RESUMEN
Famotidine (FMT) is an orally administered histamine H2-receptor blocker with limited bioavailability since it exhibits low solubility and low permeability. In addition, the recent withdrawal of ranitidine from the market, makes famotidine an interesting candidate to obtain solid forms with improved pharmacokinetic performance. In this work, crystal engineering concepts and the co-amorphous formation strategy were applied to obtain two novel solids. Crystalline famotidine malate (FMT-MT) and a vitreous phase (FMT-MTa) were prepared by solvent evaporation and mechanochemical synthesis, respectively. FMT-MT (monoclinic, S.G. P21/n) crystallizes with one FMT and one co-former molecules in the asymmetric unit forming a (R228) structural motif. FMT-MT resulted in a salt by proton transfer from one malic carboxylic group to the guanidine moiety of FMT. The three-dimensional packing is described as undulating layers of alternated FMT+ and MT- running along the a direction. FMT-MTa shows the inherent features of amorphous phases according to powder X-ray diffraction and DSC analysis. The higher physical stability was found for amorphous samples maintained at 4 °C up to 60 days. The solubility assays in water, indicate that FMT-MT and FMT-MTa are 2.02 and 2.68-fold more soluble than the marketed polymorph, whereas similar values were obtained in simulated gastric fluid.
Asunto(s)
Famotidina , Malatos , Famotidina/química , Solubilidad , Antagonistas de los Receptores H2 de la Histamina , Difracción de Rayos X , Rastreo Diferencial de Calorimetría , Estabilidad de Medicamentos , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Drug encapsulation in nanocarriers such as polymeric nanoparticles (Nps) may help to overcome the limitations associated with cannabinoids. In this study, the authors' work aimed to highlight the use of electrospraying techniques for the development of carrier Nps of anandamide (AEA), an endocannabinoid with attractive pharmacological effects but underestimated due to its unfavourable physicochemical and pharmacokinetic properties added to its undesirable effects at the level of the central nervous system. The authors characterised physicochemically and evaluated in vitro biological activity of anandamide/É-polycaprolactone nanoparticles (Nps-AEA/PCL) obtained by electrospraying in epithelial cells of the human proximal tubule (HK2), to prove the utility of this method and to validate the biological effect of Nps-AEA/PCL. They obtained particles from 100 to 900â nm of diameter with a predominance of 200-400â nm. Their zeta potential was -20 ± 1.86â mV. They demonstrated the stable encapsulation of AEA in Nps-AEA/PCL, as well as its dose-dependent capacity to induce the expression of iNOS and NO levels and to decrease the Na+/K+ ATPase activity in HK2 cells. Obtaining Nps-AEA/PCL by electrospraying would represent a promising methodology for a novel AEA pharmaceutical formulation development with optimal physicochemical properties, physical stability and biological activity on HK2 cells.
Asunto(s)
Ácidos Araquidónicos/química , Endocannabinoides/química , Nanopartículas/química , Poliésteres/química , Alcamidas Poliinsaturadas/química , Ácidos Araquidónicos/farmacología , Línea Celular , Supervivencia Celular/efectos de los fármacos , Fenómenos Químicos , Estabilidad de Medicamentos , Técnicas Electroquímicas , Endocannabinoides/farmacología , Humanos , Nanopartículas/toxicidad , Óxido Nítrico/metabolismo , Óxido Nítrico Sintasa de Tipo II/metabolismo , Alcamidas Poliinsaturadas/farmacología , ATPasa Intercambiadora de Sodio-Potasio/metabolismoRESUMEN
Famotidine (FMT) and ibuprofen (IBU) were used as model drugs to obtain coamorphous systems, where the guanidine moiety of the antacid and the carboxylic group of the nonsteroidal anti-inflammatory drug could potentially participate in H-bonds leading to a given structural motif. The systems were prepared in 3:7, 1:1, and 7:3 FMT and IBU molar ratios, respectively. The latter two became amorphous after 180 min of comilling. FMT-IBU (1:1) exhibited a higher physical stability in assays at 4, 25, and 40 °C up to 60 days. Fourier transform infrared spectroscopy accounted for important modifications in the vibrational behavior of those functional groups, allowing us to ascribe the skill of 1:1 FMT-IBU for remaining amorphous to equimolar interactions between both components. Density functional theory calculations followed by quantum theory of atoms in molecules analysis were then conducted to support the presence of the expected FMT-IBU heterodimer with consequent formation of a R228 structural motif. The electron density (ρ) and its Laplacian (∇2ρ) values suggested a high strength of the specific intermolecular interactions. Molecular dynamics simulations to build an amorphous assembly, followed by radial distribution function analysis on the modeled phase were further employed. The results demonstrate that it is a feasible rational design of a coamorphous system, satisfactorily stabilized by molecular-level interactions leading to the expected motif.
Asunto(s)
Antiácidos/química , Antiinflamatorios no Esteroideos/química , Composición de Medicamentos , Famotidina/química , Ibuprofeno/química , Teoría Funcional de la Densidad , Diseño de Fármacos , Enlace de Hidrógeno , Modelos Químicos , Simulación de Dinámica Molecular , Estructura Molecular , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
In this paper, co-grinding mixtures of omeprazole-amoxicillin trihydrate (CGM samples) and omeprazole-anhydrous amoxicillin (CGMa samples) at 3:7, 1:1 and 7:3 molar ratios, respectively, were studied with the aim of obtaining a co-amorphous system and determining the potential intermolecular interactions. These systems were fully characterized by differential scanning calorimetry (DSC), FT-infrared spectroscopy (FTIR), X-ray powder diffraction (PXRD), scanning electron microscopy (SEM) and solid state Nuclear Magnetic Resonance (ssNMR). The co-grinding process was not useful to get a co-amorphous system but it led to obtaining the 1:1 CGMa disordered phase. Moreover, in this system both FTIR and ssNMR analysis strongly suggest intermolecular interactions between the sulfoxide group of omeprazole and the primary amine of amoxicillin anhydrous. The solubility measurements were performed in simulated gastric fluid (SGF) to prove the effect of the co-grinding process. Complementarily, we carried out density functional theory calculations (DFT) followed by quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analyses in order to shed some light on the principles that guide the possible formation of heterodimers at the molecular level, which are supported by spectroscopic experimental findings.
Asunto(s)
Amoxicilina/química , Antibacterianos/química , Omeprazol/química , Inhibidores de la Bomba de Protones/química , Amoxicilina/farmacología , Antibacterianos/farmacología , Interacciones Farmacológicas , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Omeprazol/farmacología , Difracción de Polvo , Inhibidores de la Bomba de Protones/farmacología , Teoría Cuántica , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
The characterization of the inclusion complex between 2-hydroxybenzophenone (2OHBP) and ß-cyclodextrin (ßCD) in the solid state was performed using Fourier transform infrared spectroscopy (FTIR), powder X-ray diffractometry (PXRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). The apparent formation constant of the complex was determined by phase solubility diagrams and liquid chromatography (HPLC) at different temperatures. The formation of the inclusion complex induced slight shifts in the FTIR spectrum while by PXRD a new crystalline phase was observed. TEM studies revealed that the complex forms aggregates of nanometric size. The inclusion complex showed a higher solubility in the tested dissolution media than free 2OHBP. Moreover, the freeze-dried solid complex exhibits a higher thermal stability than the solid free drug. The thermodynamic analysis allowed us to conclude that the encapsulation process is endothermic in water and exothermic in methanol-water.
Asunto(s)
Benzofenonas/química , beta-Ciclodextrinas/química , Rastreo Diferencial de Calorimetría , Cromatografía Líquida de Alta Presión , Entropía , Enlace de Hidrógeno , Metanol/química , Microscopía Electrónica de Transmisión , Modelos Moleculares , Estructura Molecular , Solubilidad , Soluciones , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , Agua/química , Difracción de Rayos XRESUMEN
Famotidine (FMT), a histamine H2 -receptor antagonist, is a drug commonly used in treatments of gastroesophageal diseases that presents solid-state polymorphism (A and B forms), the marketed form being the metastable polymorph B. A new stable salt was obtained by combination of FMT and maleic acid as coformer. FMT maleate (FMT-MLT) was prepared either by solvent evaporation or comilling methods. Single-crystal X-ray diffraction reveals that (FMT)(+) in FMT-MLT adopts an extended conformation that is stabilized by classical and nonclassical H-bonds. The three-dimensional packing consists of tapes along the axis b that further develop a columnar array based on H-bonds involving (FMT)(+) side chain. Nonconventional π-stacking interactions between adjacent tapes were also identified. Fourier transform infrared, differential scanning calorimetry, thermogravimetric analysis, polarized light thermal microscopy, and scanning electron microscopy were employed to characterize the multicomponent complex. According to the solubility values in water and simulated gastric fluid, FMT-MLT exhibits such a performance that improves on the solubility of the commercially available polymorph. Finally, the higher stability of FMT-MLT regarding both FMT forms, as well as its easy preparation from either A or B forms or a mixture of them, also allows to consider this salt as a valuable alternative to avoid the polymorphism issue in marketed formulations containing FMT.