Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros











Intervalo de año de publicación
1.
Heliyon ; 10(15): e35091, 2024 Aug 15.
Artículo en Inglés | MEDLINE | ID: mdl-39170354

RESUMEN

The effect of hot isostatic pressing (HIP) on the microstructure and properties of hot dip aluminum coating cooled in a magnetic field was investigated in this study. In order to improve the microstructure and properties of magnetic dip aluminum coating, hot isostatic pressing technology was used for post-treatment. Initially, a traditional aluminum-impregnated coating was prepared on the surface of titanium alloy TA15, an alternating electromagnetic field was applied during the forming and solidification process of the coating. Finally, the coating was treated with hot isostatic pressing technology. Analyzed three different coatings of the microstructure and element distribution, and tested the microhardness of the coatings at various positions. The test results revealed that the TA15 titanium alloy hot-dip aluminum coatings obtained through the three different processes exhibited a gradient structure. Compared with the traditional hot-dipped aluminum air-cooled coating, when an appropriate intensity of alternating electromagnetic field was applied during the coating solidification process, the outer coating structure was enhanced, the number of holes was reduced, the microstructure density increased, and the number of cracks significantly decreased. The defects of the 800 °C hot isostatic magnetic cold and hot dip aluminum coating were repaired under high temperature and pressure, resulting in a uniform and fine microstructure. The comprehensive properties of the magnetic cold and hot dip aluminum coating on the surface of the titanium alloy were effectively enhanced through hot isostatic pressing.

2.
Artículo en Chino | WPRIM (Pacífico Occidental) | ID: wpr-933623

RESUMEN

Objective:To evaluate multi-channel transcatheter embolotherapy for type Ⅱ endoleak originating from lumbar arteries after endovascular abdominal aortic aneurysm repair (EVAR).Methods:Data of 8 cases of type Ⅱ endoleak after EVAR from Oct 2017 to Nov 2020 at the Department of Vascular and Endovascular Surgery, Henan Provincial People's Hospital were retrospectively analyzed.Results:All patients who suffered from type Ⅱ endoleak that originated from lumbar arteries after EVAR were successfully treated with coils and mixture of Compant medical glue and iodipin through multi-channel. The technical success rate was 100%, the operative time was 80-150 min. Right lower limb dyskinesia occurred in 1 patient after operation, the symptom disappeared by anticoagulation and trophic neurotherapy for 2 months. Type Ⅱ endoleak didn't recur in all patients, and no mortality during the 4-38(14.1) months follow-up period.Conclusion:Multi-channel transcatheter embolotherapy has definite effects for the treatment of type Ⅱ endoleak from lumbar arteries after EVAR, with high technical feasibility, few perioperative complications, low mortality among other advantages. The results of short and medium term are satisfactory.

3.
Artículo en Chino | WPRIM (Pacífico Occidental) | ID: wpr-956990

RESUMEN

Objective:To study the treatment outcomes of transjugular intrahepatic portal shunt (TIPS) on refractory hepatic sinus obstruction syndrome (HSOS) caused by Gynura segetum.Methods:The clinical data of 15 patients with refractory HSOS caused by Gynura segetum treated at the Department of Vascular Surgery, Henan Provincial People's Hospital from January 2017 to April 2021 were retrospectively analyzed. There were 7 males and 8 females, with ages ranging from 30 to 85 years, mean ± s. d. (61.2±14.1) years. Albumin, alanine aminotransferase, aspartate aminotransferase, alkaline phosphatase, glutamyl transferase, and portal vein pressure were compared before and after TIPS. The liver function and renal function of these patients were followed up.Results:When compared with pre-operation, the albumin, alanine aminotransferase, aspartate aminotransferase and other indexes were significantly improved after TIPS (all P<0.05). The portal vein pressure of 15 patients significantly decreased from the preoperative volume of (41.7±3.5) cmH 2O (1 cmH 2O=0.098 kPa) to (28.3±4.4) cmH 2O ( t=10.41, P<0.001). The preoperative liver function was Child-Pugh grade A in 1 patient, grade B in 8 patients, grade C in 6 patients. The postoperative Child-Pugh grading was grade A in 14 patients and grade B in 1 patient. Ascites, gastrointestinal bleeding, abdominal pain, abdominal distention and spontaneous peritonitis all disappeared in these 15 patients. Postoperative hepatic encephalopathy developed in 2 patients and hepatic myelopathy in 1 patient. Conclusion:TIPS for treatment of HSOS caused by Gynura segetum resulted in a rapid recovery of liver function, rapid symptomatic relief, with a low incidence of hepatic encephalopathy/hepatic myelopathy.

4.
Artículo en Chino | WPRIM (Pacífico Occidental) | ID: wpr-958431

RESUMEN

Objective:To summarize the clinical experience and effect of applying 3D printing assisted with the technology of extracorporeal pre-fenestration in the treatment of thoracic/abdominal aortic aneurysm.Methods:From August 2019 to November 2020, 15 patients with thoracic/abdominal aneurysm involving visceral arteries were admitted to our center, including 11 males and 4 females, with mean age of 57-82(68.26 ±4.73) years old. According to diameters of visceral artery, thoracic aorta, abdominal aorta, and bilateral iliac arteries measured by CTA, we selected suitable stents and made a 3D printing model by professional software to guide the position of intraoperative external fenestration and the fenestration diameter to implement full cavity repair.Results:All operations were completed and one case was converted to laparotomy. The average time of operations was(200.67±41.00)min and hospital stay was(13.47±4.16)days without any death, organ failure, endoleak, paraplegia, graft infection and other complications.Conclusion:The application of 3D printing assisted with the technology of extracorporeal pre-fenestration in the treatment of thoracic/abdominal aortic aneurysm is feasible and effective, and the short-term results are satisfactory.

5.
Artículo en Chino | WPRIM (Pacífico Occidental) | ID: wpr-907780

RESUMEN

Objective:To investigate the effect of free anterolateral thigh perforator flap on repair of bone exposure of diabetic foot ulcer.Methods:From Sep. 2016 to Dec. 2019, free anterolateral thigh perforator flap was used to repair 19 cases of diabetic foot ulcer with bone exposure. The area of the flap ranged from 5.0 cm×7.0 cm to 10.0 cm×16.0 cm. The donor site of the flap was sutured directly. The patients were followed up regularly by outpatient and telephone.Results:18 of the 19 cases survived completely, in one case, most of the flap were necrotic, healed after second stage skin grafting; 5 flaps developed edema due to low albumin, and healed after stitches removal, dehydration, albumin supplement and secondary suture and antibiotic replacement. Through 6 to 24 months of follow-up study we concluded that flap transfer could functionally and morphologically repair wounds with soft tissue defect and infection.Conclusion:Free anterolateral thigh perforator flap is effective in repairing diabetic foot ulcer and can effectively reduce disability rate.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA