RESUMEN

INTRODUCTION: Mandibular advancement surgery corrects bone bases while establishing patients' functional and aesthetic rehabilitation. However, little is known about the results of this procedure in the structures that make up the stomatognathic system, as the condyles. OBJECTIVE: This study aimed to evaluate the structural and positional changes of mandibular condyles in ortho-surgical patients who underwent mandibular advancement surgery. MATERIAL AND METHODS: A prospective investigation was conducted with cone-beam computed tomography images. Using Dolphin Imaging® software, seven ortho-surgical patients with Angle Class II malocclusion and mandibular deficiency were evaluated. The images assessed were obtained at pre-surgical phase and after, at least, 1 year of the procedure. To study the structural and positional changes of condyles, linear and angular measurements were obtained, and the right and left sides of patients were compared. Descriptive statistical analysis was performed and, in order to verify possible significant differences, normality tests (Kolmogorov-Smirnov) were applied, followed by a paired t-test to define significance. RESULTS: For all measures evaluated in this study, no statistically significant differences were found. CONCLUSION: The ortho-surgical procedure performed did not change the structure and position of the condyles of patients who underwent surgical mandibular advancement. Right and left mandibular condyles behaved similarly, suggesting stability and condylar adaptation after surgery.

Asunto(s)

RESUMEN

ABSTRACT Introduction: Mandibular advancement surgery corrects bone bases while establishing patients' functional and aesthetic rehabilitation. However, little is known about the results of this procedure in the structures that make up the stomatognathic system, as the condyles. Objective: This study aimed to evaluate the structural and positional changes of mandibular condyles in ortho-surgical patients who underwent mandibular advancement surgery. Material and Methods: A prospective investigation was conducted with cone-beam computed tomography images. Using Dolphin Imaging® software, seven ortho-surgical patients with Angle Class II malocclusion and mandibular deficiency were evaluated. The images assessed were obtained at pre-surgical phase and after, at least, 1 year of the procedure. To study the structural and positional changes of condyles, linear and angular measurements were obtained, and the right and left sides of patients were compared. Descriptive statistical analysis was performed and, in order to verify possible significant differences, normality tests (Kolmogorov-Smirnov) were applied, followed by a paired t-test to define significance. Results: For all measures evaluated in this study, no statistically significant differences were found. Conclusion: The ortho-surgical procedure performed did not change the structure and position of the condyles of patients who underwent surgical mandibular advancement. Right and left mandibular condyles behaved similarly, suggesting stability and condylar adaptation after surgery.

RESUMO Introdução: A cirurgia de avanço mandibular corrige as bases ósseas e estabelece a reabilitação funcional e estética dos pacientes. Entretanto, pouco se sabe sobre os resultados desse procedimento nas estruturas que compõem o sistema estomatognático, como os côndilos. Objetivo: Este estudo teve como objetivo avaliar as alterações estruturais e posicionais dos côndilos mandibulares em pacientes ortodôntico-cirúrgicos submetidos à cirurgia de avanço mandibular. Material e Métodos: Foi realizada investigação prospectiva com imagens de tomografia computadorizada de feixe cônico. Utilizando o software Dolphin Imaging®, foram avaliados sete pacientes ortodôntico-cirúrgicos com má oclusão Classe II de Angle e deficiência mandibular. Foram avaliadas imagens da fase pré-cirúrgica e de, no mínimo, um ano após o procedimento. Para estudar as alterações estruturais e posicionais dos côndilos, foram obtidas medidas lineares e angulares e comparados os lados direito e esquerdo dos pacientes. Foi realizada análise estatística descritiva e, para verificar possíveis diferenças significativas, foram aplicados testes de normalidade (Kolmogorov-Smirnov), seguido de teste t pareado, para definição de significância. Resultados: Para nenhuma das medidas avaliadas nesse estudo foram encontradas diferenças estatisticamente significativas. Conclusão: O procedimento ortodôntico-cirúrgico realizado não alterou a estrutura e a posição dos côndilos dos pacientes submetidos à cirurgia de avanço mandibular. Os côndilos mandibulares direito e esquerdo comportaram-se de forma semelhante, sugerindo estabilidade e adaptação condilar após a cirurgia.

RESUMEN

INTRODUCTION: The aim of this cross-sectional study was to investigate maxillomandibular morphology in hyperdivergent and hypodivergent individuals, using 3D surface models generated by cone-beam computed tomography (CBCT). METHODS: The sample consisted of 60 CBCTs (30 males, 30 females) patients aged 12-30 years, divided into two groups comprising hyperdivergent (≥35°) and hypodivergent (≤30°) individuals, according to the mandibular plane (MP) angle. Multiplanar reconstructions were used to mark the landmarks, and 3D surface models were created to evaluate structures of the maxillomandibular complex, including condyle, ramus, symphysis and palatal height. Intergroup comparisons were performed by independent t-test. Pearson's correlation test was used (P < .05) to evaluate the correlation of the MP angle with the angles and linear measurements of other structures. RESULTS: Significant differences were found between the groups regarding condylar width, ramus height, condylar plus ramus height, mandibular length, gonial angle, palatal plane angle and palatal-mandibular angle. No differences (P > .05) were found for the condylar height, symphysis inclination angle or palatal height. Correlations (P < .05) were found between the MP angle and structures of the maxillomandibular complex. CONCLUSIONS: Hyperdivergent (MP ≥ 35°) and hypodivergent (MP ≤ 30°) individuals present different skeletal morphology regarding condylar width, ramus height, condylar plus ramus height, mandibular length, gonial angle, palatal plane angle and palatal-mandibular angle. There is a significant correlation between MP angle and morphological structures such as condyle, ramus, symphysis, palatal plane angle and palatal-mandibular angle.

Asunto(s)

RESUMEN

INTRODUCTION: Titanium tetrafluoride (TiF4) is a fluoride compound that, when is applied over enamel, promotes a protection against demineralization through a titanium dioxide (TiO2) acid-resistant coat. OBJECTIVES: This study sought to verify the hypothesis that a single application of 4% TiF4 increases the resistance of enamel to dental demineralization in orthodontic patients. MATERIALS AND METHODS: This controlled clinical trial followed CONSORT guidelines and investigated the prevention of enamel demineralization, fluoride retention, and the presence of a Ti layer after TiF4 application on banded teeth exposed to clinical cariogenic biofilm. Forty premolars were divided into a control group (CG; n = 20) and a test group (TG; n = 20). Teeth from both groups received prophylaxis and orthodontic bands with a cariogenic locus. In the TG, all teeth additionally underwent aqueous 4% TiF4 solution application after prophylaxis before being banded. After one month, teeth from both groups were extracted and prepared to assess the microhardness, fluoride retention, and evaluation of the Ti coating over the enamel surface. All data were analyzed with a paired Student's t-test (p<0.05). RESULTS: Enamel microhardness and fluoride uptake were higher in TG than in CG, while the Ti layer could be seen over TG teeth that received TiF4 application. CONCLUSION: Under clinical circumstances, the 4% aqueous TiF4 solution was effective in preventing enamel mineral loss through increasing the enamel resistance to dental demineralization, enhancing its microhardness and fluoride uptake, and forming a Ti coat.

Asunto(s)

RESUMEN

INTRODUCTION: This study evaluated mandibular morphology and transverse dental compensation between symmetrical and asymmetrical subjects, allocated according to sagittal skeletal patterns. In addition, the hypothesis that mandibular morphology and dental compensations differed between symmetrical/asymmetrical groups and also among the different types of sagittal skeletal patterns was tested. METHODS: Cone-beam computed tomography images of 96 patients were included in this study and were divided into 2 groups according to the degree of menton deviation: a symmetrical group with deviation up to 2.0 mm (n = 48; mean age, 15 ± 6 years), and an asymmetrical group with deviation from 3.5 mm (n = 48; mean age, 16 ± 8 years). The 2 groups were divided in accordance with the ANB angle: Class I, II, and III. Skeletal and dental measurements were performed. Intergroup and intragroup analyses were carried out, using a 2-way analysis of variance to assess the interaction of factors: symmetry and sagittal skeletal pattern; and the Student t test for differences between deviated (Dv) and nondeviated (NDv) sides. RESULTS: Symmetrical/asymmetrical groups and Class I, II, and III groups were similar in relation to demographic aspects (P = 0.412 and P = 0.357 for sex and age, respectively). Asymmetrical patients had higher values for body length and mandibular ramus and condyle height on the NDv side (P = 0.011, P = 0.024, and P = 0.001, respectively). When comparing the different skeletal patterns, patients with a Class III relationship demonstrated higher values for mandibular ramus height. Intergroup analysis showed no differences in dental parameters. In the comparison between the sides, the asymmetrical group showed a significant difference in canine inclination (P = 0.008), mandibular ramus height (P = 0.004), condyle height (P = 0.010) and gonion to midsagittal plane distance (P = 0.018). CONCLUSIONS: Asymmetrical subjects showed higher values for canine inclination and mandibular body, ramus and condylar height on the NDv side. The hypothesis was partially confirmed that mandibular morphology and dental compensations are different between symmetrical/asymmetrical groups and among different sagittal skeletal patterns.

Asunto(s)

RESUMEN

ABSTRACT Introduction: Titanium tetrafluoride (TiF4) is a fluoride compound that, when is applied over enamel, promotes a protection against demineralization through a titanium dioxide (TiO2) acid-resistant coat. Objectives: This study sought to verify the hypothesis that a single application of 4% TiF4 increases the resistance of enamel to dental demineralization in orthodontic patients. Materials and Methods: This controlled clinical trial followed CONSORT guidelines and investigated the prevention of enamel demineralization, fluoride retention, and the presence of a Ti layer after TiF4 application on banded teeth exposed to clinical cariogenic biofilm. Forty premolars were divided into a control group (CG; n = 20) and a test group (TG; n = 20). Teeth from both groups received prophylaxis and orthodontic bands with a cariogenic locus. In the TG, all teeth additionally underwent aqueous 4% TiF4 solution application after prophylaxis before being banded. After one month, teeth from both groups were extracted and prepared to assess the microhardness, fluoride retention, and evaluation of the Ti coating over the enamel surface. All data were analyzed with a paired Student's t-test (p<0.05). Results: Enamel microhardness and fluoride uptake were higher in TG than in CG, while the Ti layer could be seen over TG teeth that received TiF4 application. Conclusion: Under clinical circumstances, the 4% aqueous TiF4 solution was effective in preventing enamel mineral loss through increasing the enamel resistance to dental demineralization, enhancing its microhardness and fluoride uptake, and forming a Ti coat.

RESUMO Introdução: O tetrafluoreto de titânio (TiF4) é um composto fluoretado que, quando aplicado sobre o esmalte dentário, promove uma proteção contra desmineralização, por meio da formação de uma camada ácido-resistente de dióxido de titânio (TiO2). Objetivos: O presente estudo buscou verificar a hipótese de que uma única aplicação de TiF4 a 4% aumenta a resistência do esmalte dentário à desmineralização, em pacientes ortodônticos. Material e Métodos: Esse ensaio clínico controlado seguiu as diretrizes do CONSORT e investigou a prevenção da desmineralização do esmalte, retenção de flúor e a presença de uma camada de titânio após a aplicação do TiF4 em dentes bandados expostos ao biofilme cariogênico clínico. Quarenta pré-molares foram divididos em dois grupos: controle (GC; n = 20) e teste (GT; n = 20). Dentes de ambos os grupos receberam profilaxia e bandas ortodônticas com nicho cariogênico. No GT, todos os dentes também foram submetidos a aplicação de solução aquosa de TiF4 4 após profilaxia, antes de serem bandados. Após um mês, os dentes de ambos os grupos foram extraídos e preparados para avaliar a microdureza, retenção de flúor e avaliação da camada de titânio sobre a superfície do esmalte. Todos os dados foram analisados pelo teste t pareado (p<0,05). Resultados: A microdureza do esmalte e a absorção de flúor foram mais elevadas no GT do que no GC, enquanto uma camada de titânio pôde ser observada sobre os dentes do GT, que receberam aplicação TiF4. Conclusão: Em circunstâncias clínicas, a solução de TiF4 a 4% foi eficaz na prevenção da perda mineral do esmalte, por meio do aumento da resistência à desmineralização dentária, aumentando sua microdureza e absorção de flúor, e formando uma camada protetora de titânio.

