RESUMEN

The rupture of the Fundão dam released about 50 million m3 of mining tailings in the Doce river basin. To assess the potential for environmental contamination and the risks of residual exposure of the human population generated by these tailings, water and fish samples from the Doce river were collected 25 days after the accident and analyzed the physicochemical parameters of the water and levels of metals by ICP-MS, in addition to the temporal variability of the concentration of these elements through other studies. This was the first study to carry out an assessment of the health risk associated with the consumption of fish contaminated by metals from the areas affected by the disaster. The values of turbidity (5460 NTU), electrical conductivity (74.8 µS cm-1), total dissolved solids (892 mg L-1) and total suspended solids (772 mg L-1) were above the maximum limit allowed by Brazilian legislation, due to the presence of large amounts of solid materials released after the dam rupture. The analysis of metals in water samples indicated high concentrations of Al (1,906.71 µg L-1), Mn (370.32 µg L-1), Fe (8,503.50 µg L-1) and Hg (34.25 µg L-1), while for the fish samples, only As (1,033.98 µg kg-1) and Hg (herbivorous: 505.32 µg kg-1; predatory: 1,184.09 µg kg-1) presented levels above those established by Brazilian legislation. The health risk assessment showed that the estimated daily intake for Hg was higher than the reference dose, reinforcing the need for monitoring the area affected by the disaster.

Asunto(s)

RESUMEN

Organophosphates (OPPs) are an important element of modern agriculture; however, because they are being used excessively, their residues are leaching and accumulating in the soil and groundwater, contaminating aquatic and terrestrial food chains. An important OPP called disulfoton is frequently used to eradicate pests from a wide range of crops, including Brazil's coffee crops. Additionally, it does not easily degrade in the environment, and as such, this compound can slowly build up in living organisms such as humans. Moreover, this compound has been classified as "extremely hazardous" by the World Health Organization. This study evaluated the degradation efficiency of disulfoton using a Fenton-like reaction catalyzed by magnetite nanoparticles and determined the toxicity of the by-products of the degradation process using the bioindicator Allium cepa. Further, the removal efficiency of disulfoton was determined to be 94% under optimal conditions. On the other hand, the Allium cepa bioassay showed different toxic, cytotoxic, genotoxic, and mutagenic outcomes even after the remediation process. In conclusion, the Fenton process catalyzed by magnetite nanoparticles presents great efficiency for the oxidation of disulfoton. However, it is important to highlight that the high degradation efficiency of the Fenton-based process was not sufficient to achieve detoxification of the samples.

Asunto(s)

RESUMEN

There exists a high demand for fast, simple, and reliable methodologies for determining the presence of organochlorine pesticides (OCPs) on environmental samples. Moreover, the toxicity and accumulation of potential OCPs in several environments have led to the development of technologies that achieve their removal from contaminated waters. In this study, a novel method combining a dispersive liquid-liquid microextraction procedure based on the solidification of floating organic drop is developed and validated for the extraction, preconcentration, and determination of 10 OCPs: α-BHC, p,p'-DDE, δ-BHC, dieldrin, p,p'-DDT, endosulfan I, endosulfan sulfate, heptachlor, heptachlor epoxide (isomer B), and methoxychlor in water samples. The results show that the calibration curves were linear for all the studied compounds, and the coefficients of correlation higher than 0.99. The variation coefficient for precision and accuracy was lower than 10%, and the accuracy ranged from 93 to 105%. Low limit of detection and limit of quantification values ranging from 0.06-3.00 ng mL-1 and 0.20-10 ng mL-1 were obtained, respectively. The capability of the proposed method was confirmed using an analysis of the water samples before and after the degradation process; this was achieved by employing nanomaterials, while performing an analysis of 160 real samples that were sourced from a Brazilian river. A cobalt-doped magnetite was applied for the environmental remediation of the studied compounds, and it was verified that the novel material has the potential to be used in environmental remediation with a degradation efficiency exceeding 80% for the majority of the studied compounds.

Asunto(s)

RESUMEN

RESUMO Estudos demonstram que a utilização do cloro em estações de tratamento de água (ETA) pode contribuir para a formação de subprodutos orgânicos halogenados indesejados, tais como os trialometanos (TAM), quando há presença de matéria orgânica algogênica, composta de algas e cianobactérias. A Microcystis aeruginosa é uma espécie de cianobactéria com frequentes registros em eventos de florações no país e é relacionada com a formação de TAM durante a cloração da água. Desse modo, este estudo teve como objetivo o desenvolvimento e a validação do método analítico por extração líquido-líquido para detecção e quantificação de TAM por cromatografia gasosa acoplada à espectrometria de massas (ELL-CG-EM), bem como a aplicação deste para avaliar a formação de TAM em ensaios de cloração de células de Microcystis aeruginosa, simulando situações em ETA. O método obteve baixo tempo de análise (< 12 minutos), excelente seletividade, precisão, repetitividade e sensibilidade, com possibilidade de aplicação para análises de rotina em detrimento de outras técnicas consideradas mais automatizadas. Foram observadas alta demanda de cloro durante os ensaios e elevada concentração dos subprodutos quando submetida à dose de cloro gasoso (Cl2) de 2,5 e 5 mg.L-1, com destaque para o triclorometano, sendo outras espécies de monitoramento obrigatório não detectadas ou não formadas, o que pode ser justificado pela ausência de bromo.

ABSTRACT Studies have shown that the use of chlorine in water treatment plants (WTPs) can contribute to formation of undesirable halogenated organic by-products, such as trihalomethanes (THMs), when algae and cyanobacteria are present. Microcystis aeruginosa is a cyanobacteria specie with frequent recordings of flowering events in the country and is related to the formation of THMs during water chlorination. Thus, the objective of this study was to develop and validate Liquid-Liquid Extraction the analytical method for detection and quantification of THMs by gas chromatography coupled to mass spectrometry (LLE-GC-MS), as well as the application of the method to evaluate the formation of TAMs from Microcystis aeruginosa cells chlorination tests, simulating situations in WTPs. The method obtained low time of analysis (< 12 minutes), excellent selectivity, precision, repeatability and sensitivity, with possibility of application for routine analysis to the detriment of other techniques considered more automated. High chlorine demand was observed during the tests and high concentration of by-products when submitted to the chlorine gas (Cl2) dose of 2.5 and 5 mg.L-1, with emphasis on trichloromethane. Other species of mandatory monitoring were not detected or not formed, justified by the absence of bromine.

RESUMEN

In this study, a method was developed to evaluate the degradation of haloacetic acids (HAAs) in water by a heterogenous Fenton-like process catalyzed by cobalt-doped magnetite nanoparticles (Fe3 - xCoxO4), extraction of the contaminants by liquid-liquid extraction (LLE), and analysis by gas chromatography-mass spectrometry (GC-MS). The developed method was efficient in the degradation of HAAs, with the following degradation values: 63%, 62%, 30%, 39%, 37%, 50%, 84%, 41%, and 79% for monochloroacetic acid, monobromoacetic acid, dichloroacetic acid, trichloroacetic acid, bromochloroacetic acid, dibromoacetic acid, bromodichloroacetic acid, dibromochloroacetic acid, and tribromoacetic acid compounds, respectively. Through the application of the Allium cepa test, the cytotoxicity, genotoxicity, and mutagenicity of HAAs were evaluated. The results confirm its genotoxic and mutagenic effects on Allium cepa meristematic cells. Through this study, it was possible to verify the effectiveness of the developed method and its potential as a proposal for environmental remediation.

Asunto(s)

RESUMEN

An analytical liquid-liquid extraction-gas chromatography-mass spectrometry (LLE-GC-MS) method was developed and validated for the determination of trihalomethanes (THMs) in environmental samples. The compounds studied were trichloromethane (TCM), bromodichloromethane (BDCM), dibromochloromethane (DBCM), and tribromomethane (TBM). The calibration curves for the THMs showed high linearity in the range of 1-1000 µg L-1. Studies of intra-day and inter-day precision, limit of detection (LOD), limit of quantification (LOQ), accuracy, and recovery were performed with low (10 µg L-1), medium (40 µg L-1), and high (200 µg L-1) concentrations of THMs. The intra-day and inter-day precision RSD varied in the ranges of 0.17-6.95% and 0.26-15.70%, respectively. No statistical differences were observed between the analysis of the concentration of certified reference materials (CRM 4M8140-U) and the values reported by CRM, indicating the good accuracy of the proposed method. The recovery was 88.75-119.21%. The LOD and LOQ were smaller than 0.13 and 0.40 µg L-1. Compared with reported LLE-GC-MS methods, the validated method had similar LOD and enhanced LOQ, precision, accuracy, and recovery. Also, the method is robust, selective to THMs, and the total time for the extraction and GC separation of THMs is about 18 min. The method was useful for detecting and quantifying low concentrations of TCM (40-80 µg L-1) formed by water chlorination in the presence of Microcystis aeruginosa cyanobacteria, thus demonstrating its applicability for monitoring THMs in real samples.

Asunto(s)

RESUMEN

Using dual-photoelectrode photoelectrochemical (PEC) devices based on earth-abundant metal oxides for unbiased water splitting is an attractive means of producing green H2 fuel, but is challenging, owing to low photovoltages generated by PEC cells. This problem can be solved by coupling n-type BiVO4 with n-type Bi4 V2 O11 to create a virtual p/n junction due to the formation of a hole-inversion layer at the semiconductor interface. Thus, photoelectrodes with high photovoltage outputs were synthesized. The photoelectrodes exhibited features of p- and n-type semiconductors when illuminated under an applied bias, suggesting their use as photoanode and photocathode in a dual-photoelectrode PEC cell. This concept was proved by connecting a 1 mol % W-doped BiVO4 /Bi4 V2 O11 photoanode with an undoped BiVO4 /Bi4 V2 O11 photocathode, which produced a high photovoltage of 1.54 V, sufficient to drive stand-alone water splitting with 0.95 % efficiency.

Asunto(s)

RESUMEN

The conversion of solar energy into hydrogen fuel by splitting water into photoelectrochemical cells (PEC) is an appealing strategy to store energy and minimize the extensive use of fossil fuels. The key requirement for efficient water splitting is producing a large band bending (photovoltage) at the semiconductor to improve the separation of the photogenerated charge carriers. Therefore, an attractive method consists in creating internal electrical fields inside the PEC to render more favorable band bending for water splitting. Coupling ferroelectric materials exhibiting spontaneous polarization with visible light photoactive semiconductors can be a likely approach to getting higher photovoltage outputs. The spontaneous electric polarization tends to promote the desirable separation of photogenerated electron- hole pairs and can produce photovoltages higher than that obtained from a conventional p-n heterojunction. Herein, we demonstrate that a hole inversion layer induced by a ferroelectric Bi4V2O11 perovskite at the n-type BiVO4 interface creates a virtual p-n junction with high photovoltage, which is suitable for water splitting. The photovoltage output can be boosted by changing the polarization by doping the ferroelectric material with tungsten in order to produce the relatively large photovoltage of 1.39 V, decreasing the surface recombination and enhancing the photocurrent as much as 180%.

Asunto(s)