RESUMEN

From the control theory, the best control gain produces a balance between the trajectory tracking accuracy and control energy consumption. The random search of the bat algorithm is one alternative to find the best control gain. In this paper, (1) a bat algorithm based control is proposed to decrease the control energy consumption in robots, where a bat algorithm is used to find the best control gain; and (2) a modified bat algorithm based control is proposed to increase the trajectory tracking accuracy in robots, where a modified bat algorithm is used to find the best control gain. The comparison between the two proposed controls and the simplex based control is illustrated for the trajectory tracking accuracy and control energy consumption in two robots.

Asunto(s)

RESUMEN

The Levenberg-Marquardt and Newton are two algorithms that use the Hessian for the artificial neural network learning. In this article, we propose a modified Levenberg-Marquardt algorithm for the artificial neural network learning containing the training and testing stages. The modified Levenberg-Marquardt algorithm is based on the Levenberg-Marquardt and Newton algorithms but with the following two differences to assure the error stability and weights boundedness: 1) there is a singularity point in the learning rates of the Levenberg-Marquardt and Newton algorithms, while there is not a singularity point in the learning rate of the modified Levenberg-Marquardt algorithm and 2) the Levenberg-Marquardt and Newton algorithms have three different learning rates, while the modified Levenberg-Marquardt algorithm only has one learning rate. The error stability and weights boundedness of the modified Levenberg-Marquardt algorithm are assured based on the Lyapunov technique. We compare the artificial neural network learning with the modified Levenberg-Marquardt, Levenberg-Marquardt, Newton, and stable gradient algorithms for the learning of the electric and brain signals data set.

RESUMEN

In order to solve the trajectory tracking task in a wheeled mobile robot (WMR), a dynamic three-level controller is presented in this paper. The controller considers the mechanical structure, actuators, and power stage subsystems. Such a controller is designed as follows: At the high level is a dynamic control for the WMR (differential drive type). At the medium level is a PI current control for the actuators (DC motors). Lastly, at the low level is a differential flatness-based control for the power stage (DC/DC Buck power converters). The feasibility, robustness, and performance in closed-loop of the proposed controller are validated on a DDWMR prototype through Matlab-Simulink, the real-time interface ControlDesk, and a DS1104 board. The obtained results are experimentally assessed with a hierarchical tracking controller, recently reported in literature, that was also designed on the basis of the mechanical structure, actuators, and power stage subsystems. Although both controllers are robust when parametric disturbances are taken into account, the dynamic three-level tracking controller presented in this paper is better than the hierarchical tracking controller reported in literature.

RESUMEN

In this research, a robust feedback linearization technique is studied for nonlinear processes control. The main contributions are described as follows: 1) Theory says that if a linearized controlled process is stable, then nonlinear process states are asymptotically stable, it is not satisfied in applications because some states converge to small values; therefore, a theorem based on Lyapunov theory is proposed to prove that if a linearized controlled process is stable, then nonlinear process states are uniformly stable. 2) Theory says that all the main and crossed states feedbacks should be considered for the nonlinear processes regulation, it makes more difficult to find the controller gains; consequently, only the main states feedbacks are utilized to obtain a satisfactory result in applications. This introduced strategy is applied in a fuel cell and a manipulator.

Asunto(s)

RESUMEN

In this paper, a hybrid controller with observer is introduced for the estimation and rejection of a disturbance. It is based on the combination of the sliding mode technique and the output feedback strategy. It is divided into two designs: (1) the observer and (2) the controller with observer. The observer is selected to reach two objectives: (a) to assure its stability and (b) for the estimation of a disturbance. The controller with observer is selected to reach three objectives: (a) to assure its stability, (b) for the rejection of a disturbance, and (c) for the decreasing of chattering in the sliding mode behavior. The proposed method is applied for the estimation and rejection of the disturbance in a plotter and a suspension system.

RESUMEN

In this paper, the recursive least square algorithm is designed for the big data learning of a feedforward neural network. The proposed method as the combination of the recursive least square and feedforward neural network obtains four advantages over the alone algorithms: it requires less number of regressors, it is fast, it has the learning ability, and it is more compact. Stability, convergence, boundedness of parameters, and local minimum avoidance of the proposed technique are guaranteed. The introduced strategy is applied for the modeling of the crude oil blending process.

Asunto(s)

RESUMEN

In this study, an observer for the states and disturbance estimation in two renewable energy systems is introduced. The restrictions of the gains in the proposed observer are found to guarantee its stability and the convergence of its error; furthermore, these results are utilized to obtain a good estimation. The introduced technique is applied for the states and disturbance estimation in a wind turbine and an electric vehicle. The wind turbine has a rotatory tower to catch the incoming air to be transformed in electricity and the electric vehicle has generators connected with its wheels to catch the vehicle movement to be transformed in electricity.

RESUMEN

The present paper concerns the induction of stable sustained oscillation in feedback-linearizable single-input affine nonlinear dynamical systems via continuous-time state feedback control. The proposed application-oriented control approach is based on the conception of a state feedback controller that ensures the tracking of a limit cycle characterized in terms of the feedback-linearized system. Boundedness and convergence of the closed-loop trajectories are established following the Lyapunov theoretical framework and applying LaSalle׳s stability principle. The proposed approach is demonstrated with computer-simulated control experiments, showing that it ensures the convergence of the state trajectories of the controlled system to a designed limit cycle and that the methodology can, in principle, be applied to any single input feedback linearizable system.

RESUMEN

The trajectory tracking for a class of uncertain nonlinear systems in which the number of possible states is equal to the number of inputs and each input is preceded by an unknown symmetric deadzone is considered. The unknown dynamics is identified by means of a continuous time recurrent neural network in which the control singularity is conveniently avoided by guaranteeing the invertibility of the coupling matrix. Given this neural network-based mathematical model of the uncertain system, a singularity-free feedback linearization control law is developed in order to compel the system state to follow a reference trajectory. By means of Lyapunov-like analysis, the exponential convergence of the tracking error to a bounded zone can be proven. Likewise, the boundedness of all closed-loop signals can be guaranteed.

RESUMEN

Neural networks (NNs) have numerous applications to online processes, but the problem of stability is rarely discussed. This is an extremely important issue because, if the stability of a solution is not guaranteed, the equipment that is being used can be damaged, which can also cause serious accidents. It is true that in some research papers this problem has been considered, but this concerns continuous-time NN only. At the same time, there are many systems that are better described in the discrete time domain such as population of animals, the annual expenses in an industry, the interest earned by a bank, or the prediction of the distribution of loads stored every hour in a warehouse. Therefore, it is of paramount importance to consider the stability of the discrete-time NN. This paper makes several important contributions. 1) A theorem is stated and proven which guarantees uniform stability of a general discrete-time system. 2) It is proven that the backpropagation (BP) algorithm with a new time-varying rate is uniformly stable for online identification and the identification error converges to a small zone bounded by the uncertainty. 3) It is proven that the weights' error is bounded by the initial weights' error, i.e., overfitting is eliminated in the proposed algorithm. 4) The BP algorithm is applied to predict the distribution of loads that a transelevator receives from a trailer and places in the deposits in a warehouse every hour, so that the deposits in the warehouse are reserved in advance using the prediction results. 5) The BP algorithm is compared with the recursive least square (RLS) algorithm and with the Takagi-Sugeno type fuzzy inference system in the problem of predicting the distribution of loads in a warehouse, giving that the first and the second are stable and the third is unstable. 6) The BP algorithm is compared with the RLS algorithm and with the Kalman filter algorithm in a synthetic example.

Asunto(s)