RESUMEN

INTRODUCTION: In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME). DESCRIPTION: Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area. RESULTS: The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C. CONCLUSIONS: Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.

Asunto(s)

RESUMEN

PURPOSE: This study was performed to investigate mandibular canal displacement in patients with ameloblastoma using a 3-dimensional mirrored-model analysis. MATERIALS AND METHODS: The sample consisted of computed tomographic scans of patients with ameloblastoma (n=10) and healthy controls (n=20). The amount of mandibular canal asymmetry was recorded as a continuous variable, while the buccolingual (yaw) and supero-inferior (pitch) directions of displacement were classified as categorical variables. The t-test for independent samples and the Fisher exact test were used to compare groups in terms of differences between sides and the presence of asymmetric inclinations, respectively (P<0.05). RESULTS: The length of the mandibular canal was similar on both sides in both groups. The ameloblastoma group presented more lateral (2.40±4.16 mm) and inferior (-1.97±1.92 mm) positions of the mental foramen, and a more buccal (1.09±2.75 mm) position of the middle canal point on the lesion side. Displacement of the mandibular canal tended to be found in the anterior region in patients with ameloblastoma, occurring toward the buccal and inferior directions in 60% and 70% of ameloblastoma patients, respectively. CONCLUSION: Mandibular canal displacement due to ameloblastoma could be detected by this superimposed mirrored method, and displacement was more prevalent toward the inferior and buccal directions. This displacement affected the mental foramen position, but did not lead to a change in the length of the mandibular canal. The control group presented no mandibular canal displacement.

Asunto(s)

RESUMEN

OBJECTIVE: To assess scientific evidence of the association between temporomandibular joint (TMJ) disorders and facial asymmetry (FA). METHODS: A systematic review was performed in accordance with the PRISMA checklist. A search strategy was developed in electronic databases including MEDLINE, Scopus, Web of Science, Virtual Health Library and Cochrane Library until January 2020. Eligibility criteria included observational studies that investigated the occurrence of FA among patients with and without signs and symptoms of TMJ disorders. Risk of bias of individual studies was analysed after study selection and data collection processes according to Fowkes and Fulton guidelines. Four meta-analyses (MA) were performed to evaluate the association between TMJ disorders and linear/angular menton deviation, subgrouping the studies into unilateral and bilateral cases. The evidence was certainty-tested using the GRADE approach. RESULTS: The search retrieved 2371 studies, 31 of which were eligible for full-text reading. Seven cross-sectional clinical studies met the eligibility criteria and were included in the qualitative synthesis, comprising a total of 621 subjects (345 with TMJ disease and 276 in control group), four of which were classified as being methodologically sound. Five studies were eligible for quantitative synthesis. Linear and angular menton deviation was greater in individuals with unilateral TMJ disorders than controls (MD = 2.41 [0.33, 4.50] P = .02; I2  = 86% and MD = 2.68 [0.99, 4.38] P = .002; I2  = 0%, respectively). CONCLUSIONS: Despite the low certainty in evidence, the present study indicated that unilateral TMJ disorders are associated with FA. However, longitudinal studies with greater certainty of evidence should be conducted to achieve a stronger estimate of this association.

Asunto(s)

RESUMEN

ABSTRACT Introduction: In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME). Description: Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area. Results: The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C. Conclusions: Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.

RESUMO Introdução: Em Ortodontia e Ortopedia Facial, o momento de início do tratamento pode ser crítico, e uma análise individual deve ser aplicada para promover um planejamento de tratamento favorável. No presente estudo, foram realizadas a avaliação individualizada da sutura palatina mediana (SPM) e medições no palato de adolescentes e adultos jovens tratados com expansão rápida da maxila (ERM). Descrição: Foram avaliados vinte e seis pacientes submetidos à ERM com aparelho dentossuportado (Hyrax). Os critérios de inclusão foram: idade mínima de 14 anos, apresentando todos os dentes posteriores, diagnosticado com discrepância transversa da maxila e com uma indicação clínica para expansão maxilar. A tomografia computadorizada de feixe cônico (TCFC) pré-tratamento desses pacientes foi avaliada para obter os estágios de maturação da SPM (MSPM), densidade da SPM (DSPM), comprimento do palato, espessura (anterior, intermediária e posterior) e área sagital. Resultados: Os estágios de maturação presentes foram C, D ou E; a densidade variou de 0,6 a 1, e foram determinados grupos de baixa (DSPM < 0,75) e alta densidade (DSPM ≥ 0,75). Indivíduos com maior DSPM apresentaram menor área sagital, em comparação com o grupo de densidade mais baixa. Indivíduos nos estágios D e E de MSPM apresentaram menor área sagital e espessura intermediária, comparados aos indivíduos no estágio C. Conclusão: Uma menor área sagital palatina foi observada nos grupos de alta DSPM e nos estágios D e E de MSPM.

Asunto(s)

RESUMEN

OBJECTIVE: The aim of this study was to evaluate craniofacial asymmetry in children with transverse maxillary deficiency, with or without functional unilateral posterior crossbite (UPC), before and after rapid maxillary expansion (RME). SETTING AND SAMPLE POPULATION: A sample of 51 children with cone beam computed tomography scans obtained before RME (T1) and a year after RME (T2). MATERIAL AND METHODS: This prospective study consisted of 2 groups: 25 children with functional UPC (6.77 ± 1.5 years) and 26 children without UPC (7.41 ± 1.31 years). Linear and angular measurements were obtained from zygomatic, maxilla, glenoid fossa and mandible, using original and mirrored 3D overlapped models. All right and left side comparisons in both groups and intergroups asymmetries were compared using MANOVA and t test for independent samples, respectively, statistically significant at P < .05. RESULTS: The UPC group showed no side differences, but mandibular horizontal rotation at T1, and this asymmetry was improved in T2. The non-UPC group showed at baseline significant lateral asymmetry in orbitale, position of palatine foramen, respectively, in average 2.95 mm and 1.16 mm, and 0.49 mm of average asymmetry in condylar height. The glenoid fossa was symmetric in both groups at T1 and T2. CONCLUSIONS: Children with transverse maxillary deficiency showed slight morphological asymmetry, located in the mandible position in cases of UPC, and in the orbital and maxillary regions in cases without UPC. One year after RME, patients improved their craniofacial asymmetry, with significant changes in the mandible and correction of the mandibular rotation in patients who presented UPC.

Asunto(s)

RESUMEN

OBJECTIVES: To perform a three-dimensional evaluation of the position of the condyles in patients treated with Herbst appliance (HA) in two stages of cervical vertebral maturation. SETTING AND SAMPLE POPULATION: Retrospective case-control study. Pubertal Herbst group (PHG; n = 24, mean age 14.5 years, CS 3 and CS 4) and pre-pubertal Herbst group (PPHG; n = 17, mean age 9.9 years, CS 1 and CS 2) were contrasted with comparison groups of non-orthopaedically treated Class II patients in pubertal (PCG; n = 17, mean age 13.9 years) and pre-pubertal maturational stages (PPCG; n = 18, mean age 10.6 years). MATERIALS AND METHODS: Cone-beam computer tomography scans were taken before treatment (T0) and at T1 after 8 to 12 months. Point-to-point measurements of the displacement of the condyles between T0 and T1, relative to the glenoid fossae, were performed in the X, Y, Z and 3D perspectives. Qualitative assessments using semi-transparent overlays and colour mapping also were produced. RESULTS: The displacement of the condyles within the glenoid fossae in the treated groups was small (<0.75 mm; P > .05). Relative to the glenoid fossa, condylar position at T1 was similar to T0 in pre-pubertal and pubertal groups (P > .05). Similar condylar rotations from T0 to T1 were observed in Herbst and comparison groups, and no significant difference was found between pre-pubertal and pubertal patients. CONCLUSIONS: Regardless the stage of skeletal maturation, HA treatment did not change the condyle-glenoid fossa relationship.

