RESUMEN

This work aimed to assess the synergistic antibacterial effects of thyme and oregano essential oils in various ratios (thyme:oregano; 10:0, 8:2, 6:4, 4:6, 2:8, 10:0). We hypothesized that the synergistic combination of thyme and oregano essential oils can be effectively incorporated into sericin/pectin film to enhance its functional properties. Among the combinations tested, the mixture of thyme/oregano essential oil (TOE) at an 8:2 ratio exhibited the most potent synergistic activity against P. aeruginosa and S. aureus, with fractional inhibitory concentration index (FICindex) of 0.9. In this combination, thymol constituting 51.83 % of TOE (8:2), was the predominant component. TOE at an 8:2 ratio was selected to incorporate into sericin/pectin film. Different concentrations of TOE (0.8 %, 1.2 % and 1.6 %) were applied to evaluate their impact on film properties compared to a film without essential oil (control). It was found that increasing TOE concentration (control; 0 %) to 1.6 % reduced film moisture content (from 21.53 % to 16.91 %), decreased yellowness (from 18.24 to 15.92), diminished gloss (from 63.79 to 11.18), lowered swelling index (from 1.24 to 0.98), and reduced tensile strength (from 9.70 to 4.14 MPa). However, the addition of TOE showed higher film total phenolic content (8.59-31.53 mg gallic acid/g dry sample) and increased antioxidant activity (0.99-3.68 µmol Trolox /g dry sample). Moreover, the film with 1.2 % and 1.6 % of thyme/oregano essential oil exhibited inhibitory effects against all tested bacteria. Therefore, the thyme/oregano essential oil combination can provide the desirable physicochemical properties of the sericin/pectin film, as well as its antibacterial and antioxidant activities, making it a promising alternative for food packaging material applications.

Asunto(s)

RESUMEN

BACKGROUND: Aminolevulinic acid-photodynamic therapy (ALA-PDT) is gaining attention as a potential method for treating select cancers due to its high specificity and low side effect feature. ALA enters cancer cells and accumulate as protoporphyrin IX (PpIX), which will then trigger phototoxicity following light irradiation. However, it is reported that some cancer cells have reduced efficacy of ALA-PDT due to high expression of ABCG2, a transporter involved in the PpIX efflux. In this study, we evaluated the effect of mangostin, a natural compound containing anti-tumor property, on the efficacy of ALA-PDT against cancer and the mechanism involved. METHODS: We utilized TMK1 gastric cancer cell line, which has high ABCG2 expression, to evaluate the PpIX accumulation and phototoxicity exerted by ALA and mangostin co-addition. RESULTS: We found that co-addition of ALA and mangostin significantly increase the phototoxicity and PpIX accumulation in TMK1 cells. We also investigated the effect of mangostin on porphyrin-heme pathway enzymes and ABCG2 and found that the addition of mangostin reduce the activity of ABCG2, reducing PpIX efflux. CONCLUSION: These findings suggest that mangostin enhances the efficacy of ALA-PDT in cancer through inhibition of ABCG2 activity.

Asunto(s)

RESUMEN

In this study, nanocomposite film was fabricated using cellulose nanocrystals (CNCs) as nanofiller in a polymer matrix of polyvinyl alcohol (PVA) and gum tragacanth (GT) via solution casting. CNCs were extracted from sugarcane bagasse using a steam explosion technique followed by acid hydrolysis. Initial analysis of CNCs by transmission electron microscopy (TEM) showed nanosized particles of 104 nm in length and 7 nm in width. Physical and chemical characteristics of neat PVA, PVA/GT, and PVA/GT/CNC films with varying concentrations of CNCs (from 2% to 10%) were analyzed by the scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrometry, mechanical test, and swelling test. The SEM analysis showed cluster formation of CNCs in the polymer matrix at high concentration. The developed films were transparent. FTIR spectrometry analysis confirmed the chemical functional groups of the various components in the film. The presence of GT and CNCs in the polymer matrix improved the characteristics of films as evident in the prolonged stability for 7 days and increased mechanical properties. The highest elastic modulus of 1526.11 ± 31.86 MPa and tensile strength of 80.39 MPa were recorded in PVA/GT/CNC2 film. The swelling ability, however, decreased from 260% to 230%. Cytotoxicity analysis of the PVA/GT/CNC film showed that it is nontoxic to mouse fibroblast cells L929 with 95% cell viability. Films loaded with betel leaf extract exhibited excellent antibacterial activities against Staphylococcus aureus DMST 8840 and Pseudomonas aeruginosa TISTR 781 with 28.20 ± 0.84 mm and 23.60 ± 0.55 mm inhibition zones, respectively. These results demonstrate that PVA/GT/CNC loaded with the betel leaf extract could act as promising and versatile wound dressings to protect the wound surface from infection and dehydration.

RESUMEN

This study extracted ellagitannins from rambutan peel using the Soxhlet technique. The extract was further partitioned and fractionated to get extract rich in ellagitannin and geraniin, respectively. The partitioning of the extract significantly increased total phenolic content (TPC) by 36.3% and its biological properties. Mineral elements such as Ca, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, and Zn were identified in both peel and extract. Ellagitannins such as geraniin and corilagin with metabolites (gallic acid and ellagic acid) were identified as the major compounds. Analysis of antioxidant activities shows that the ellagitannin rich extract is as powerful as vitamin C. Geraniin was the main contributor to the free radical scavenging activity. The study also revealed that extract with a fraction rich in geraniin has antioxidant activity equivalent to commercial geraniin (1.56 ± 0.11 Trolox equivalent g/g). It also showed low cytotoxicity on fibroblast L929 cells, moderate tyrosinase activity, and good efficacy against Staphylococcus aureus, Staphylococcus epidermidis, and Cutibacterium acnes strains. Successive fractionation of the extract is a promising technique to produce geraniin rich fractions with enhanced antioxidant property. Rambutan peel, as a natural product, is a good source of mineral elements and biologically active compounds for pharmaceutical, nutraceutical, and cosmetic formulations.

RESUMEN

This study investigated the effect of ultrasound-assisted hydrogen peroxide (H2O2) pretreatment on sugar cane bagasse (SCB) followed by Monascus purpureus TISTR 3003 cultivation for lovastatin production under solid-state fermentation (SSF). Optimization of the pretreatment conditions was investigated using a response surface methodology (RSM). Within the range of the selected operating conditions, the optimized values of H2O2 concentration, amplitude, SCB dosage, and sonication time were found to be 2.74%, 83.22 µm, 2.84% and 52.29 min, respectively. The R 2 value of 0.9749 indicated that the fitted model is in good agreement with the predicted and actual lovastatin production. On the basis of the optimum conditions, the lovastatin production was 2347.10 ± 17.19 µg/g, which is 2.4 times higher than that under untreated conditions. Scanning electron microscopy (SEM) analysis explored the surface structure of the untreated SCB, which showed a compact rigid structure. In contrast, treated SCB had a rough surface structure and cracks as a result of the pretreatment.

RESUMEN

In this study, we report the inhibition of Kluyveromyces marxianus TISTR5925 growth and ethanol fermentation in the presence of furan derivatives and weak acids (acetic acid and lactic acid) at high temperatures. Cassava pulp, obtained as the waste from starch processing, was collected from 14 starch factories located in several provinces of Thailand. At a high temperature (42 °C), the cassava pulp hydrolysate from some starch factories strongly inhibited growth and ethanol production of both K. marxianus (strain TISTR5925) and Saccharomyces cerevisiae (strain K3). HPLC detected high levels of lactic acid and acetic acid in the hydrolysates, suggesting that these weak acids impaired the growth of K. marxianus at high temperature. We isolated Trp-requiring mutants that had reduced tolerance to acetic acid compared to the wild-type. This sensitivity to acetic acid was suppressed by supplementation of the medium with tryptophan.

Asunto(s)

RESUMEN

In order to develop a method for producing fuel ethanol from cassava pulp using cell surface engineering (arming) technology, an arming yeast co-displaying α-amylase (α-AM), glucoamylase, endoglucanase, cellobiohydrase, and ß-glucosidase on the surface of the yeast cells was constructed. The novel yeast strain, possessing the activities of all enzymes, was able to produce ethanol directly from soluble starch, barley ß-glucan, and acid-treated Avicel. Cassava is a major crop in Southeast Asia and used mainly for starch production. In the starch manufacturing process, large amounts of solid wastes, called cassava pulp, are produced. The major components of cassava pulp are starch (approximately 60%) and cellulose fiber (approximately 30%). We attempted simultaneous saccharification and ethanol fermentation of cassava pulp with this arming yeast. During fermentation, ethanol concentration increased as the starch and cellulose fiber substrates contained in the cassava pulp decreased. The results clearly showed that the arming yeast was able to produce ethanol directly from cassava pulp without addition of any hydrolytic enzymes.

Asunto(s)