence of etching and light-curing time on the shear bond strength (SBS) and adhesive remnant index (ARI) of a resin-modified glass ionomer cement (RMGIC) upon debonding of orthodontic brackets. Sixty-eight bovine permanent incisors were obtained and embedded in acrylic resin. Edgewise metallic brackets were bonded to the teeth with Fuji Ortho LC RMGIC. The specimens were randomly assigned to 4 groups, using the following etching and light-curing times: G1: 10% polyacrylic acid and 40 s (control); G2: 37% phosphoric acid and 40 s; G3: 10% polyacrylic acid and 50 s; and G4: 37% phosphoric acid and 50 s. Shear test was performed at 0.5 mm/min and the ARI was assessed. G2 (3.6 ± 0.98 MPa) presented significantly higher (p<0.05) SBS than G1 (2.76 ± 0.86 MPa) and G4 (2.86 ± 0.68 MPa), and there was no statistically significant difference (p>0.05) between G2 and G3 (2.94 ± 0.67 MPa). ARI presented prevalence of scores 2 and 3 in all groups. RMGIC SBS enhanced with 37% phosphoric acid etching and 40 s light-curing time, but this did not occur when the light-curing time was increased, regardless of the acid used. RMGIC presented prevalence of failures at the adhesive/bracket interface.

Asunto(s)

Grabado Ácido Dental/métodos , Recubrimiento Dental Adhesivo , Cementos de Ionómero Vítreo , Curación por Luz de Adhesivos Dentales/métodos , Resinas Acrílicas , Silicatos de Aluminio , Animales , Bovinos , Desconsolidación Dental , Análisis del Estrés Dental , Cementos de Ionómero Vítreo/química , Ensayo de Materiales , Soportes Ortodóncicos , Resistencia al Corte , Factores de Tiempo

RESUMEN

The aim of this study was to assess the influence of etching and light-curing time on the shear bond strength (SBS) and adhesive remnant index (ARI) of a resin-modified glass ionomer cement (RMGIC) upon debonding of orthodontic brackets. Sixty-eight bovine permanent incisors were obtained and embedded in acrylic resin. Edgewise metallic brackets were bonded to the teeth with Fuji Ortho LC RMGIC. The specimens were randomly assigned to 4 groups, using the following etching and light-curing times: G1: 10 percent polyacrylic acid and 40 s (control); G2: 37 percent phosphoric acid and 40 s; G3: 10 percent polyacrylic acid and 50 s; and G4: 37 percent phosphoric acid and 50 s. Shear test was performed at 0.5 mm/min and the ARI was assessed. G2 (3.6 ± 0.98 MPa) presented significantly higher (p<0.05) SBS than G1 (2.76 ± 0.86 MPa) and G4 (2.86 ± 0.68 MPa), and there was no statistically significant difference (p>0.05) between G2 and G3 (2.94 ± 0.67 MPa). ARI presented prevalence of scores 2 and 3 in all groups. RMGIC SBS enhanced with 37 percent phosphoric acid etching and 40 s light-curing time, but this did not occur when the light-curing time was increased, regardless of the acid used. RMGIC presented prevalence of failures at the adhesive/bracket interface.

---

O objetivo desta pesquisa foi avaliar a influência do condicionamento ácido e do tempo de fotopolimerização na Resistência Adesiva (RA) e no Índice de Adesivo Remanescente (IAR) do Cimento Ionômero de Vidro Modificado por Resina (CIVMR). Sessenta e oito incisivos permanentes de bovinos foram obtidos e incluídos em resina acrílica. Bráquetes metálicos edgewise foram colados nesses corpos de prova com o CIVMR Fuji Ortho. A amostra foi dividida em 4 grupos, utilizando os seguintes condicionamentos ácidos e tempos de fotopolimerização: G1- Ácido poliacrílico a 10 por cento e 40 s (controle); G2- Ácido fosfórico a 37 por cento e 40 s; G3- Ácido poliacrílico a 10 por cento e 50 s; e G4- Ácido fosfórico a 37 por cento e 50 s. O teste de cisalhamento foi realizado a 0,5 mm/min e o IAR avaliado. O G2 (3,6 ± 0,98 MPa) apresentou RA estatisticamente maior que o G1 (2,76 ± 0,86 MPa) e o G4 (2,86 ± 0,68 MPa) (p<0,05), e não houve diferença estatística entre G2 e G3 (2,94 ± 0,67 MPa) (p>0,05). O IAR apresentou prevalência dos escores 2 e 3 em todos os grupos. A RA do CIVMR aumenta com condicionamento com ácido fosfórico a 37 por cento e 40 s de fotopolimerização, mas isto não ocorre quando o tempo de fotopolimerização é aumentado, independente do tipo de ácido utilizado; e o CIVMR apresenta prevalência de fratura na interface adesivo/bráquete.