Asunto(s)

RESUMEN

Este estudo objetivou avaliar o poder branqueador de diferentes dentifrícios branqueadores. Sessenta e quatro blocos de dentes bovinos (7x7 mm) foram distribuídos aleatoriamente em 8 grupos, estruturados conforme os diferentes dentifrícios clareadores utilizados: G1 (Controle): Colgate Total 12; G2: Sorriso Xtreme White; G3: Oral B 3D White Brilliant Fresh; G4: Oral B 3D White Perfection; G5: Colgate Whitening; G6: Sensodyne Branqueador Extra Fresh; G7: Closeup Extra Whitening e G8: Colgate Luminous White. Inicialmente, os espécimes foram corados por vinho tinto durante 24 horas. Na sequência, mensurou-se a cor desses com espectrofotômetro (Easyshade Compact DEASYC220; VITA, Bad Sackingen, Alemanha). Seguiu-se, então, a escovação dos corpos de prova seis vezes ao dia por um período de 14 dias, totalizando 84 ciclos. A mensuração da cor foi novamente aferida após 42 e 84 ciclos. Os resultados foram submetidos à análise de variância (ANOVA), teste de Friedman para comparações intragrupos e teste Kruskal-Wallis para comparações intergrupos (α = 0,05). Observou-se aumento do valor de L em todos os grupos, retomando aos valores da baseline, com exceção dos Grupos 4 e 5. Quanto ao valor de a*, foi verificado que todos os grupos reduziram, retomando aos valores da baseline, com exceção do Grupo 4, que ficou estatisticamente menor. Em referência ao valor de b*, foi constatado que todos os grupos reduziram, ficando inferiores aos valores da baseline e que o Grupo 8 obteve uma redução ainda maior após 84 ciclos de escovação. Os dentifrícios clareadores Sorriso Xtreme White, Closeup Extra Whitening e Colgate Luminous White apresentaram melhores resultados no branqueamento dentário (AU)

This study aimed to evaluate the whitening power of different tooth whitening products. Sixty four blocks of bovine teeth (7x7 mm) were randomly distributed in 8 groups, structured according to the different whitening dentifrices used: G1 (Control): Colgate Total 12; G2: Sorriso Xtreme White; G3: Oral B 3D White Brilliant Fresh; G4: Oral B 3D White Perfection; G5: Colgate Whitening; G6: Sensodyne Branqueador Extra Fresh; G7: Closeup Extra Whitening; and G8: Colgate Luminous White. Initially, the specimens were stained with red wine for 24 hours. The color was then measured with a spectrophotometer (Easyshade Compact DEASYC220; VITA, Bad Sackingen, Germany). The brushing of the specimens was carried out six times a day for a period of 14 days, totaling 84 cycles. Color measurement was again measured after 42 and 84 cycles. The results were submitted to analysis of variance (ANOVA), Friedman test for intragroup comparisons and Kruskal-Wallis test for intergroup comparisons (p; = 0.05). We observed an increase in the L value in all groups, returning to the baseline values, with exception of Groups 4 and 5. As for the value of a*, we verified that it was reduced in all groups, returning to baseline values, with exception of Group 4, which was statistically lower. Regarding the value of b*, we observed that it was reduced in all groups, being lower than baseline values, and that Group 8 obtained an even greater reduction after 84 brushing cycles. Whitening toothpastes Sorriso Xtreme White, Closeup Extra Whitening, and Colgate Luminous White showed better results for tooth whitening (AU).

Asunto(s)

RESUMEN

O presente estudo teve o objetivo de avaliar a influência do uso clínico na rugosidade de fios ortodônticos estéticos revestidos parcial ou totalmente por teflon. Para tal, fios 0,016" das marcas TP (La Porte, EUA) e Ortho Organizers (São Marcos, EUA) foram divididos em 4 grupos: grupo 1-TP original (controle), grupo 2-TP após o uso clínico, grupo 3- Ortho Organizers original (controle), grupo 4- Ortho Organizers após o uso clínico. Os fios foram utilizados aleatoriamente por 30 dias em 12 pacientes submetidos a tratamento ortodôntico, suas superfícies avaliadas por meio de microscópio eletrônico de varredura (MEV) e a rugosidade através do ensaio de perfilometria 3D (Zygo Newview 7100), no qual foram avaliados 4 parâmetros (R3z, Ra, rms ou Rq e Pv). Diferenças entre fios, controle e pós uso foram determinadas por meio do teste T para amostras relacionadas, com nível de significância de 5% (p<0,05). Os fios originais apresentaram falhas e falta de padronização na aplicação do revestimento. Verificou-se que com o uso clínico houve a formação de depressões, crateras e exposição da porção metálica do fio em algumas regiões. A perfilometria evidenciou o aumento significativo na maioria dos parâmetros de rugosidade (R3z, rms, Pv), exceto o Ra que não apresentou diferença estatística. Pode-se concluir que após o uso clínico os fios estéticos apresentaram perda do revestimento e um aumento na rugosidade da superfície.(au)

