RESUMEN

There is an increasing concern about the presence of various types of pharmaceuticals in drinking water, as long-term exposure of people to even low concentrations of drugs can lead to many problems, such as endocrine disorders or drug resistance. As the removal in sewage treatment plants is not effective enough, as indicated, among others, by the EC and OECD reports, it is justified to search for new materials that will allow for an effective and rapid reduction of these pollutants in water. Therefore, in our work, catalytically active nanomaterials containing platinum group metals (PGMs) were synthesized from model and real multicomponent solutions and examined in reactions of organic compounds. The nanoparticles (NPs) were obtained from real solutions from the hydrometallurgical processing of spent automotive converters (SACs), and to the best of our knowledge, the novelty of the proposed paper is the application of solutions from SAC processing as precursors for PGM-NPs. The synthesized PGM-NPs were deposited on a support (TiO2), characterized and, finally, examined as nanocatalysts in a degradation reaction of ibuprofen (IB) from model aqueous solutions. The degree of IB degradation reached more than 90%. The main products of IB degradation were p-isobutylphenol and CO2.

Asunto(s)

Nanopartículas , Contaminantes Químicos del Agua , Humanos , Ibuprofeno , Metales , Agua , Contaminantes Químicos del Agua/análisis

RESUMEN

This article presents studies on the precipitation of Pt, Pd, Rh, and Ru nanoparticles (NPs) from model and real multicomponent solutions using sodium borohydride, ascorbic acid, sodium formate, and formic acid as reducing agents and polyvinylpyrrolidone as a stabilizing agent. As was expected, apart from PGMs, non-precious metals were coprecipitated. The influence of the addition of non-precious metal ions into the feed solution on the precipitation yield and catalytic properties of the obtained precipitates was studied. A strong reducing agent, NaBH4 precipitates Pt, Pd, Rh, Fe and Cu NPs in most cases with an efficiency greater than 80% from three- and four-component model solutions. The morphology of the PGMs nanoparticles was analyzed via SEM-EDS and TEM. The size of a single nanoparticle of each precipitated metal was not larger than 5 nm. The catalytic properties of the obtained nanomaterials were confirmed via the reaction of the reduction of 4-nitrophenol (NPh) to 4-aminophenol (NAf). Nanocatalysts containing Pt/Pd/Fe NPs obtained from a real solution (produced as a result of the leaching of spent automotive catalysts) showed high catalytic activity (86% NPh conversion after 30 min of reaction at pH 11 with 3 mg of the nanocatalyst).

Asunto(s)

Metales , Nanopartículas , Catálisis , Paladio/química , Platino (Metal)

RESUMEN

The paper presents the possibility of recovering metals from printed circuit boards (PCBs) of spent mobile phones using the hydrometallurgical method. Two-stage leaching of Cu(II), Fe(III), Sn(IV), Zn(II), Ni(II) and Pb(II) with H2SO4 (2 and 5 M) and HNO3 (2 M) with the addition of H2O2 (10 and 30%) and O3 (9 or 15 g/h) was conducted at various process conditions (temperature-313, 333 and 353 K, time-60, 120, 240, 300 min, type and concentration of leaching agent, type and concentration of oxidant, solid-liquid ratio (S/L)), allowing for a high or total metals leaching rate. The use of two leaching stages allows for the preservation of selectivity, separation and recovery of metals: in the first stage of Fe(III), Sn(IV) and in the second stage of the remaining tested metal ions, i.e., Cu(II), Zn(II), Ni(II) and Pb(II). Removing Fe from the tested PCBs' material at the beginning of the process eliminates the need to use magnetic methods, the purpose of which is to separate magnetic metal particles (ferrous) from non-magnetic (non-ferrous) particles; these procedures involve high operating costs. Since the leaching of Cu(II) ions with sulfuric(VI) acid practically does not occur (less than 1%), this allows for almost complete transfer of these ions into the solution in the second stage of leaching. Moreover, to speed up the process and not generate too many waste solutions, oxidants in the form of hydrogen peroxide and ozone were used. The best degree of leaching of all tested metal ions was obtained when 2 M sulfuric(VI) acid at 353 K was used in the 1st research stage, and 2 M nitric(V) acid and 9 g/h O3 at 298 K in the 2nd stage of leaching, which allowed it to be totally leached 100% of Fe(III), Cu(II), Sn(IV), Zn(II), Ni(II) and 90% Pb(II).

RESUMEN

The paper presents basic studies on the precipitation of platinum, palladium, rhodium, and ruthenium nanoparticles from model acidic solutions using sodium borohydride, ascorbic acid, and sodium formate as reducing agents and polyvinylpyrrolidone as a stabilizing agent. The size of the obtained PGM particles after precipitation with NaBH4 solution does not exceed 55 nm. NaBH4 is an efficient reducer; the precipitation yields for Pt, Pd, Ru, Rh are 75, 90, 65 and 85%, respectively. By precipitation with ascorbic acid, it is possible to efficiently separate Pt, Rh, and Ru from Pd from the two-component mixtures. The obtained Pt, Pd, and Rh precipitates have the catalytic ability of the catalytic reaction of p-nitrophenol to p-aminophenol. The morphological characteristic of the PGM precipitates was analyzed by AFM, SEM-EDS, and TEM.

RESUMEN

Recovery of platinum group metals (PGM) from complex aqueous solutions generated as a result of leaching of various spent materials (e.g., spent automotive converters) is a vital issue in the context of the circular economy. In this study pyridinium derivatives containing an imidoamide or imine moiety (i.e., 3-[1-(2-ethylhexyloxyimine)methane]-1-propylpyridinium chloride, 3-[1-(decyloxyimine)methane]-1-propylpyridinium chloride, 3-[1-(decyloxyimine)ethane]-1-propylpyridinium chloride and 4-[1-amine(2-ethylhexyloxyimine)]-1-propylpyridinium chloride) are proposed as novel extractants for recovery of palladium(II) and platinum(IV) from model chloride aqueous solutions. The results of liquid-liquid extraction from one-component solutions of palladium(II) or platinum(IV) showed that quaternary pyridinium salts can be used as effective extractants for platinum metal ions. Moreover, PGM extraction from a two-component mixture proved no evident selectivity in the transfer of one of the metal ions to the organic phase. As the best extractant among the investigated ones, D3EI-PrCl (with straight alkyl chain at substituent) can be pointed out, however, problems with effective stripping or phase disengagement after stripping should be indicated as a drawback of the organic phases used. Further investigation should focus on the improvement of the organic phase properties (e.g., increase in hydrophobicity of the extractants and addition of an organic phase modifier) towards stripping efficiency.