RESUMEN
In this study, an air bubbling electroless plating (ELP) method was newly developed for the production of Pd composite membranes. The air bubble ELP alleviated the concentration polarization of Pd ions, making it possible to achieve a plating yield of 99.9% in 1 h and form very fine Pd grains with a uniform layer of â¼4.7 µm. A membrane with a diameter of 25.4 mm and a length of 450 mm was produced by the air bubbling ELP, achieving a hydrogen permeation flux of 4.0 × 10-1 mol m-2 s-1 and selectivity of â¼10 000 at 723 K with a pressure difference of 100 kPa. To confirm the reproducibility, six membranes were produced by the same method and assembled in a membrane reactor module to produce high-purity hydrogen by ammonia decomposition. Hydrogen permeation flux and selectivity of the six membranes at 723 K with a pressure difference of 100 kPa were 3.6 × 10-1 mol m-2 s-1 and â¼8900, respectively. An ammonia decomposition test with an ammonia feed rate of 12 000 mL min-1 showed that the membrane reactor produced hydrogen with >99.999% purity and a production rate of 1.01 Nm3 h-1 at 748 K with a retentate stream gauge pressure of 150 kPa and a permeation stream vacuum of -10 kPa. The ammonia decomposition tests confirmed that the newly developed air bubbling ELP method affords several advantages, such as rapid production, high ELP efficiency, reproducibility, and practical applicability.
RESUMEN
The vanadium redox flow battery is considered one of the most promising candidates for use in large-scale energy storage systems. However, its commercialization has been hindered due to the high manufacturing cost of the vanadium electrolyte, which is currently prepared using a costly electrolysis method with limited productivity. In this work, we present a simpler method for chemical production of impurity-free V3.5+ electrolyte by utilizing formic acid as a reducing agent and Pt/C as a catalyst. With the catalytic reduction of V4+ electrolyte, a high quality V3.5+ electrolyte was successfully produced and excellent cell performance was achieved. Based on the result, a prototype catalytic reactor employing Pt/C-decorated carbon felt was designed, and high-speed, continuous production of V3.5+ electrolyte in this manner was demonstrated with the reactor. This invention offers a simple but practical strategy to reduce the production cost of V3.5+ electrolyte while retaining quality that is adequate for high-performance operations.
RESUMEN
In the semiconductor industry, perfluorinated compound removal is a major concern owing to the formation of highly toxic and hazardous hydrogen fluoride (HF) as a by-product. Calcium oxide (CaO) can be considered a promising material for HF sorption reaction process. However, the easier reaction between CaO and H2O results in the formation of Ca(OH)2, which ultimately limits the usefulness of CaO. The objective of the research work is preparation of CaO nanoparticles on hydrophobic silica (SiO2) to use as a alternative solid reducing catalyst for efficient HF removal process. High-resolution transmission electron microscopy micrographs confirmed that the as-prepared CaO particles are <5â¯nm in size and the smaller sized CaO nanoparticles are homogeneously anchored on the entire surface of â¼100â¯nm spherical SiO2 nanoparticles. The reaction-enhanced regenerative catalytic system (RE-RCS) was used to measure the HF removal efficiency. HF is removed more efficiently using CaO on SiO2 than using CaO alone. At the outlet of the RE-RCS, the obtained HF concentrations are 2811.4 and 2166.1â¯ppm after a 3â¯h reaction using CaO and CaO on SiO2 as the sorbent, respectively. The lower concentration of HF at the outlet of the system using CaO on SiO2 indicates that HF sorption is remarkably enhanced using CaO on SiO2 inside the RE-RCS. In addition, the presence of a hydrophobic region in the catalyst sorbent prevents the reaction between CaO and water, which leads to avoiding the formation of Ca(OH)2. These phenomena significantly enhance the HF removal efficiency and CaF2 formation process.
Asunto(s)
Ácido Fluorhídrico , Residuos Industriales , Compuestos de Calcio , Óxidos , Sustancias Reductoras , Dióxido de Silicio , Aguas Residuales , AguaRESUMEN
Mesoporous silica and titania supraparticles with controllable pore size, particle size, and macroscopic morphology were readily synthesized by a novel synthetic pathway using meniscus templating on a superhydrophobic surface, which is much simpler than well-known emulsion systems. Moreover, we first report that despite the very large radius of droplet curvature on a millimeter scale, supraparticles kept the round cap morphology due to addition of sucrose as a shape preserver as well as a pore-forming agent. In addition, mesoporous silica and titania supraparticles provided good adsorption performance for Acid Blue 25 and Cr(VI), and were easily separated from the solution by using a scoop net after adsorption tests.