Abstract The aim of this study was to evaluate the influence of clinical use on the roughness of aesthetic orthodontic wires partially or totally coated with teflon. 0.016 "wires from TP (La Porte, USA) and Ortho Organizers (San Marcos, USA) were divided into 4 groups: group 1-TP original (control), group 2-TP after clinical use, group 3- Ortho Organizers original (control), group 4- Ortho Organizers after clinical use. The wires were used for 30 days in 12 patients submitted to orthodontic treatment, their surfaces evaluated by scanning electron microscope (SEM) and roughness through the 3D profilometry test (Zygo Newview 7100), in which 4 parameters were evaluated (R3z, Ra, rms or Rq and Pv). Differences between wires, control and post-use were determined using the T-test for related samples, with a significance level of 5% (p <0.05). The original wires presented failures and lack of standardization in the coating application. It was verified in the SEM that, with the clinical use, there was the formation of depressions, craters and exposure of the wire metallic portion in some regions. The profilometry showed a significant increase in most of the roughness parameters (R3z, rms, Pv), except the Ra that did not present statistical difference. It was concluded that after clinical use, the aesthetic wires showed loss of part of the coating and an increase in surface roughness. (au)

Asunto(s)

RESUMEN

Introduction: In the pediatric dental clinic the impacted teeth can be observedeventually, which can lead to the development of occlusion disorders. Objective:This study aimed to report a clinical case in which the surgical technique ofulectomy was used in conjunction with orthodontic treatment to aid the eruptionof a maxillary central incisor. Case Report: Male patient, 13 years old, Angle ClassI in the mixed dentition stage, with the tooth 21 impacted and reduced space forits eruption due to the migration of adjacent teeth. Fixed appliance was mountedwith Edgewise brackets using 0.20" stainless steel archwire with tight omega andactive spring between teeth 11 and 22 to recover the space of 21, but the passiveeruption was not observed. A fibrous gingival tissue was found, which by palpationrevealed the incisal edge of the tooth 21. The patient was referred to a pediatricdental clinic for a ulectomy. The minimally invasive surgical procedure consistedof the excision of the gingival tissue that covered the crown of the tooth 21 allowingits eruption in the dental arch. After the surgery, the teeth erupted and correctiveorthodontic treatment continued. Conclusion: The ulectomy technique associatedwith orthodontic treatment allowed to reestablish conditions for the developmentof dentition with satisfactory aesthetic and functional characteristics.

Introdução: Eventualmente na clínica odontológica, pode ser observada aimpacção de dentes, que pode acarretar transtornos para o desenvolvimento daoclusão. Objetivo: Objetivou-se relatar um caso clínico no qual a técnica cirúrgicade ulectomia foi utilizada, associada ao tratamento ortodôntico para auxiliar aerupção dentária de um incisivo central superior. Relato de Caso: Paciente dosexo masculino, 13 anos de idade, Classe I de Angle na fase de dentição mista, comdente 21 incluso e espaço reduzido para sua erupção em função da migração dosdentes adjacentes. Foi montado aparelho fixo com bráquetes prescrição Edgewise,utilizando arco 0,20" aço inoxidável com ômega justo e mola ativa entre osdentes 11 e 22 para recuperação do espaço do 21, mas não observou-se a erupçãopassiva. Constatou-se presença de tecido gengival fibroso que, ao toque,evidenciava a borda incisal do referido dente. O paciente foi encaminhado paraclínica de Odontopediatria para a realização da ulectomia. O procedimentocirúrgico minimamente invasivo, consistiu na exérese do tecido gengival querevestia a coroa do dente 21 não irrompido, permitindo sua erupção no arcodentário. Após a cirurgia, o dente irrompeu e o tratamento ortodôntico corretivoprosseguiu. Conclusão: A técnica da ulectomia associada ao tratamentoortodôntico permitiu restabelecer condições para desenvolvimento da dentiçãocom características estético-funcionais satisfatórias.