Asunto(s)

Animales , Bovinos , Grabado Ácido Dental/métodos , Recubrimiento Dental Adhesivo , Cementos de Ionómero Vítreo , Curación por Luz de Adhesivos Dentales/métodos , Resinas Acrílicas , Silicatos de Aluminio , Desconsolidación Dental , Análisis del Estrés Dental , Cementos de Ionómero Vítreo/química , Ensayo de Materiales , Soportes Ortodóncicos , Resistencia al Corte , Factores de Tiempo

RESUMEN

This case report describes the treatment of a girl, aged 13.3 years, with a concave face and a Class I relationship on the right and Class III on the left at the first molars. The left canines were in full Class II occlusion. The overbite was excessive at 80%. The maxillary dental midline was deviated 2.0 mm to the right, and the mandibular dental midline was 3.0 mm on the opposite side with a 5-mm deviation between both arches. There was a -2-mm mandibular arch length discrepancy, but, considering the intrabony left second premolar with root-delayed development, the arch length discrepancy was -8 mm. The incisors were also retroclined. A nonextraction treatment plan was used. When space to the left of the intrabony second premolar was opened, the tooth erupted passively, and the root had a normal length. The esthetic results were functional and pleasing.

Asunto(s)

Asimetría Facial/complicaciones , Maloclusión/complicaciones , Ortodoncia Correctiva/métodos , Raíz del Diente/fisiopatología , Adolescente , Diente Premolar/fisiopatología , Cefalometría , Asimetría Facial/terapia , Femenino , Humanos , Maloclusión/terapia , Mandíbula , Erupción Dental , Resultado del Tratamiento

RESUMEN

Em um paciente do gênero masculino com 15 anos de idade, Classe II, divisão 2, sub-divisão D, com sobremordida exagerada, as principais questões consideradas no plano de tratamento ortodôntico foram a possibilidade de um padrão de crescimento esquelético favorável e a cooperação do mesmo. Foi utilizado braquete com canal de encaixe "0.022 x 0.028" edgewise e aparelho extra-bucal com puxada cervical no início e gancho de forma de "J", com puxada alta no final de tratamento. Objetivou-se a oclusão Classe I de molares e caninos com sobremordida e sobressaliência e o perfil harmonioso

Asunto(s)

Humanos , Masculino , Adolescente , Terapéutica

RESUMEN

O objetivo deste estudo foi o de avaliar a existência de correlação entre o modo respiratório e as dimensões craniofacias, verticais e horizontais, em escolares da rede estadual de ensino da cidade de Curitiba. Fizeram parte da amostra 74 crianças com maloclusão Classe II, divisão 1 de Angle, sendo 34 do gênero feminino e 40 do masculino, na faixa etária de 6 a 9 anos, com idade média de 7 anos e 11 meses. Conforme o modo respiratório, os indivíduos da amostra foram divididos em dois grupos: respiradores predominantemente nasais e respiradores predominantemente bucais. Foram realizadas telerradiografias em norma lateral de todos os indivíduos e, para a comparação cefalométrica, foram utilizadas 8 grandezas angulares e 3 lineares. Os resultados foram submetidos à análise de variância (p<0,05), e constatou-se que, no grupo de respiradores predominantemente bucais, a altura facial anterior (AFH) é maior e o índice de altura facial (FHI) é menor que a registrada no grupo de respiradores predominantemente nasais. No entanto, sugere-se mais estudos sobre o método de diagnóstico do modo respiratório, bem como mais estudos longitudinais para que melhor se possa correlacionar o modo respiratório e as dimensões craniofaciais.

Asunto(s)

Humanos , Masculino , Femenino , Niño , Cefalometría , Maloclusión Clase II de Angle , Respiración por la Boca , Respiración

RESUMEN

A mordida cruzada anterior dentária, envolvendo um ou dois dentes permanentes é uma maloclusão comumente diagnosticada em crianças no ínicio da dentição mista. A totoalidade dos autores orienta e preconiza a correção desta mordiada cruzada ou quanto antes ou quando diagnosticada, e desde que sejam observados os pré-requisitos essenciais de cooperação no uso de aparelho recomendado e espaço suficiente para a movimentação em direção à linha de oclusão. A ciência e arte devem ser criteriosamente empregadas na Ortodontia interceptativa para reconhecer e eliminar potenciais irregularidades e os mal posicionamentos no complexo dentofacial em desenvolvimento

Asunto(s)

Humanos , Masculino , Niño , Maloclusión/diagnóstico , Maloclusión/prevención & control , Maloclusión/terapia , Aparatos Ortodóncicos Removibles , Ortodoncia Interceptiva