Asunto(s)

RESUMEN

The sustainability of the natural resources of our planet is a topic for worldwide debate. Mankind, during its evolution as a species, has not been greatly concerned about conserving the environment in which we live. Nowadays we are reaping the fruits of this neglect. Climatic changes and storms are good examples of this. We, humans, must re-think our attitudes in order to leave the planet in a healthy state to be used by our descendants. But thinking of orthodontics, what can we do as orthodontists? From this perspective, the authors of the present study aimed, in a clear and objective manner, to present simple and sustainable ways to proceed during our activity as orthodontists, in order to minimize the effects on nature, caused by man.

Asunto(s)

RESUMEN

ABSTRACT The sustainability of the natural resources of our planet is a topic for worldwide debate. Mankind, during its evolution as a species, has not been greatly concerned about conserving the environment in which we live. Nowadays we are reaping the fruits of this neglect. Climatic changes and storms are good examples of this. We, humans, must re-think our attitudes in order to leave the planet in a healthy state to be used by our descendants. But thinking of orthodontics, what can we do as orthodontists? From this perspective, the authors of the present study aimed, in a clear and objective manner, to present simple and sustainable ways to proceed during our activity as orthodontists, in order to minimize the effects on nature, caused by man.

RESUMO A sustentabilidade dos recursos naturais de nosso planeta é tema de debate em todo o mundo. O homem, durante a evolução como espécie, pouco se preocupou em conservar o meio ambiente em que vive. Nos dias de hoje, colhemos os frutos do descaso; mudanças climáticas e tempestades são bons exemplos disso. Nós, seres humanos, devemos repensar nossas atitudes, a fim de deixar o planeta propício para que nossos descendentes possam utilizá-lo. Mas, pensando-se na Ortodontia, o que nós ortodontistas podemos fazer? Nessa perspectiva, os autores do presente estudo se propuseram a apresentar, de forma clara e objetiva, formas simples e sustentáveis para serem utilizadas durante nossa atividade como ortodontistas, a fim de minimizar os efeitos causados pelo homem na natureza.

Asunto(s)

RESUMEN

Os pré-molares são os dentes comumente extraídos com finalidade ortodôntica, e por isso, a extração de outros dentes é denominada como atípica ou não convencional. O objetivo deste artigo é apresentar uma revisão da literatura sobre tratamentos ortodônticos com essas extrações, analisando o diagnóstico e tratamento, com ênfase nas indicações e limitações. Foram discutidos e apresentados pontos relevantes das extrações de incisivos inferiores, molares, caninos e incisivos superiores. Apesar de pouco frequentes, as extrações atípicas são uma alternativa válida para correção de maloclusões. Quando bem indicados e realizados, são tratamentos que podem simplificar a mecânica ortodôntica, reduzir o tempo de tratamento e oferecer menor custo biológico comparado a outras alternativas. Entretanto, concluiu-se que os casos de extrações atípicas apresentam indicações específicas e restritas, não sendo possível estabelecer protocolos de tratamento e cada caso deve ser cuidadosamente planejado.(AU)

The premolars are commonly extracted for orthodontic purposes, and therefore the extraction of any other teeth is denominated as atypical or non-conventional. The objective of this article is to present a literature review of orthodontic treatments with atypical extractions, analyzing diagnosis and treatment and emphasizing indications and limitations. Relevant aspects regarding extractions of lower incisors, molars, canines and upper incisors were discussed. Although being uncommon, atypical extractions are a valid alternative for correcting malocclusions. When well indicated and performed, they can simplify orthodontic mechanics, reduce treatment time, and offer lower biological cost compared to other alternatives. Nevertheless, it may be concluded that cases of atypical extractions present specific and restricted indications and it is not possible to establish treatment protocols as each case must be planned carefully.(AU)

Asunto(s)